
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Würth #6 x 3/4" flat head assembly screw delivers a zinc-plated finish alongside a sharp point, coarse thread, and #2 square drive in a size built for high-volume cabinet and furniture assembly. At 3/4" long with a flat countersunk head, this screw is sized for attaching back panels, thin cabinet components, and light wood-to-wood joints where a flush finish matters.
A 3/4" flat head screw in #6 gauge is a workhorse size for attaching thin components flush: cabinet backs to box frames, light trim strips, thin drawer-box parts, and panel-to-panel joints where the head needs to disappear below the surface. The coarse thread grabs quickly in softwood, pine, and lighter engineered panels like plywood and thin particleboard. The sharp point self-starts without a pilot hole in those materials, keeping production moving when a pilot step would only slow things down. For harder stock or hardwood, a pilot hole is the cleaner choice to avoid surface tear-out around the head.
The zinc plating on this screw protects the steel shank and head against light corrosion in dry indoor environments, which covers the vast majority of cabinet shop and furniture manufacturing applications. The lubricated surface works alongside the zinc coating to reduce the friction load on the bit during repetitive driving, which matters when a shop is running thousands of fasteners per shift. Zinc-plated screws are an indoor finish; this screw is not intended for exterior applications or contact with pressure-treated lumber.
A box of 15,000 screws suits shops that use this size consistently across multiple product lines. Cabinet manufacturers assembling backs, furniture shops joining light subassemblies, and millwork operations attaching thin panels all go through 3/4" flat head screws in quantity. The #2 square drive holds the bit more positively than a Phillips in a powered driver, which reduces the cam-out and head-stripping that can slow a production line. The flat head seats flush without a separate countersink operation in most softwood and panel applications, which is one fewer step per joint.
In softwood and most panel stock, the flat head will seat close to flush as it drives without a separate countersink. In harder materials or where a precise flush finish is required, cutting a countersink first gives a cleaner result.
The lubricated surface reduces driving friction, which lowers the torque needed to seat the screw. In high-volume production runs this helps reduce bit wear and motor load on the driver, and it makes seating more consistent across a shift.
The coarse thread and sharp point are better suited for softwood, plywood, and lighter engineered panels. For particleboard or MDF, a chipboard-thread screw with a coarser, deeper thread profile typically provides better pull-out resistance in those lower-density materials.
A #2 square (Robertson) bit fits the drive recess on this screw. Use a correctly sized bit for the best engagement; an undersized or worn bit reduces the torque transfer and increases the chance of stripping the recess.
No. The zinc finish is rated for dry indoor environments. For exterior work or contact with pressure-treated lumber, choose a screw with a heavier corrosion-resistant coating such as hot-dip galvanized or a rated exterior finish.
When the job calls for a flush-seating, zinc-plated flat head screw in a production quantity, this #6 x 3/4" assembly screw covers the application cleanly, from the first joint to the last one in the box.
Sold In: 15000 Each