Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster with 5 inch wheel gives you a heavy duty plate mount wheel that supports demanding shop and jobsite movement. The 5 inch wheel size provides a practical rolling diameter that works well under cabinets, carts, and fixtures where ground clearance matters without pushing work surfaces too high. The plate mount design creates a broad contact area with the mounting surface, which helps spread load forces and support stable rolling when equipment is fully loaded. This caster is classified as plate mount in the builders hardware plate mounted casters category, so it fits projects where a flat mounting surface on cabinets or shop-built bases is available. The swivel function allows the wheel to rotate around a vertical axis, which lets equipment turn in tighter spaces and improves maneuvering around benches and machines.
This plate mount caster belongs to the plate mount product class, so it fastens by a flat plate against the mating surface, giving installers a predictable mounting footprint on cabinet bases or equipment frames. The swivel design lets the wheel pivot as loads change direction, which shortens turning paths and aids positioning near walls or machinery during layout work. The 5 inch wheel diameter works within the specified 4 inch to 6 inch wheel diameter family, so crews can standardize their build heights across different carts by pairing this caster with matching sizes. The heavy duty designation, supported by the 900lb capacity figure, helps planners assign appropriate caster counts under larger assemblies where load distribution is part of the layout.
This DH Casters plate mounted swivel caster fits into builders hardware projects that rely on plate mounted casters, such as mobile cabinets, shop carts, and material handling fixtures with flat base pads. The plate mount design works well on welded steel frames or plywood bottoms where a broad mounting area reinforces the connection, which helps maintain caster alignment over time. The 5 inch wheel size, sitting in the 4 inch to 6 inch diameter family, suits applications that need mobility without raising the center of gravity too high, which matters when moving tall cabinetry or stacked material in tighter aisles. With wheel material available in molded rubber, combining rubber and steel, this caster can be specified where floors benefit from a slightly softer tread interface, helping rolling feel more controlled over typical shop debris.
The wheel material available in phenolic supports situations where a harder wheel is preferred, which can help resist deformation under higher static loads and sustain easier starting movement when equipment sits loaded between uses. The heavy duty description supported by a 900lb capacity rating keeps this caster in the range appropriate for substantial pieces of shop equipment, so fixture designers can use fewer casters per base when their structures and load planning align with the rating. The leg double welded for extra strength detail supports work environments where casters see lateral forces from pushing, pulling, and swiveling, because reinforced legs help maintain the fork geometry during repeated maneuvers. Together, these verified characteristics position this caster for serious shop builds where mobility and load handling must work reliably across many repositioning cycles.
The manufacturer part number C-MHD5PNS ties directly to this specific 5 inch DH Casters swivel caster, which helps shops standardize replacements so every corner of a cart or cabinet uses matching wheel behavior and height. The builders hardware plate mounted casters category placement indicates this caster is targeted at structural and cabinetry type builds, helping project planners align it with wood and metal base designs instead of lighter-duty furniture units. The 900lb capacity figure provides a concrete load value that supports clear planning for how many units to mount under heavy fixtures, which helps maintain rolling performance when carts carry tools, parts, or stacked panels.
The availability of molded rubber and phenolic wheel materials means the same core swivel plate mount format can be matched to different rolling characteristics, which supports consistent mounting geometry while tuning how the wheel interacts with the floor. The double welded leg construction reinforces the interface between the fork and wheel, which matters during frequent swiveling, because weld strength at these points influences how well the caster tracks and rotates under offset loads. The 4 inch to 6 inch wheel diameter family context lets designers pair this 5 inch size with others in the range on related equipment, which helps keep handling feel and floor clearance similar across a shop fleet. Sourcing this caster through Wurth Baer Supply connects it to a distributor focused on the woodworking industry, which aligns the product with typical cabinet hardware and shop-build workflows.
The DH Casters swivel caster with 5 inch wheel fits builders hardware applications using plate mounted casters, such as mobile cabinets, shop carts, and fixtures with flat mounting pads.
The 5 inch wheel diameter, within the 4 inch to 6 inch family, offers ground clearance and rolling ease while keeping work surfaces at practical heights for cabinetry and shop equipment.
The C-MHD5PNS caster has a 900lb capacity, which supports heavier carts or fixtures when planners distribute total loads across an appropriate number of plate mounted casters.
This caster offers wheel material available in molded rubber, combining rubber and steel, and phenolic, allowing selection between a slightly softer or harder rolling interface.
The leg double welded for extra strength reinforces the caster fork joints, helping the assembly handle repeated swiveling and side loads on shop carts and equipment.
The swivel function lets the caster rotate around a vertical axis, so carts and cabinets turn more easily in tight spaces or along irregular shop traffic paths.
The DH Casters swivel caster with 5 inch wheel, plate mount, 900lb capacity provides a defined combination of wheel size, material options, and plate class for heavy duty mobility projects. The availability of molded rubber and phenolic wheel materials lets crews match tread behavior to floor conditions while keeping the same core mounting footprint. The double welded leg construction and heavy duty designation support repeated use under substantial working loads. For shop-built cabinets, carts, or fixtures needing stable plate mounted casters, this C-MHD5PNS model from Wurth Baer Supply offers a clearly specified option to integrate into new builds or planned upgrades.
Sold In: 1 Each
