
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
400mm 90 degree corner bracket describes this Bainbridge Manufacturing H-313-002-BR shelf bracket that is used to attach 3/4 inch shelving at a 90 degree corner of a closet. The 400mm (16 inch) length spans typical closet corner runs so a single piece supports the joint where two shelves meet. Its 90 degree form ties the intersecting shelves together at the corner, which stabilizes the layout and helps the shelving carry everyday closet loads without relying only on wall fasteners at the very end of each board. The bracket is made of heavy duty plastic, so it delivers a rigid bearing surface under the shelf while resisting impact during normal use. The brown color coordinates with many standard closet and garage organization finishes, which helps the support visually blend into darker shelving layouts once installed along the corner.
This Bainbridge Manufacturing H-313-002-BR corner bracket is available in 14 inch and 16 inch lengths and is easy to cut to size, which streamlines layout when working inside existing closets or custom bays. The 400mm (16 inch) option gives extra length to trim, so the installer can align the bracket precisely with shelf overhangs and wall conditions before fastening. Because it is designed to be used with 3/4 inch shelving at a 90 degree corner, the geometry lines up with standard board thickness, which helps keep the top surfaces of intersecting shelves level. Its heavy duty plastic construction handles being cut without splintering like some brittle materials, which supports clean ends and straight lines at the corner.
The Bainbridge Manufacturing H-313-002-BR bracket is used to attach 3/4 inch shelving at a 90 degree corner of a closet, so it fits directly into typical closet, shelf, and garage organization layouts that use 3/4 inch board stock. The 400mm (16 inch) length is sized for standard closet spans, allowing the piece to sit beneath both intersecting shelves where they turn the corner. Because it is available in 14 inch and 16 inch lengths, the installer can select the run that most closely matches the planned shelf depth, then cut to size where needed. The brown finish, described as part of a brown 400mm 90 degree corner bracket, visually suits darker melamine or laminate shelving, so the bracket supports the corner without drawing attention along the underside of the joint.
The bracket is made of heavy duty plastic, which provides solid bearing under the shelves while tolerating contact in busy closet spaces, so the support keeps its shape under day-to-day use. This material also cuts cleanly when installers shorten the 14 inch or 16 inch lengths, which helps maintain a straight, tight edge where the bracket meets the wall or shelf front. The 400mm (16 inch) length listed in the SAP description provides extra reach beneath the shelves, so the load at the corner is shared along more of the board instead of being concentrated at a small clip. Because the piece is specifically used at a 90 degree corner of a closet with 3/4 inch shelving, its form encourages square alignment of the two shelf sections, which supports accurate layout and reduces rework if multiple shelves stack on the same wall.
The H-313-002-BR bracket is used to attach 3/4 inch shelving at a 90 degree closet corner, so it is sized around that common board thickness in closet and garage organization projects.
The Bainbridge Manufacturing bracket has a 400mm (16 inch) length, giving extended support under the corner joint where two shelves meet in a closet layout.
The corner bracket is available in 14 inch and 16 inch lengths and is described as easy to cut to size, so installers can trim it to match custom shelf depths.
This bracket is used to attach 3/4 inch shelving at a 90 degree corner of a closet, placing it at inside corners where two shelf runs intersect.
The H-313-002-BR corner bracket is made of heavy duty plastic, giving a rigid, impact-tolerant support surface for typical closet and shelving environments.
The brown color, noted in the 400mm 90 degree corner bracket brown description, allows the support to blend with dark-toned shelving systems along the closet corner.
The Bainbridge Manufacturing H-313-002-BR 400mm (16 inch) 90 degree corner bracket brown is used to attach 3/4 inch shelving at a 90 degree closet corner, giving solid heavy duty plastic support right where two runs intersect. The availability of 14 inch and 16 inch lengths that are easy to cut to size helps align the bracket with real-world closet depths and layouts. For projects calling for a brown corner support that visually matches darker shelving while reinforcing the joint, this bracket offers a straightforward solution for organizing closet and garage shelving runs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | PLH-080-002WH Mfr# H-313-002-WH | Bainbridge 90Deg corner brackets H-313-002-WH | ||||
Sold in: 1 Each | PLH-080-002CCAL Mfr# H-313-002-CCAL | 400MM 16 90 degree corner bracket almond | ||||
Sold in: 1 Each | PLH-080-002BK Mfr# H-313-002-BK | 90Deg corner brackets 400MM black H-313-002-BK | ||||
Sold in: 1 Each | PLH-080-001WH Mfr# H-313-001-WH | 90Deg corner brackets Bainbridge H-313-001-WH | ||||
Sold in: 1 Each | PLH-080-001CCAL Mfr# H-313-001-CCAL | Bainbridge 90Deg Corner Brackets 351MM Almond | ||||
Sold in: 1 Each | PLH-080-001BR Mfr# H-313-001-BR | 90Deg corner brackets brown 351MM H-313-001-BR | ||||
Sold in: 1 Each | PLH-080-001BK Mfr# H-313-001-BK | 90Deg corner brackets 14 inch black |