NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR1130SMB1OUF1 to RSR1130SMB1OUF1.

Omega National 30 Inch Red Oak Range Hood Use

Omega National 30" red oak range hood is a wall mount wood range hood built for kitchens using a 30 inch wide cooking surface. The hood is part of Omega National's Omega Range Hoods value line, so it delivers their wood hood design in a cost-conscious configuration. It is produced using top quality hardwoods with "A" grade veneers, which gives installers a consistent wood surface for finishing and a stable structure for mounting against cabinetry. The hood is available in a 30 inch width, allowing it to align with standard 30 inch wall cabinet layouts often used above ranges. It is made in red oak, one of five unfinished wood species in this series, so shops can stain or finish it to coordinate with surrounding red oak cabinetry or trim in the same project.

Key Range Hood Details That Support Your Work

• The Omega Range Hoods value line design provides a cost-focused wood hood option while still using top quality hardwoods, helping projects hit budget targets without moving away from a wood canopy look.
• Construction with "A" grade veneers creates a smooth, consistent face surface, which streamlines sanding and finishing workflows and supports an even appearance across the visible hood areas.
• The 30 inch width matches common 30 inch wall cabinet and range sizes, allowing the hood to visually register with adjacent cabinets and cooking appliances for a clean, planned layout.
• Red oak as one of the available unfinished wood species offers a familiar grain and tone that can be stained or finished in line with other red oak components used throughout a kitchen installation.
• The hood is sold in each quantities, so ordering aligns directly with individual kitchen layouts or replacement situations without splitting larger case counts.

Wall Mount Hood And Liner Installation Context

This Omega National wood range hood is designed for wall mounting above a cooking area, giving cabinet installers a defined wood canopy location in the run of wall cabinets. The hood arrives unfinished in red oak, so finishing work is performed as part of the cabinet finishing process, allowing color and sheen to match surrounding red oak cabinetry. The hood comes with a silver metallic color metal liner, which creates the metal interface for the selected ventilator and helps define the working interior of the hood cavity. The liner is designed to accept Broan ventilator models NPRHVBB20SM at 390 CFM and NPRHVBF10SM at 250 CFM, so installers can select one of these Broan units knowing the liner is built specifically around those models.

How This Omega Wood Hood Works In Kitchens

Wall Mount Red Oak Hood In Kitchen Layouts

This Omega Series wall mount range hood fits into kitchen wall cabinet runs that use a 30 inch wide opening above the range. The red oak unfinished construction integrates with other wood components in the project, so designers can carry a red oak theme through the hood area. Because Omega Range Hoods are Omega National's value line, they provide a wood canopy solution for projects targeting a controlled cost level. The "A" grade veneers on the exterior surfaces help finished installations present a uniform face, which benefits kitchens where the hood is a focal point between upper cabinets. The hood sits in the wood range hoods category, so it supports projects that call for a wood statement above the cooking zone rather than a metal-only housing.

Broan Compatible Liner For Focused Vent Setup

The silver metallic color metal liner supplied with this hood is designed to accept specific Broan ventilator models NPRHVBB20SM at 390 CFM and NPRHVBF10SM at 250 CFM. This design focus gives installers a clear pairing between the wood hood and compatible Broan ventilator options. Matching the liner to these Broan models means mounting points and interior shaping are oriented to those ventilators, which supports a more direct installation sequence once the ventilator model is chosen. The liner also establishes a defined metal interior surface within the wood hood shell, so the working ventilation area is concentrated around a known Broan configuration, simplifying planning for duct and power routing in the cabinet run.

Common Questions About This Omega Range Hood

Choose This Hood For Broan Focused Wood Installs

The Omega National 30" red oak Omega Series wall mount hood pairs a wood canopy look with a liner designed for Broan NPRHVBB20SM and NPRHVBF10SM ventilators. For projects using a 30 inch cooking area and red oak cabinetry, this hood creates a coordinated focal point above the range while fitting into a value line budget. Select this model when a wood range hood with defined Broan ventilator compatibility supports the planned kitchen layout and finish schedule.