Wurth #8 x 7/16 Truss Head Screw For Hinge And Slide
Wurth #8 x 7/16 truss head screw is a low truss head Phillips drive screw designed for hinge and drawer slide installation, so it fastens hardware while keeping a low profile against cabinet components. The sharp point coarse thread cuts quickly into typical cabinet materials, which speeds hinge and ball bearing slide installation on the bench or in the field. The zinc finish provides a clean, consistent appearance around installed hardware, which helps hardware layouts look uniform across a project. The screw uses #2 Phillips drive bits, so it matches a common driver size used in cabinet and woodworking workstations. This screw is described for use on ball bearing slides such as KV and Accuride, which supports straightforward slide mounting using familiar layouts. Case hardened construction supports use in typical woodworking fastener applications where a truss head pattern is needed.
Key Details Of This Truss Head Installation Screw
- The #8 x 7/16 length format fastens hinges and drawer slides while keeping penetration shallow, which helps when working in cabinet sides and drawer members where excess length would be undesirable.
- The low truss head profile sits broader and flatter against the hardware, which spreads bearing surface on hinge and slide flanges for more stable clamping during installation and adjustment.
- The Phillips drive head uses #2 Phillips drive bits, which fits directly with standard bits used on most cabinet assembly drivers and reduces time spent changing or sourcing specialty bits.
- The sharp point coarse thread is suited to driving into common cabinet substrates, which helps the screw bite quickly and pull hardware tight with fewer passes during assembly or retrofit work.
- The zinc finish is one of the finishes listed for this screw, which supports a consistent look when matching other zinc finished fasteners in hinge rows and drawer slide runs.
- The screw is case hardened according to the description, which supports use in routine hardware fastening where a hardened screw is preferred for repeated driving and snug seating.
Installation Traits For Hinge And Slide Fastening
The #8 diameter with 7/16 length works with many hinge and slide hole patterns, so it seats reliably without projecting excessively through typical case materials. The low truss head style bears firmly on hinge and ball bearing slide mounting holes, which helps keep hardware from shifting while other screws are driven. The sharp point and coarse thread style advance quickly into common cabinet materials, which can shorten installation time on production runs. Using #2 Phillips drive bits means drivers set up for other cabinet screws can drive this fastener without changeover, which supports continuous workflow at the bench. The zinc finish coordinates with zinc finished hinges and slides, so exposed screw heads around hardware look visually consistent across a project.
Using This Wurth Truss Head Screw In Cabinet Work
Where This Hinge And Slide Screw Performs Best
This Wurth low truss head screw is described specifically for use on ball bearing slides such as KV and Accuride, which positions it for slide installation on drawers and pull-outs. The low truss head pattern covers slide and hinge mounting holes well, which helps clamp the hardware flange firmly against cabinet sides, drawer boxes, or face frame brackets. The #8 x 7/16 size suits many cabinet and drawer constructions, so it can be used across matching hinge and ball bearing slide locations in the same project. The zinc finish aligns with zinc finished hardware, which keeps visible fastener heads looking coordinated inside cabinets and drawers. Case hardened construction supports routine cabinet shop use where the same screw style is driven repeatedly into production work.
Details That Support Repeatable Installation Results
The Phillips drive that uses #2 Phillips drive bits gives installers a familiar interface, which supports consistent driver engagement and reduces cam-out when seats are snugged. The sharp point coarse thread engages quickly in typical cabinet materials, which pulls hinges and slides tight without extended driving time. The low truss head shape provides a broader bearing surface on hinge and slide flanges, which helps hardware stay properly aligned as additional screws are installed in a pattern. The compact 7/16 length keeps threaded engagement within the material and hardware stack, which helps maintain a neat interior surface around cabinet cases and drawer members. The combination of case hardened construction, zinc finish, and coarse thread design helps this screw serve as a standard choice for repeated hinge and ball bearing slide fastening in woodworking environments.
Common Questions About This Wurth Installation Screw
What type of projects is this Wurth hinge and drawer slide screw described for?
This Wurth #8 x 7/16 truss head screw is described for use on ball bearing slides such as KV and Accuride and for hinge and drawer slide installation in cabinet work.
How does the low truss head design help during hardware installation?
The low truss head design spreads bearing surface over hinge and slide flanges, which helps hold hardware flat and aligned against cabinet components during fastening.
What driver bit works with this Phillips drive truss head screw?
This truss head installation screw uses #2 Phillips drive bits, which fits common driver setups in cabinet and woodworking shops.
Why is the #8 x 7/16 size useful for hinges and drawer slides?
The #8 x 7/16 size seats into many hinge and slide hole patterns while keeping the screw short, which suits typical cabinet sides and drawer members.
What benefit does the sharp point coarse thread provide?
The sharp point coarse thread lets the screw bite quickly into common cabinet materials, which helps pull hinges and slides tight with efficient driving.
How does the zinc finish relate to typical cabinet hardware?
The zinc finish matches zinc finished hardware options, which helps visible screw heads around hinges and ball bearing slides appear consistent in the installation.
Select This Screw For Hinge And Slide Runs
This Wurth #8 x 7/16 low truss head Phillips drive screw pairs hinge and drawer slide installation with a familiar #2 Phillips interface, which supports steady driver control. The sharp point coarse thread and case hardened construction support repeated fastening on ball bearing slides such as KV and Accuride in cabinet projects. The zinc finish aligns with common zinc finished hardware, which keeps exposed fastener heads visually consistent across hinge lines and drawer slide layouts. Selecting this screw for hinge and slide locations standardizes hardware fastening around the shop, which can streamline cabinet production and installation workflows.
