
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WDP Series swing-out pantry unit mounts directly to a cabinet door and swings the full-height storage rack out into the room when the door opens, putting every shelf within reach without digging through a deep cabinet interior.
Most pantry cabinet doors go to waste as blank panels. This swing-out unit converts that door into a tiered shelf rack that travels with the door when it opens. When the door swings out, every shelf rotates into the room and faces forward, so items stored on the top shelf are as reachable as items stored on the bottom. There is no leaning in, no moving one container to reach another. The unit swings, you pick, the door closes. For a tall pantry cabinet where depth is available but door storage has been ignored, this is the missing piece.
The unit is built in maple, a close-grained hardwood that takes stain evenly and paints cleanly. Because the cabinet door is usually finished to match the rest of the kitchen, the maple construction allows this unit to be finished to coordinate rather than standing apart as a raw or plastic insert. The hardware pack ships with the unit and handles the door attachment and swing mechanism, so the install does not require sourcing separate brackets or fasteners.
Reach for this unit in a tall pantry cabinet where the door has enough height and depth to carry the rack, and where the cabinet opening meets the minimum dimensions above. It suits kitchens undergoing a full remodel as well as existing pantry cabinets that simply have an unused door. Cabinet shops building painted or stained pantry runs will find the maple surface straightforward to finish on the bench before install. Designers specifying organized pantry storage can use this unit to add a functional layer to the door without touching the cabinet box interior.
The unit mounts to the cabinet door and swings out as the door opens. The door itself carries the rack; no separate swing mechanism is built into the cabinet box.
Yes. The maple construction accepts paint and stain, so the unit can be finished to match or coordinate with the surrounding cabinetry before or after installation.
The cabinet opening must be at least 15-1/4 inches wide, 45-3/4 inches tall, and 4-1/4 inches deep. Measure the clear interior opening before ordering.
Yes. The hardware needed to mount the unit to the door is included.
This maple swing-out unit puts 45 inches of organized shelf storage on a pantry door that would otherwise go unused, with hardware included and a finish-ready surface that works with any kitchen finish scheme.
Sold In: 1 Each