Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sta'Put SP80 contact adhesive in the 140lb canister format is a high performance canister contact adhesive designed for professional use across a variety of substrates. This SP80 low VOC contact adhesive is formulated as high solids, so each 140lb canister provides a high yield that supports longer runs and fewer changeovers on the job. The adhesive sprays in a smooth spray pattern, which helps control coverage and reduces visible telegraphing when working with thin laminates. SP80 gives a water resistant bond, helping bonded assemblies handle typical moisture exposure in woodworking and casework environments. The bond is non-staining in common HPL applications, which protects decorative surfaces during fabrication. As a contact adhesive, it bonds both surfaces after drying to the proper tack range, supporting fast assembly once parts are aligned. The red color helps installers see coverage clearly during spray application for consistent results.
The SP80140R 140lb adhesive canister format is suited to spray application workflows where installers are bonding decorative laminates, metals not copper or its alloys, plywood, particle board, polyurethane foam, and rigid plastics. Because SP80 is a canister contact adhesive, it is designed to be dispensed through a spray system, so installers can apply a smooth spray pattern of adhesive across panels, edges, and components before bringing contact surfaces together. The high solids nature of the SP80 low VOC contact adhesive supports a high yield from each canister, which is helpful on larger laminate or panel runs. The water resistant, non-staining bond characteristic is particularly useful in common HPL applications where finished faces must remain clean and presentable after lamination.
Sta'Put SP80 contact adhesive is formulated for bonding a wide variety of materials, including decorative laminates, metals not copper or its alloys, plywood, particle board, polyurethane foam, and rigid plastics. This range of substrates allows cabinet shops, fixture manufacturers, and woodworking operations to rely on a single contact adhesive system for many HPL and panel-laminate assemblies. In common HPL applications, SP80 is described as providing a water resistant, non-staining bond, which helps retain the color and finish of decorative laminates while supporting performance in daily-use environments where spills and cleaning are expected. When bonding metals not copper or its alloys to wood-based panels or rigid plastics, the high performance canister contact adhesive formulation supports strong contact bonds once mating surfaces are pressed together. The 140lb canister format ties this material versatility to a production-scale supply of adhesive.
The SP80 low VOC contact adhesive is specified as high solids and high performance, which translates into a high yield per 140lb canister and robust contact bonding on approved substrates. High solids content means more adhesive material is delivered in each pass of the smooth spray pattern, supporting full coverage without excessive passes during production spraying. That smooth spray pattern is described as reducing telegraphing on thin laminates, so installers can bond delicate or thin HPL to plywood, particle board, or rigid plastics while maintaining a flatter, more uniform surface appearance. The resulting water resistant, non-staining bond supports long-term appearance of decorative laminates in common HPL applications, because the adhesive is not described as bleeding or marking through the laminate face. When used on polyurethane foam or rigid plastics within the stated application range, the contact adhesive characteristics help maintain component alignment once contact is made.
Sta'Put SP80 contact adhesive is formulated for decorative laminates, metals not copper or its alloys, plywood, particle board, polyurethane foam, and rigid plastics, so one product covers many typical shop bonding tasks.
The SP80 high solids contact adhesive formulation provides a high yield from the 140lb canister, so installers can complete longer production runs before changing canisters during spraying.
The smooth spray pattern of SP80 reduces telegraphing on thin laminates, helping finished HPL surfaces stay flatter and visually cleaner after laminating to plywood, particle board, or other cores.
The water resistant, non-staining bond of SP80 helps decorative HPL surfaces resist typical moisture exposure and stay free of adhesive-related discoloration in common laminate applications.
The SP80140R 140lb adhesive canister supplies high performance canister contact adhesive in a production-scale volume, supporting continuous spray application on larger runs of panels and laminates.
SP80 is formulated for metals not copper or its alloys, so it can be used when bonding approved metals to decorative laminates, plywood, particle board, or rigid plastics in contact-bond assemblies.
Sta'Put SP80 contact adhesive in the 140lb SP80140R canister format combines high solids, low VOC formulation, and a smooth spray pattern for high performance canister contact adhesive applications on decorative laminates, plywood, particle board, polyurethane foam, rigid plastics, and metals not copper or its alloys. The water resistant, non-staining bond and reduced telegraphing on thin laminates make SP80 well aligned to common HPL applications where finished appearance matters. For shops or installers needing a single contact adhesive that serves multiple approved substrates with a high yield canister supply, SP80 offers a focused way to support laminate and panel bonding workflows.
Sold In: 1 Each
