Festool Domino beech tenons are pre-cut solid wood connectors sized at 40mm x 20mm x 6mm, so each piece fits a matching Domino mortise and creates a consistent joint profile across your interior projects. The beech material is intended for interior applications, giving cabinetmakers and shop teams a wood-to-wood solution that matches typical casework materials and finishes in indoor environments. These tenons are designed for use with Domino DF 500 Joiners, which means every 6x20x40mm mortise the DF 500 cuts will match the tenon geometry and support repeatable alignment. The product is classified under biscuits, tying it directly into common dowel and biscuit workflows while providing a loose tenon approach that suits frame, panel, and similar interior assemblies. The dedicated Festool part number 493297 allows straightforward reordering whenever the same size and specification are required again.
Domino 40mm x 20mm x 6mm tenons are dimensioned to match mortises produced by Domino DF 500 Joiners, so once the joiner is set to the 6x20x40mm pattern, these beech pieces slide into the cut without hand fitting. That sizing relationship saves time during assembly because the cutter and tenon are aligned by design rather than by trial and error. The interior-focused beech material pairs with typical cabinet and furniture stock, so joints created with these tenons can be machined, sanded, and finished alongside surrounding parts without changing methods. With the biscuits product classification, installers familiar with loose tenon or biscuit work can slot these Domino pieces into similar layouts whenever a 40mm x 20mm x 6mm interior joint is specified.
Domino DF 500 joiner tenons in the 40mm x 20mm x 6mm size are intended for interior applications, so they align well with indoor furniture, cabinetry, and built-ins that benefit from hidden wood-to-wood connections. The beech construction provides a hardwood connector that behaves like the surrounding stock during machining and finishing, which helps doors, frames, and panels track together through sanding and coating steps. Because these pieces are engineered for use with Domino DF 500 Joiners, every mortise cut to the 6x20x40mm setting positions the tenon consistently relative to edges and faces, aiding layout on rails, stiles, and partitions. The biscuits product class context places these tenons in the same family as other loose-joint solutions, so shops already comfortable slotting and gluing biscuits can adapt the Domino pattern to similar interior assemblies without changing their overall process.
Domino interior beech tenons at 40mm x 20mm x 6mm establish a fixed joint footprint, which helps designers and builders plan rail widths, panel layouts, and joint spacing with confidence that the connector will match the DF 500 mortise. The thickness and width coordinate with the joiner settings, so a single cutter choice handles repeated joints across a run of cabinets or furniture components, reducing adjustments between parts. Having a defined interior-oriented beech version, identified by Festool number 493297, lets project specs call out this exact size when a particular joint capacity or layout is needed. Because these tenons are integrated into the Domino DF 500 system, installers can rely on tool guides and fences to position the 6x20x40mm mortises, leading to aligned faces and controlled glue lines that are important when joints must stay flush through finishing.
Domino beech tenons are intended for interior applications, so they suit indoor cabinetry, furniture, and similar woodwork where wood-to-wood joints are required inside controlled environments.
These tenons are for use with Domino DF 500 Joiners, so the 40mm x 20mm x 6mm size matches mortises cut with the DF 500 set to this format.
Each Domino tenon is 40mm x 20mm x 6mm, giving a defined joint footprint that matches the 6x20x40mm mortise produced by the Domino DF 500 Joiner.
The beech material is intended for interior applications, aligning these tenons with indoor projects where the connector should perform like typical interior hardwood components.
Manufacturer part number 493297 uniquely identifies these 6x20x40mm beech Domino tenons, so project specs and reorders can call out the exact joint size needed.
These pieces are classified as biscuits, so they function as loose connectors in machined slots, similar to traditional biscuits but matched to the Domino DF 500 system.
Festool Domino DF 500 beech tenons in the 40mm x 20mm x 6mm size give shops and installers a defined, interior-focused connector that matches the DF 500 cut pattern. Selecting part number 493297 aligns joints, tooling, and drawings around one consistent Domino standard.
Sold In: 1 Package