HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS100W

HandiSCREWS Color Matched Slatwall Screws For Panels

HandiSCREWS Color Matched Slatwall Screws are drywall screws designed for Handi br WALL Slatwall Panels, so they match the system these panels are built around and support a consistent installation approach on wall surfaces. The screws are specified for drywall, which means they are intended to be drilled into drywall where Handi br WALL panels are mounted for storage or organizational layouts. A 1-5/8 inch length provides penetration through the panel and into the drywall substrate, giving the screw enough bite for typical slatwall panel mounting situations. The white color described in the product data creates a color-matched look with white Handi br WALL Slatwall Panels, which matters when the visible screw heads sit in a finished storage area. The product is presented under the HandiSCREWS name with HandiSOLUTIONS branding, aligning fasteners with the rest of the Handi br WALL system.

Key Slatwall Screw Details For Daily Work

• The screws are designed for Handi br WALL Slatwall Panels, so the geometry and intent match the panel system and support repeatable mounting in closet, garage, or storage layouts built around these panels.
• They are described as drywall screws, indicating their role is to be drilled into drywall behind the panels, which matters when the wall surface is standard gypsum board rather than another substrate.
• The head style is flat, which allows the screw head to sit flush with or close to the panel surface, helping the slatwall face remain usable for hooks, shelves, and other panel-mounted components.
• The drive type is Phillips, giving a widely used interface for drivers and bits, so installers can work with common tools already set up in the shop or on site.
• The specified 1-5/8 inch size sets expectations for reach through the panel and into drywall, which is important when planning drilling depth and screw engagement during layout.
• The screws are described as white in the SAP description, so the head color is intended to coordinate with white Handi br WALL Slatwall Panels and keep the hardware visually consistent across a run.

Installation-Focused Details For Drywall Mounting

The product data states that these are drywall screws designed to be drilled into drywall, so their intended installation method is direct driving through Handi br WALL Slatwall Panels into standard drywall substrates. A flat head works with this method by allowing the head to seat at the panel surface, which helps avoid interference where slatwall accessories engage the slots. The Phillips drive type supports straightforward driving with commonly used Phillips bits, which matters when repeating fastening across multiple panels or long runs of slatwall. The 1-5/8 inch length interacts with typical panel thickness and drywall depth, giving installers a defined penetration for each screw location as they fasten panels across studs or drywall fields.

Using HandiSOLUTIONS Slatwall Screws On Projects

Where HandiSCREWS Work In Slatwall Layouts

The product data specifies that these screws are designed for Handi br WALL Slatwall Panels, placing their use specifically in projects that rely on that slatwall system for organization. When a panel from the Handi br WALL line is positioned on drywall, these screws act as the fastening element between the panel and the drywall surface, supporting the panel where storage loads will later be applied through the slats. The drywall designation means their role is tied to walls finished with drywall rather than bare framing, fitting common residential and light commercial interiors where slatwall storage is added after wall finishing. The white description in the SAP text aligns with typical white Handi br WALL panels, so visible heads in the field of the panel blend with the panel face in garage, closet, or utility layouts using that color.

Details That Support Consistent Slatwall Results

The stated 1-5/8 inch size gives a known screw length for installers, which supports consistent bite into drywall behind Handi br WALL Slatwall Panels along a full run. With that defined length, hole spacing and drive depth can stay repeatable from panel to panel, which helps alignment when building continuous storage walls. The flat head detail matters because it interacts with the panel surface, allowing the head to rest at or near flush and reducing projection into the working face of the slatwall. A Phillips drive type is specified, and this widely used interface supports reliable bit engagement across many fastenings as panels are set, which is helpful when panels are large and require numerous screws. Together, the drywall designation, panel-specific design, flat head, Phillips drive, and 1-5/8 inch length form a consistent set of fastening characteristics that align with Handi br WALL Slatwall Panel installations on drywall-backed walls.

Common Questions About HSWS100W Slatwall Screws

Select HandiSCREWS HSWS100W For Slatwall Work

HandiSCREWS Color Matched Slatwall Screws HSWS100W bring together a drywall-specific design, a 1-5/8 inch length, and a flat Phillips head tailored to Handi br WALL Slatwall Panels. For projects using those panels on drywall, this screw configuration aligns with the stated system requirements and supports a consistent installation pattern across each wall run.