485 Series 10" Double Slotted Shelf Bracket Zinc

485 Series 10 Inch Double Slotted Shelf Bracket Use

485 Series 10 inch double slotted shelf bracket is a Reeve Store Equipment Company RV485 model designed as part of a shelf standards and brackets system for closet, garage, and general shelving projects where a 10 inch bracket depth is needed. The bracket is typically used with the RV44 series standard, so it works as the supporting arm that locks into that upright to hold shelving in a slotted standard system. Material is 1/16 inch thick cold rolled steel, which provides a solid metal arm for supporting properly designed shelving loads in residential or light commercial storage layouts. The bracket is finished in Brillatone zinc, giving a zinc surface that suits utility storage environments such as closets or garages. As a 485 Series component, this 10 inch bracket fits into a family of lengths from 8 to 24 inches, so layouts can be planned with matching parts.

Key Shelf Bracket Details For Job Planning

• Reeve RV485 model bracket sits within a defined standards and brackets category, so it fits into shelving systems where installers are using coordinated shelf standards and bracket components for structured storage runs.
• 10 inch bracket length sets the nominal shelf support depth, helping installers choose shelving widths and spacing that match closet or garage layouts while keeping bracket projection consistent across the run.
• Weight rating of 335-710 lb per pair, based on bracket length, gives a defined load range so installers can plan shelf spacing and support counts for light to heavy-duty storage within the published performance band.
• Cold rolled steel construction at 1/16 inch thick provides a rigid metal support arm, which helps brackets carry vertical loads and resist bending in typical closet and garage shelving installations.
• Bracket has two engagement teeth to fasten standard to bracket, creating a positive connection in the slots that helps the bracket stay seated during loading and unloading of shelves along the standard.
• Shelf lip at the end of the bracket provides a formed edge at the front, which helps locate the shelf and reduce forward shifting during normal use in long shelving runs.

Installation And Fit Within Slotted Standards

This Reeve 485-10 double slotted shelf bracket is designed for use in long runs of shelving, so it can be repeated along RV44 series standards to build continuous storage lanes. The two engagement teeth are formed to fasten bracket to the standard, meaning the installer sets the teeth into the RV44 slots to create a mechanical lock between upright and arm before placing shelving. With a 10 inch length, the bracket projects a consistent distance from the standard, helping installers align shelf edges and maintain straight lines across multiple sections. The shelf lip at the end of the bracket forms a positive front edge that interacts with the shelf, so the shelf rests against a defined stop instead of just a flat arm. This bracket operates within the 335-710 lb per pair weight rating range for the series, so standard spacing can be chosen to keep shelf loads within that published performance.

Using The 485 Series Bracket In Shelving Runs

Where The RV485 Shelf Bracket Works Best

The Reeve 485 Series 10 inch double slotted shelf bracket fits into shelf, closet, and garage organization layouts that use slotted uprights and metal arms. It is part of the shelf standards and brackets product class, so it functions as the horizontal support in a vertical-standard system rather than a stand-alone wall bracket. Typical use is with RV44 series standards, where the bracket teeth engage the standard slots and create the core structure for long runs of shelving. Because the system belongs in the shelf, closet and garage organization category, it suits storage layouts that need repetitive supports along walls, such as continuous closet shelves, garage storage rows, or utility room shelving grids.

Details That Support Repeatable Shelf Installations

The 485-10 bracket carries a published weight rating of 335-710 lb per pair based on length, so when installers repeat brackets along a run they are building within a performance-tested system that can be scaled by adding more supports as layout demands increase. The 1/16 inch thick cold rolled steel body gives each bracket a stiff profile, which helps keep shelves level between standards when loads are applied in everyday storage use. Two engagement teeth connect the bracket to the slotted standard, which provides a mechanical interface that resists vertical and outward movement at the connection point during loading cycles. The Brillatone zinc finish on the bracket gives the steel a zinc surface, which suits utility interior environments and keeps the bracket appearance consistent across long runs in visible storage installations. The shelf lip at the end of the arm provides a formed front that helps align shelf stock along the row, supporting cleaner lines in finished closet or garage projects and helping reduce forward creep over time.

Common Questions About The Reeve 485-10 Bracket

Selecting The 485 Series Bracket For Your Layout

The Reeve 485 Series 10 inch double slotted shelf bracket zinc finish piece gives installers a defined 10 inch support arm within a coordinated shelf standards and brackets system. With an RV485 model that is typically used with RV44 series standards, it fits long shelving runs in closet or garage organization projects that call for slotted uprights. The 1/16 inch thick cold rolled steel body, double engagement teeth, and front shelf lip work together to hold shelves at a consistent depth. For projects planned around this Reeve standards and brackets family, this 485-10 bracket serves as the 10 inch support option in the run.