Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SP80 high temperature contact adhesive is a solvent-based, low VOC, non-chlorinated contact adhesive designed for professional bonding tasks where laminate, wood products, and other substrates need a strong, dependable hold. The formulation is specifically created for bonding high pressure laminate to particleboard, so installers can set countertops, casework, and panels with confidence that the laminate and core will stay aligned under load. Because this adhesive also bonds most metals, urethane foams, particle board, and many other materials, it supports building multi-material assemblies in one workflow instead of switching products. The canister system provides a smooth spray pattern, which helps lay down an even coat across sheet goods and edges. That smooth application reduces telegraphing on thin laminates, helping maintain a clean finished surface where any irregular glue pattern would otherwise show through.
This product is available in a canister system that provides a smooth spray pattern, giving installers a way to coat large laminate and substrate surfaces quickly and consistently. The adhesive is specifically formulated for bonding high pressure laminate to particleboard, so it addresses a core cabinet and countertop task where flat, continuous coverage is critical. Because it also bonds laminate, wood products, most metals, urethane foams, particle board, and many other materials, one adhesive can serve across casework interiors, tops, and trim details. SP80 is also available in an aerosol can for laminate repair and edge banding, which helps maintain the same bond characteristics on touch-up or field repair work as on shop-applied panels.
STA'-PUT SP80 is a contact adhesive in the Adhesives and Caulks category, so it fits naturally into woodworking workflows that depend on sheet laminate and engineered panels. It is specifically formulated for bonding high pressure laminate to particleboard, matching common countertop and cabinet construction where stable, flat bonding is essential for long spans and vertical panels. By bonding laminate, wood products, most metals, urethane foams, particle board and many other materials, SP80 supports building fixtures, casework, and decorative surfaces that mix substrates without switching adhesives mid-job. The water resistant bond helps assembled tops, doors, and panels handle routine moisture exposure in kitchens, baths, and work areas, keeping edges and corners seated. As a contact adhesive, it provides high strength, aggressive grab, and quick tack, letting parts reach handling strength quickly and reducing waiting time between spraying, mating, and moving assemblies.
The solvent-based, low VOC, non-chlorinated formula combines established contact adhesive behavior with reduced VOC levels, helpful where air handling or regulatory requirements influence product choice. High solids content creates a robust adhesive film, which supports long-term bond integrity between high pressure laminate and particleboard by maintaining a continuous layer rather than a thin skim. The canister system provides a smooth spray pattern, so coverage across large panels and edges stays even, which supports consistent tack and bond strength across the entire surface. That same smooth pattern reduces telegraphing on thin laminates, protecting the finished appearance of doors, drawer fronts, and thin decorative panels from shadowing or print-through. SP80 is also available in an aerosol can for laminate repair and edge banding, so edge details and small repair areas can match the bond performance and appearance of canister-applied main surfaces.
Sta-Put SP80 contact adhesive bonds laminate, wood products, most metals, urethane foams, particle board and many other materials, so one product supports varied assemblies in cabinet and laminate fabrication.
SP80 high temperature contact adhesive is available in a canister system that provides a smooth spray pattern, allowing even coverage on large laminate and substrate surfaces during shop or site work.
SP80 is specifically formulated for bonding high pressure laminate to particleboard, giving these common cabinet and countertop materials a strong, water resistant bond in regular service.
The water resistant bond of SP80 helps laminate and substrates stay adhered when exposed to routine moisture, limiting edge lift and surface failures on tops and panels.
High solids build a strong glue line while aggressive grab and quick tack let parts reach handling strength fast, supporting efficient production of laminated components.
The SP80 aerosol option is useful for laminate repair and edge banding, so small areas and edge details can be bonded with the same adhesive characteristics as larger sprayed surfaces.
Sta-Put SP80 high temperature contact adhesive combines a solvent-based, low VOC, non-chlorinated formulation with high solids and a water resistant bond, so it supports demanding laminate and particleboard work. The canister system delivers a smooth spray pattern that reduces telegraphing on thin laminates, helping projects maintain a clean, professional appearance. Because it bonds laminate, wood products, most metals, urethane foams, particle board and many other materials, the same product can serve across core assemblies and detail work. For shop or field bonding where high strength, aggressive grab, and quick tack matter, this contact adhesive aligns well with cabinet, countertop, and fixture fabrication routines.
Sold In: 1 Each
