
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
HandiSCREWS color matched slatwall screws are designed for Handi br WALL slatwall panels, so they match the system these panels are built around and support a consistent install across a wall run. The screws are specified as Tapcon 1-3/4 inch gray, which means they are made to be drilled into concrete and bite into masonry substrates where these slatwall panels are commonly mounted. Each screw has a 3/16 inch diameter, giving a slim but solid anchor point that minimizes hole size in the panel while still providing strong support in the concrete base. The flat head design sits down into a countersunk hole, helping the slatwall face stay flush for cleaner lines and more predictable engagement with hanging components. A Phillips drive in the head works with widely available bits, helping installers work quickly without changing drivers.
These HandiSOLUTIONS slatwall screws are described as Tapcon 1-3/4 inch gray, so they are drilled into concrete to secure Handi br WALL slatwall panels directly to a masonry surface. Their 3/16 inch size lets installers drill a relatively small pilot into the panel and concrete, which can speed hole drilling and ease driving while still creating a firm mechanical lock in the base material. With a flat head, the screw is suited to a countersunk hole in the slatwall panel, so once driven, the head can sit near flush with the face and reduce interference with stored items. The Phillips drive allows installers to work with standard Phillips bits and drivers, supporting consistent torque and repeatable seating across every screw in a panel layout.
The HandiSCREWS color matched slatwall screws are designed specifically for Handi br WALL slatwall panels, positioning them for use wherever those panels are installed onto concrete. In garage, shop, or storage areas built around this slatwall system, the Tapcon 1-3/4 inch gray specification ties the screw to concrete substrates, so it serves where panels must fasten straight to poured walls or masonry. The 3/16 inch diameter works with slatwall layouts that need repeated fastening along studs or marked lines, allowing neat rows of small, controlled holes through the panel into the base material. Because the head is flat with a Phillips drive, the same screw pattern can run across all panels in a field, supporting a uniform look at every fastener location while using familiar driving tools.
The flat head on these screws supports countersinking into Handi br WALL slatwall panels, so once the screws are driven, the panel face can stay relatively smooth and avoid protruding heads that might conflict with hanging components. The Phillips drive design gives the installer a positive engagement point using a standard bit, which helps apply steady torque, seat the head cleanly into the recess, and reduce cam-out during high-repeat fastening. With a 1-3/4 inch Tapcon length, each screw can extend from the panel into the concrete, improving holding strength so the slatwall field feels rigid under load. The 3/16 inch sizing helps maintain a balance between grip in the concrete and a more modest hole through the panel surface, which can support both structural performance and a cleaner finished appearance across the slatwall installation.
The HandiSCREWS color matched slatwall screws are designed for Handi br WALL slatwall panels, aligning the fastener geometry and use with that specific panel system.
The screws are specified as Tapcon 1-3/4 inch gray and are designed to be drilled into concrete, so they fasten Handi br WALL slatwall panels directly to masonry surfaces.
Each screw is 3/16 inch by 1-3/4 inch, providing a slim hole through the panel and sufficient length to bite into the concrete substrate for panel support.
The flat head is suited to a countersunk hole in the slatwall panel, allowing the head to sit near flush so the panel face stays smoother for hanging components.
The screws use a Phillips drive, which works with common Phillips bits and drivers, supporting straightforward driving and repeatable seating across a slatwall installation.
HSWS300GTC is the HandiSOLUTIONS manufacturer part number for these HandiSCREWS Tapcon 1-3/4 inch gray slatwall screws, identifying this exact size and style.
The HandiSCREWS color matched slatwall screws from HandiSOLUTIONS give installers a defined fastener for Handi br WALL slatwall panels when those panels must anchor into concrete. With a 3/16 inch by 1-3/4 inch Tapcon format, a flat head, and a Phillips drive, they are configured around drilling into concrete while supporting a flush, usable slatwall face. For projects built on this panel system where a concrete substrate is present, choosing this HSWS300GTC screw specification aligns the fastener with the panel and base material so layout and driving stay consistent from panel to panel.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each | GCHSWS325G Mfr# HSWS325G | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS325G | ||||
Sold in: 1000 Each | GCHSWS300G Mfr# HSWS300G | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS300G | ||||
Sold in: 1000 Each | GCHSWS225T Mfr# HSWS225T | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS225T | ||||
Sold in: 1000 Each | GCHSWS200TTC Mfr# HSWS200TTC | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS200TTC | ||||
Sold in: 1000 Each | GCHSWS200T Mfr# HSWS200T | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS200T | ||||
Sold in: 1000 Each | GCHSWS125W Mfr# HSWS125W | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS125W | ||||
Sold in: 1000 Each | GCHSWS100WTC Mfr# HSWS100WTC | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS100WTC | ||||
Sold in: 1000 Each | GCHSWS100W Mfr# HSWS100W | HandiSCREWS Color Matched Slatwall Screws - Handisolutions HSWS100W |