DH Caster 8" Plate Mount Swivel Caster, With Brake, 1,000 lb, C-MHD8PNSB

DH Casters Swivel Caster For Heavy Loads

DH Casters swivel caster is a plate mount unit rated at 1000 lb capacity, so it handles demanding material handling jobs where a single caster must support substantial weight. The 8 inch wheel diameter keeps carts and equipment rolling smoothly over longer runs, which helps when moving loads through larger warehouse or shop floors. A 2 inch tread width spreads the load across more floor surface, reducing point pressure as heavy platform trucks or carts are steered. The phenolic wheel type provides a hard rolling surface that tracks predictably under weight, which is valuable when positioning containers or automotive equipment in tighter areas. A swivel design lets the caster rotate under the load, allowing equipment to change direction in aisles and around obstacles. An integrated brake locks the wheel during loading or unloading, helping equipment stay put while work is performed.

Key Caster Details That Support Daily Use

• The 1000 lb load capacity allows a single caster to carry substantial weight, so multi-caster setups can support fully loaded platform trucks or distribution carts without overloading any one point.
• The 8 inch wheel diameter helps the caster roll more easily under heavy loads, which reduces effort when moving flatbed carts or containers across warehouse floors or shop spaces.
• The 2 inch tread width stabilizes the wheel footprint, which supports smoother tracking when steering automotive equipment or warehouse equipment around corners or through aisles.
• The phenolic wheel type offers a hard rolling surface that maintains its shape under load, which supports consistent rolling behavior when equipment is parked loaded for extended periods.
• The plate mount style uses a defined plate size of 3-15/16 inch by 4-1/2 inch, so installers can match the caster footprint to the mounting area on trucks, carts, or equipment frames.
• The swivel configuration with brake lets the caster rotate for maneuvering, then hold position when locked, which is useful during loading operations on platform trucks or distribution carts.

Plate Mount Swivel Design For Practical Installation

This caster uses a plate mount configuration with a plate size of 3-15/16 inch by 4-1/2 inch, giving installers a fixed mounting footprint to work with when laying out hole patterns on cart or truck frames. The swivel type construction allows the caster to rotate under load, which is important when equipment must navigate tight turns or be repositioned in limited space. The 8 inch phenolic wheel works with the plate mount to create a stable, elevated rolling point, supporting clearance for platform trucks, flatbed carts, and similar equipment referenced in the applications list. With a 2 inch tread width and 1000 lb capacity, the caster is built to stay within its rated load in typical four-caster installations for heavier carts or containers.

Using This Caster On Carts And Equipment

Where This DH Casters Swivel Caster Performs Best

The stated applications for this caster cover platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and warehouse equipment, so it is suited to general material handling in industrial or commercial settings. On platform trucks and flatbed carts, the 1000 lb load capacity per caster allows builders to configure multi-caster layouts that support full loads during transport. For containers and automotive equipment, the 8 inch phenolic wheel offers a firm rolling surface that stays consistent when equipment remains loaded, helping moves start smoothly. In distribution carts and warehouse equipment, the swivel design helps operators navigate aisles, while the brake holds the wheel when carts are staged. The plate mount style with a 3-15/16 inch by 4-1/2 inch plate size supports use on welded or bolted frames where a defined mounting footprint is preferred.

Why The 1000 lb Rating And Construction Matter

The 1000 lb load capacity directly affects how this caster can be used in multi-caster configurations, allowing equipment designers to size carts and trucks around known weight limits. The 8 inch wheel diameter and 2 inch tread width combine to give a rolling surface that handles heavier loads without sinking as readily into typical shop or warehouse floors, which supports more consistent steering. The phenolic wheel type maintains a hard profile under compression, which helps keep rolling resistance stable across repeated use with automotive equipment or containers. The swivel design with brake ties into daily workflow by allowing quick direction changes followed by positive wheel holding during loading or unloading. As a plate mounted caster, the defined plate size of 3-15/16 inch by 4-1/2 inch helps standardize mounting points on different pieces of warehouse equipment, supporting repeat builds or replacements using the same footprint on frames and trucks.

Common Questions About This DH Casters Model

Select This Caster For Heavy-Duty Material Handling

The DH Casters swivel caster with 8 inch phenolic wheel, plate mount construction, and 1000 lb load capacity is built for platform trucks, carts, and warehouse equipment listed in its applications. The 2 inch tread width and defined 3-15/16 inch by 4-1/2 inch plate size support stable mounting and predictable rolling behavior. With a swivel design, integrated brake, and phenolic wheel type, this caster provides controlled movement and holding for containers and automotive equipment. Select this model when a plate mounted caster is needed to support heavy loads in recurring warehouse, distribution, or shop-floor use.