DH Caster 6" Plate Mount Rigid Caster, 800 lb, C-MHD6PNR

DH Casters Rigid Caster With 6 Inch Wheel Use

DH Casters rigid caster with 6" wheel, plate mount - C-MHD6PNR is a plate mounted caster designed for applications that need a fixed rolling path. The rigid design keeps the wheel tracking straight, which helps when moving loads in defined lanes or alongside benches. The caster belongs to the plate mounted casters category, so it mounts using a top plate interface rather than a stem, fitting equipment frames built for plate hardware. The 6" wheel size gives a larger contact area than smaller wheels, which is useful where floor joints or minor debris could otherwise interrupt motion. This model is identified as heavy duty in the SAP description, signaling a build intended for demanding shop or material-handling environments where frequent rolling under load is expected. The caster is supplied by Wurth Baer Supply, a distributor focused on the woodworking industry, aligning it with carts, fixtures, and equipment common in that setting.

Key Details That Support Heavy Duty Caster Work

• The SAP description states 6' heavy duty, rigid, phenolic/ 800 lbs, which indicates a phenolic wheel capacity of 800 lbs and supports use on substantial shop carts or equipment where load ratings are critical for planning.
• The web description notes wheel material available in Molden Rubber (rubber & steel) and Phenolic, giving a choice between phenolic and molded rubber construction so specifiers can match wheel type to flooring and rolling behavior expectations.
• The listed wheel diameter from 4" to 6" means this series covers multiple sizes, so the 6" version can align with existing gear while other diameters in the family can be used where lower overall height or tighter clearances are required.
• The leg double welded for extra strength statement shows the caster yoke uses double welds, which supports structural integrity at the fork, important where casters are repeatedly driven over transitions or into stops in busy shops.

Plate Mount Caster Setup And Fit Considerations

The product class is specified as plate mount, so this caster relies on a mounting plate interface that fastens directly to the base of the cart or equipment frame. Using a plate mount style suits shop-built carts or machinery stands that already incorporate flat mounting pads sized for plate mounted casters. The rigid construction means the fork does not swivel, so two or more units can be positioned parallel to establish a straight rolling line, which helps when moving long or heavy fixtures in corridors or between work cells. The 6" wheel designation keeps the load higher off the floor compared to smaller diameters in the same series, which helps when navigating common floor transitions such as expansion joints or shallow thresholds in woodworking facilities.

Using This 6 Inch Heavy Duty Rigid Phenolic Caster

Where This Plate Mounted Caster Fits Best

The category listing as builders hardware and plate mounted casters places this product in applications where casters form part of a broader hardware solution on shop fixtures, cabinets, or handling carts. The DH Casters branding connects it to a caster-specific manufacturer, which is relevant when matching this 6" phenolic model to existing DH Casters installations identified by part number C-MHD6PNR. The phenolic wheel option described in the SAP as phenolic/ 800 lbs ties the wheel material directly to the load capacity, supporting use on equipment in woodworking shops where dense loads such as sheet goods or solid stock are staged. The 6" diameter within a family that ranges from 4" to 6" makes this version suitable when a bit more ground clearance and easier starting over minor floor irregularities are useful, while still keeping overall cart height manageable around benches and machines.

Details That Support Repeatable Mounting Results

The product class designation plate mount and the web description reference to plate mount indicate a flat plate interface, which helps installers position each caster consistently at the corners of frames or carts. This style suits fabrication patterns where hole locations on multiple frames are duplicated, because the same plate pattern can be applied across projects. The rigid construction specified in the SAP description means the fork remains fixed relative to the mounting plate, which helps predict wheel tracking during layout so installers can align multiple rigid units for straight-line motion. The mention that the leg is double welded for extra strength indicates a reinforced fork-to-plate structure, which supports long-term alignment of the wheel under load in repetitive shop service. The heavy duty designation in the SAP description gives additional context for choosing this caster where duty cycles and weights approach the stated 800 lbs phenolic capacity, helping planners select casters in line with expected service conditions.

Common Questions About The C-MHD6PNR Rigid Caster

Selecting This DH Casters Plate Mount For Your Carts

The DH Casters rigid caster with 6" wheel, plate mount - C-MHD6PNR combines a heavy duty, rigid design with a phenolic wheel rated at 800 lbs, matching demanding material-handling or woodworking-cart roles. The plate mount class ties directly into flat-frame cart bases commonly used in shops supplied by Wurth Baer Supply. The caster family coverage from 4" to 6" wheel diameters and wheel material options of Molden Rubber (rubber & steel) and Phenolic, as described in the web description, give specifiers a coherent set of choices for new builds or upgrades.