Domino 30mm x 19mm x 5mm Beech Tenon for DF 500 Q, Pack of 300

Domino Beech Tenon 5x19x30mm For DF 500

Domino Beech Tenon 5x19x30mm describes a Festool beech tenon sized 5mm x 19mm x 30mm, so each loose tenon fits a matching Domino mortise and creates a consistent joint profile for repeatable interior carcasses, frames, and panel assemblies. The tenons are specified for use with Domino DF 500 Joiners, which means the geometry matches DF 500 cutters and fence setups, helping installers move from layout to joinery without dimension guessing on the job. The Festool beech material is intended for interior applications, so it suits typical cabinet, furniture, and built-in work where joints are protected from exterior exposure. The part is identified as Domino 30mm x 19mm x 5mm Beech Tenon for DF 500 Q, Pack of 300, which establishes a clear product reference when planning projects or standardizing across multiple installers.

Key Domino Tenon Details For Interior Work

• The 5mm thickness works with DF 500 Joiners, so mortise width and plunge settings stay aligned with the machine, supporting efficient repeat drilling during cabinet or furniture production.
• The 19mm height defines the mortise height, which helps maintain predictable glue surface and joint registration across rails, stiles, and dividers in interior assemblies.
• The 30mm length sets how far the tenon reaches into both parts, so installers can balance strength with stock thickness when planning interior frames and casework.
• Beech tenons are intended for interior applications, meaning the material selection matches typical shop and on-site environments for built-ins, shelves, and interior doors.
• The Domino tenon design belongs to the Biscuits product class, giving woodworkers a familiar loose-joinery approach that integrates into fast assembly workflows.

Festool Domino Beech Tenon Fit And Setup

This Domino tenon is specified for DF 500 Joiners, so the 5mm x 19mm x 30mm dimensions match the machine cutters and fences, allowing installers to work directly from the label to the mortise settings. Because the beech tenons are intended for interior applications, users can align their joinery choices with typical cabinet carcasses, face frames, and interior furniture without changing joinery type between stations. Being part of the Fasteners category under Dowels & Biscuits means these tenons function as structural joinery elements in the assembly sequence, tying panels and components together at the mortising stage. The clear Festool branding and manufacturer part number 494938 provide an exact reference when documenting build specs or reordering for consistent workflow.

Using Domino DF 500 Beech Tenons In Projects

Where Domino Beech Tenon 5x19x30mm Performs Best

This Festool Domino beech tenon at 5mm x 19mm x 30mm fits work where DF 500 Joiners are already in use, so shop and field teams can rely on the same joinery layout tools from rough cutting through final assembly. As a beech tenon intended for interior applications, it suits cabinet carcasses, closet systems, and interior furniture that live in controlled environments, matching the joinery approach to common woodworking conditions. The Fasteners classification, specifically Dowels & Biscuits, places this part as a structural connector during assembly, so mortised joints can replace or supplement traditional dowel or biscuit layouts in interior builds. Because the product name explicitly calls out Domino 30mm x 19mm x 5mm Beech Tenon for DF 500 Q, Pack of 300, planners can document that exact format when drafting cut lists, estimating material, or aligning shop standards. The tenon geometry works with Domino mortises created by DF 500 tools, which means installers can sequence mortising, dry-fit, and glue-up steps using established fence and depth settings.

Why These Tenon Details Support Repeatable Results

The defined 5mm thickness gives a consistent tongue size for DF 500 Joiners, so joints line up predictably when referencing off cabinet edges or face-frame fronts during production runs. The 19mm tenon height fixes the mortise profile, helping maintain alignment across panel edges and frame members where identical setups must repeat over many parts. With a 30mm length, the tenon offers a specific embed depth into each component, allowing woodworkers to design joints around typical interior stock without rethinking every connection. Being beech and intended for interior applications, the material choice matches indoor cabinetry, office fixtures, and residential furniture, keeping joinery type consistent across similar environments. Located in the Fasteners category as a Biscuits product, this Domino tenon fits into existing loose-joinery workflows, so teams already familiar with biscuits or dowels can adapt to this format while retaining a clear part reference in Festool number 494938.

Common Questions About Festool Domino Beech Tenons

Select Domino Beech Tenons For Interior Joinery

Choosing this Festool Domino 5mm x 19mm x 30mm beech tenon aligns DF 500 Joiners with a clearly defined interior joinery standard, so cabinet shops and installers can plan mortises, glue-ups, and repeat builds around a known part number. The interior beech specification and precise Domino dimensions support predictable fits in carcasses, frames, and panel assemblies. Use this Festool 494938 reference wherever consistent Domino-based interior joints are part of the workflow.