Right Hand Rear Plastic Socket for 230M Drawer Slide Blum 602300

Rear Mount Socket for Blum STANDARD 230M Epoxy Slides in Face-Frame Cabinets

This plastic rear mounting socket is the dedicated back-end support for Blum STANDARD 230M series epoxy drawer slides installed in face-frame cabinets. Where a frameless box lets a slide mount flush to the interior side panel front to back, a face-frame cabinet sets the panel back from the front frame — and without rear support, the back end of the slide has nothing to seat against. This socket closes that gap, giving the slide a secure rear anchor point so the drawer runs true from the first pull.

Key Features

• Series-matched fit: Engineered specifically for the Blum 230M slide series — not a generic socket that approximates the fit.
• Rear-mount position: Provides the back-end cabinet support that face-frame installations require when the slide cannot reach the rear panel directly.
• Plastic construction: Molded plastic body resists corrosion and installs without marring cabinet interiors.
• Compact form factor: Fits into the rear of the cabinet without competing for clearance with the drawer box.
• Sold as indicated pack quantity: Order in the quantity your job requires — these are a repeat-order staple for cabinet shops running face-frame work.

Where This Socket Fits the Job

Face-frame cabinet construction is the standard in traditional American kitchens, bath vanities, and built-in cabinetry. The solid wood frame on the front edges means the interior side panel is inset, and a slide mounted on the face frame's inner edge needs rear support to stay level and aligned through the full length of travel. This socket provides that rear anchor for the Blum 230M epoxy slide — the workhorse roller slide found throughout production cabinetry. Without it, the back end of the slide can shift or sag under a loaded drawer, shortening the slide's service life and making the drawer feel sloppy. With it, the slide is supported at both ends as the manufacturer intends.

Material and Construction

The socket is molded plastic — the appropriate material for this application. It does not need to carry the drawer's weight on its own; it locates and stabilizes the rear of the slide while the slide's own raceways handle the load. Plastic also means no finish compatibility issues inside painted or laminated cabinet interiors, and no rust in the damp conditions a kitchen cabinet occasionally sees.

Who Orders This and When

Cabinet shops building face-frame boxes with Blum 230M slides keep these sockets on the shelf as a standard consumable — every face-frame drawer opening that gets a 230M slide needs one. Installers retrofitting slides into existing face-frame casework reach for them when the original rear support is missing or damaged. Homeowners replacing worn-out slides in older kitchen or bath cabinetry will need them if the original installation used 230M slides in a face-frame box. If your cabinet is frameless and the slide runs directly on the side panel, you do not need this socket — it solves a face-frame-specific problem.

The Right Component Keeps the Whole Slide Working

A rear mount socket is an easy item to overlook until the drawer starts racking or the slide wears unevenly — at which point the fix costs more than the socket would have. Specify it alongside every 230M slide order going into face-frame cabinetry, and the installation goes in right the first time.