
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Chamfer Router Bit 1-1/4 x 2-3/8 describes an Amana Tool router bit sized to cut a 1-1/4 inch wide chamfer with a 2-3/8 inch overall cutting length, giving cabinetmakers and woodworkers coverage for substantial edge work in a single pass. The bit uses a 1/2 inch shank, so it fits routers set up for 1/2 inch tooling and benefits from the stability that shank size provides during heavier cuts. A 45 degree chamfer angle is built into the profile, so every pass shapes a consistent bevel that aligns with common miter geometry. The 2-flute cutting design manages the cut with two edges, balancing stock removal with surface quality. This chamfer router bit is built to chamfer or bevel edges for decorative effect, so straight workpieces gain a defined transition instead of a square edge. It is also specified to form edge miter joints, giving the bit a direct role in joinery as well as shaping.
The Web Description specifies that for best results this chamfer router bit should be used in a router table, so the workpiece can be guided over a fixed cutter instead of handling the router by hand. A table setup stabilizes the 1-1/4 inch wide chamfer cut, supporting consistent contact along long stock. The 1/2 inch shank suits router table motors configured for that collet size, aligning the tool with typical cabinet shop equipment. Because the bit is designed for chamfer or bevel edges, a fence or bearing-guided setup can be arranged to register the cut at the same reveal on repeat parts. The 45 degree geometry, combined with steady router table support, helps keep miter faces uniformly angled from piece to piece.
This Amana Tool chamfer router bit is identified for chamfer or bevel edges for decorative effect, so it fits well into edgeforming tasks on cabinet components, furniture parts, and trim. By producing crisp, uniform edges at accurate angles, it serves jobs where visual consistency along an entire run is important. The bit is also specified to make 4-, 6-, 8-, 12-, or 16-sided boxes, so projects involving multi-sided cases, display pieces, or small containers benefit from its 45 degree profile. In those applications, each beveled edge can contribute to a precise polygon layout, helping the sides close neatly around the shape. The 2-flute, 1/2 inch shank design supports this work on a router table, where fixed positioning of the bit lets you pass each side against the cutter for a consistent chamfer depth.
The router bit is described as a CHAMFER,45 DEG ,1/2' SHANK and as a chamfer or bevel edge tool, so its 45 degree cutting face is central to its role in forming edge miter joints. When two 45 degree edges meet, they form a 90 degree corner, which is standard for 4-sided boxes and many case assemblies. The description extends this to 4-, 6-, 8-, 12-, or 16-sided boxes, so repeated 45 degree chamfers can be arranged so the resulting polygon closes around a regular shape. Producing crisp, uniform edges at accurate angles limits gaps along these joints, supporting both appearance and glue contact. Because the bit is recommended for best results in a router table, you can set a fixed height and fence position and run each piece the same way, reinforcing angle repeatability from side to side.
This chamfer router bit chamfers or bevels edges for decorative effect or to form edge miter joints, so it handles both visual edge treatment and preparation of angled glue faces.
The 45 degree cutting angle produces crisp, uniform edges at accurate angles, which supports tight edge miter joints and helps multi-sided boxes close cleanly around their layout.
The bit is specified to make 4-, 6-, 8-, 12-, or 16-sided boxes, so its 45 degree chamfer profile aligns the edge angles needed for those regular polygon assemblies.
The router bit uses a 1/2 inch shank, which suits routers and router tables equipped for 1/2 inch tooling and supports stable running on wider chamfer cuts.
The Web Description notes best results in a router table, because a fixed bit with guided stock movement supports consistent chamfer width and angle on longer or multiple workpieces.
The 2-flute configuration provides two cutting edges, so material removal and surface finish are balanced during chamfering along edges and miter joints.
The Amana Tool 1-1/4 inch x 2-3/8 inch chamfer router bit with 1/2 inch shank is described specifically for chamfer or bevel edges and forming edge miter joints, so it aligns directly with angled edgeforming tasks. Its 45 degree profile supports crisp, uniform edges at accurate angles when building 4-, 6-, 8-, 12-, or 16-sided boxes. Using it in a router table, as recommended for best results, brings stable handling to those wider chamfers. For projects that combine decorative bevels with structural mitered corners, this 2-flute chamfer router bit keeps shaping and joint preparation on one tool.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA47704 Mfr# 47704 | 1/8" x 3/8" Steel Ball Bearing Guide |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA49404 Mfr# 49404 | Edge Forming Chamfer Carbide Tip Bit 49404 | ||||
Sold in: 1 Each | AA49400 Mfr# 49400 | 1-1/4" x 2" Chamfer Router Bit, 2-Flute, 1/4" Shank | ||||
Sold in: 1 Each | AA49406 Mfr# 49406 | 2-3/8" x 2-7/8" Chamfer Router Bit, 2-Flute, 1/2" Shank | ||||
Sold in: 1 Each | AA49408 Mfr# 49408 | Chamfer Router Bit 7/8 x 2-1/4, 1/4 Shank | ||||
Sold in: 1 Each | AA49410 Mfr# 49410 | Chamfer Router Bit 22.5 Degree 1/2 Inch Shank | ||||
Sold in: 1 Each | AA49414 Mfr# 49414 | Chamfer Router Bit 1-3/8 x 2-3/4 30 Degree |
Sold In: 1 Each