Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster with 4 inch hard rubber wheel gives furniture and equipment a general duty rolling solution that supports up to 300lb capacity, so shop fixtures in factories and warehouses can be moved without dragging or lifting.
The plate mount design fixes the caster solidly to the equipment frame, which keeps the wheel tracking where it should under load and reduces movement at the mounting point when carts or stands are pushed across the floor.
The hard rubber wheel material used on this general duty caster provides a firm rolling surface, so the caster resists deformation under weight and keeps movement more predictable when equipment is parked or repositioned during work.
The swivel design on this DH Casters model lets the wheel rotate around a vertical axis, which allows tight turning in aisles and around machinery where straight-line rigid casters would be harder to maneuver in limited space.
The corrosion-resistant zinc plated finish on the caster hardware helps the assembly tolerate typical indoor factory and warehouse conditions, so the swivel and plate maintain appearance and function during day-to-day use around production dust and moisture.
This general duty caster is described as widely used in factories and warehouses on furniture and equipment, which aligns it with shop carts, workstations, and storage units that need regular repositioning without complex wheel setups.
This plate mount swivel caster from DH Casters is categorized as a plate mount product, so it is intended to fasten by a flat top plate to the underside of furniture or equipment frames used in factory and warehouse environments.
The general duty rating described for these casters places them in everyday shop and warehouse service, where carts, stands, or furniture are rolled for positioning and then left stationary while work or storage tasks are carried out nearby.
The swivel configuration allows the wheel assembly to rotate as equipment is pushed, which helps operators redirect loads in aisles or around benches without lifting corners or forcing rigid wheels to skid sideways on the floor.
The 4 inch hard rubber wheel works as part of this fit story by supporting the stated 300lb capacity while providing a consistent contact surface, so moveable bases stay responsive when workers push or pull them during routine tasks.
The description of applications as widely used in factories and warehouses on furniture and equipment places this caster in environments where rolling movement, basic corrosion resistance, and straightforward mounting are expected from the hardware.
The DH Casters swivel caster with 4 inch hard rubber wheel is listed as widely used in factories and warehouses on furniture and equipment, so it fits under shop worktables, mobile storage, or machinery bases that need general duty mobility.
The plate mount product class means the caster is intended to bolt to a flat surface on the equipment or furniture, which suits welded frames, laminated tops, or wood bases commonly found in woodworking, assembly, or storage areas.
The 300lb capacity rating gives this caster a role on carts or fixtures that carry moderate loads, so it works on general duty items that are moved by hand instead of being pushed by powered vehicles in heavy industrial service.
The hard rubber wheel material places this caster in applications where a firm wheel is preferred, so rolling remains responsive when operators reposition equipment, rather than flexing significantly as would happen with very soft wheel materials.
The corrosion-resistant zinc plated finish supports use in indoor factory and warehouse environments where humidity and dust are present, so the caster surface sheds typical shop grime more easily and keeps the swivel movement from being hindered by light oxidation.
The swivel design of this general duty caster allows the 4 inch hard rubber wheel to rotate around a vertical axis, which shortens turning radius when pushing furniture and equipment, helping workers line up carts precisely at benches or racks.
The 4 inch wheel diameter balances roll performance and equipment height, so the caster clears common floor transitions in warehouses while avoiding raising work surfaces excessively, which keeps existing ergonomic layouts usable in the shop.
The 300lb capacity interacts with the plate mount design by supporting distributed loads across the mounting plate area, which helps the caster handle everyday rolling and parking cycles without concentrating stress at a single point on the frame.
The corrosion-resistant zinc plated finish contributes to consistent workflow by limiting surface rust on the swivel and plate, so rotation and rolling feel similar from day to day instead of binding when exposed to indoor moisture or airborne dust.
The general duty classification and description as widely used in factories and warehouses indicate this caster is oriented toward frequent repositioning of furniture and equipment, which supports flexible layouts where machines, tables, and racks are rearranged to match changing jobs.
The combination of hard rubber wheel material, plate mount construction, swivel capability, and 300lb capacity defines a caster that suits routine movement of shop fixtures, so teams can reconfigure work areas and roll equipment into position as work orders change.
The DH Casters swivel caster C-GD40HRS uses a 4 inch hard rubber wheel, which supports general duty rolling while keeping equipment height moderate in factories and warehouses.
This general duty DH Casters swivel caster has a 300lb capacity, so it is suited to moderate furniture and equipment loads commonly rolled by hand in shop and warehouse environments.
The C-GD40HRS is a plate mount caster, meaning it fastens by a flat mounting plate to the underside of furniture or equipment frames for stable support.
This 4 inch hard rubber swivel caster is described as widely used in factories and warehouses on furniture and equipment, covering carts, workstations, and storage units.
The caster hardware has a corrosion-resistant zinc plated finish, which supports use in indoor factory and warehouse conditions where moisture and dust are present.
This caster belongs to a general duty caster group with wheel diameters from 2 to 4 inches and wheel materials such as hard rubber, plastic, and non-marking rubber.
The DH Casters swivel caster with 4 inch hard rubber wheel, 300lb capacity, and plate mount construction delivers a general duty option for factories and warehouses that rely on mobile furniture and equipment to keep work moving.
The corrosion-resistant zinc plated finish, hard rubber wheel material, and general duty classification position this caster as a practical choice when specifying or replacing wheels on carts, tables, or storage units that are pushed by hand.
For projects where a plate mounted, 4 inch hard rubber, general duty swivel caster matches the load and environment, the C-GD40HRS from Wurth Baer Supply offers a defined capacity and construction that align with everyday shop and warehouse demands.
Sold In: 1 Each
