Nickel Screw-On Hinge for Full Overlay Doors at 107 Degrees

This Blum CLIP top hinge mounts with screws to hang full overlay doors on face-frame or frameless cabinets, with a self-close spring and a 107 degree opening angle.

Key Features

• 107 degree opening angle delivers slightly wider swing than the standard 110 degree, keeping the door clear of adjacent walls or tight runs.
• Self-close spring draws the door shut automatically over the last few degrees of travel.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• Screw-on mounting fastens directly to the cabinet without needing pre-drilled 5mm system holes.
• Three-way adjustment dials height, side, and depth independently after the door is hung.
• Works on face-frame and frameless cabinets when paired with the appropriate Blum base plate, sold separately.

Where This Hinge Earns Its Place

Full overlay doors cover the cabinet side almost completely, and this hinge is built for exactly that geometry. The straight arm carries the door in the full overlay position, and the 107 degree opening angle gives practical access while keeping the swing a few degrees tighter than the standard 110 degree range. That difference matters on wall runs where doors might contact each other at full swing, on cabinets positioned near a wall or appliance, or anywhere the installer wants a modest angle limit without reaching for a restriction clip. The 35mm cup bores into the back of the door, and the arm clips to a Blum base plate mounted on the cabinet, ordered separately. Because this hinge uses screw-on mounting at the plate, it works on any cabinet regardless of whether 5mm system holes are present.

Steel Construction in a Nickel Finish

The hinge body is steel with a nickel finish. Screw-on attachment gives a mechanically straightforward connection that holds well in both solid-wood face frames and frameless panel sides. The self-close spring handles door closure reliably over years of daily use, and the three-way adjustment keeps all three planes of movement accessible after hanging, so doors can be brought back to an even reveal as the cabinet settles or the room shifts.

Who Reaches for This Configuration

Cabinet shops and installers who specify Blum and want a hinge that works without pre-bored system holes will reach for the screw-on version. It suits replacement work where the original cabinet has no line-bored holes, new construction on face-frame boxes where screw mounting is standard practice, and frameless runs where the shop simply prefers a screw connection over tool-free plate options. The nickel finish coordinates with brushed and polished pulls and knobs across a kitchen or bath. For a damped, cushioned close on the same door, the BLUMOTION soft-close version of this series is the next step up. For projects where the 5mm system holes are already in place and fast plate installation matters, the INSERTA plate version is the better pairing.

Common Questions

A Full Overlay Result, Screwed Solid

Specify this hinge when the job calls for full overlay doors in nickel, a self-close spring, and a screw-on connection that works on any cabinet regardless of system holes.