Carbide Tipped Table Edge Router Bit 49550

Table Edge Router Bit For Handrail And Tops

Table edge router bit from Amana Tool is a carbide tipped edge forming router bit designed for cutting table top edges or working with handrail side profile bits. The carbide tipped construction handles repeated routing on wood edges where consistent profiles are needed. The bit is classified as a standard hand and table edge router bit, so it serves both decorative table edges and handrail-related work with the same profile. With a manufacturer part number 49550, the bit can be matched precisely across jobs or replacements. The router bit belongs to the edgeforming class of router bits, meaning it shapes the final contour of an exposed edge in one pass. As part of the bits, blades and cutters category, it fits straight into a routing workflow for woodworking shops focusing on finished edges.

Edgeforming Details That Support Clean Results

• The carbide tipped cutting edges are built for edgeforming, so they maintain the handrail or table edge profile across multiple pieces, which supports uniform visual lines around a run of tops.
• The bit cuts table top edges or works with handrail side profile bits, letting a shop use one profile for multiple edge tasks, which simplifies setup when moving between tops and rail sections.
• The 2-3/4 inch diameter (D) creates a broad cutting sweep, so the router bit forms a substantial edge shape in a single profile, which helps produce a clear, defined table or handrail edge.
• The 1-3/4 inch radius (R) sets the curvature of the profile, giving a large rounded contour, which is useful when a project calls for a generous hand-feel or a soft edge transition.
• The cutting height (B) of 5/8 inch defines how tall the profile cut is along the edge, which helps a builder understand how much of the edge will show the routed detail on the finished piece.

Router Bit Shank And Length For Setup

The 1/2 inch shank (d) on this handrail and table edge router bit fits routers and collets designed for a 1/2 inch interface, which gives a solid grip in heavy edgeforming passes. An overall length (L) of 2-7/8 inch provides enough reach for typical table and handrail edge passes while still keeping the bit compact for controlled routing. The classification under router bits means it installs in standard router setups, keeping it aligned with common woodworking equipment. Being an edgeforming router bit, it is used after stock is dimensioned, so the shop can focus on final edge appearance during the routing step.

Using This Handrail Table Edge Bit In Practice

Where This Carbide Edge Forming Bit Fits

This carbide tipped handrail and table edge router bit is designed for use when cutting table top edges or when paired with handrail side profile bits. In a woodworking shop focused on furniture or rail systems, this single profile can cover multiple edge roles, from table tops to rail components. The 2-3/4 inch diameter works on edges where a substantial molded profile is needed, such as thicker tops or prominent handrails. The 1-3/4 inch radius gives a large curved edge suitable for areas that are frequently handled, so the edge profile contributes to comfort on rails and smooth transitions on table edges. Because the cutting height is 5/8 inch, it focuses the detail close to the face of the panel or rail, which helps maintain a clean line where the routed section meets the flat surface.

Why The Dimensions Matter For Repeatable Profiles

The diameter (D) of 2-3/4 inch and radius (R) of 1-3/4 inch define the exact edge contour, so once a shop commits to this bit, they can repeat the same handrail or table edge look across future projects. The 1/2 inch shank helps stabilize the bit during heavier passes along hardwood or thicker stock, which supports smoother cuts and reduces chatter on visible edges. With a 5/8 inch cutting height (B), the bit keeps the shaped area focused, which makes it easier to align the profile relative to the thickness of the table or rail. The overall length (L) of 2-7/8 inch balances reach and control, allowing the bit to form the full profile without excessive projection from the collet. Identifying it by manufacturer part number 49550 allows shops to reorder the same profile, preserving visual continuity in replacements or extensions.

Common Questions About This Table Edge Router Bit

Select This Bit For Consistent Table And Rail Edges

This Amana Tool handrail and table edge router bit brings a defined 2-3/4 inch diameter, 1-3/4 inch radius profile to table tops and handrail work, so a shop can repeat the same edge style across projects. With a 1/2 inch shank and 2-7/8 inch overall length, it fits standard router setups that use 1/2 inch bits, supporting controlled passes on finished edges. Using manufacturer part number 49550 helps match this exact carbide tipped profile whenever additional bits are needed for ongoing or repeat jobs.