Chamfer Router Bit For Clean Bevel Edges

Chamfer Router Bit from Amana Tool is a 1-3/8 inch diameter, 2-flute router bit designed to chamfer or bevel edges, so it shapes workpiece edges for decorative or joinery use. The 30 degree angle keeps the chamfer consistent, which supports accurate layout when you want matching bevels around a project. A 13/16 inch cutting height lets this bit handle a range of stock thicknesses, so one setup can serve multiple edge profiles on similar materials. The 1/2 inch shank provides a solid grip in routers designed for that collet size, which supports smoother cutting when forming long chamfers. Overall length of 2-3/4 inches keeps the bit compact in the router, which helps maintain control during edge passes. The bit forms edges that can be used to make 4-, 6-, 8-, 12-, or 16-sided boxes, so it supports multi-sided projects where miters need to meet cleanly.

Key Edgeforming Details That Support Your Work

• The 30 degree angle produces repeatable bevels, so matching workpieces align more predictably when assembling multi-sided boxes or decorative edge runs.
• The 1-3/8 inch diameter contacts a broad area of the edge, which helps create crisp, uniform chamfers along the full length of the cut.
• The 2-flute design cuts with two edges, so the bit can leave a smoother surface that reduces follow-up sanding on most edgeforming passes.
• The 13/16 inch cutting height covers common edge depths, allowing the same setup to handle different profile sizes on similar material thicknesses.
• The 1/2 inch shank seats firmly in compatible routers, which supports stable rotation and helps maintain a consistent cut line along the workpiece.

Router Table Use And Chamfer Setup Details

The bit is described for best results in a router table, so it is intended to run with the workpiece guided against a fence for controlled chamfering. Using a router table keeps the 30 degree cutting angle fixed relative to the table surface, which helps you repeat the same bevel on multiple parts without re-measuring. The 2-3/4 inch overall length keeps the cutting portion close to the collet, so the bit stays compact above the table during passes. With a 13/16 inch cutting height, the bit can be raised or lowered to adjust how much of the edge is beveled, which lets you tune the visual width of the chamfer while staying within the cutting range. The 1/2 inch shank size fits 1/2 inch router collets, which supports a solid hold during table-mounted use.

Using This Chamfer Router Bit In Real Projects

Where This Edgeforming Router Bit Performs Best

This Amana Tool router bit is specified for chamfer or bevel edges for decorative effect, so it fits projects where visual edge breaks are part of the design, such as furniture parts or trim details. The same 30 degree geometry is also meant to form edge miter joints, which makes the bit suitable when you want beveled edges that meet at a defined angle for joinery. Because it produces crisp, uniform edges at accurate angles, it supports projects where multiple parts must register cleanly, such as casework components that meet along chamfered corners. The fact that it can make 4-, 6-, 8-, 12-, or 16-sided boxes shows it is suited to multi-sided assemblies, where every segment needs an accurate bevel to close the shape. A 1-3/8 inch diameter paired with 13/16 inch cutting height lets the bit handle common box and panel edges, so it connects well with typical cabinet and woodworking dimensions.

Why These Router Bit Details Support Consistent Results

The 30 degree angle works with the described box counts because the bevels combine to close shapes like 4-, 6-, 8-, 12-, or 16-sided boxes, so each edge can be cut once and then assembled without re-trimming the angle. Producing crisp, uniform edges at accurate angles means each pass should match the previous one, which reduces variation between parts when you cut a full set of sides for a box or case. The 2-flute configuration engages the material on both sides of the rotation, so cutting forces are balanced around the bit, which can help maintain a straighter feed path along fences. With a 13/16 inch cutting height, you can run shallow or deeper chamfers by adjusting height within the same capacity, which supports experimenting with edge size while keeping the same bit in the router. The 1/2 inch shank transmits torque from routers designed for that collet size, which supports steady cutting when working at typical chamfering feed rates.

Common Questions About This Chamfer Router Bit

Select This Chamfer Router Bit For Precise Edgeforming

The Amana Tool 1-3/8 inch x 2-3/4 inch Chamfer Router Bit uses a 30 degree, 2-flute design to create chamfered or beveled edges that can serve as decorative details or edge miter joints. With a 13/16 inch cutting height and 1/2 inch shank, it supports router table setups where accurate, repeatable angles are important for projects like 4-, 6-, 8-, 12-, or 16-sided boxes. Choose this router bit when you need a defined chamfer profile that ties directly to clean, uniform edge geometry on multi-part assemblies.