
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Classical table edge router bit shapes table top edges with a defined classical profile, giving projects a consistent finished look on every pass. The Amana Tool bit is carbide tipped, so the cutting edges resist wear as they form decorative edges in repeated routing work. The edgeforming design keeps the focus on building a shaped table perimeter rather than removing bulk stock. A 2-1/2 inch diameter cutting profile engages a broad section of the edge, which helps create a smooth, flowing table edge in fewer passes along the workpiece. The bit uses a 2-flute layout, so there are two cutting edges sharing the cut, which supports a smoother cut line and balanced operation at the router. With this profile, the bit serves cabinet and woodworking shops that need repeatable table top edges.
The 1/2 inch shank size fits routers designed for 1/2 inch shank tooling, which supports a solid grip in the collet for stable edgeforming passes along table tops. A cutting height of 25/32 inch defines the vertical span of the profile, so the operator can match the bit exposure to the thickness of the table edge during setup. The overall length of 2-3/4 inch sets how far the bit extends from the collet, which affects how the router or table fence is positioned when running workpieces. The radius of 13/32 inch shapes the main curve of the classical edge, while the additional radii and step dimensions (R1 13/64 inch, B1 43/64 inch, B2 7/64 inch) define the finer shoulders and fillets, giving the final edge a detailed, built-up profile.
This Amana Tool router bit is identified as a table edge classical profile, so it is aimed at cutting edges on table tops where a shaped perimeter is part of the design. The bit sits within the edgeforming product class, placing it in the group of tools dedicated to shaping decorative profiles rather than straight trimming, which directs its role to final edge passes on finished stock. The web description specifies it is used for cutting table top edges or used with handrail side profile bits, so it serves both standalone table projects and coordinated railing work. In practice, that means one profile can carry through from tables to handrails when used with appropriate side profiles, helping a shop maintain a unified style across multiple components in a room.
The 2-1/2 inch diameter (D) determines how deeply the profile reaches across the table edge, which gives a consistent reveal when the fence and bit height are set to the same reference points from job to job. The cutting height (B) of 25/32 inch limits the vertical area the bit shapes, so once the bit height is dialed in, the same setup reproduces the classical form across multiple tops. Dimensions B1 at 43/64 inch and B2 at 7/64 inch locate smaller steps in the pattern, which helps an operator align the profile relative to the top or bottom face when laying out the cut. The radius R at 13/32 inch and the secondary radius R1 at 13/64 inch define the curves within the edge, providing clear geometric references for matching drawings or existing pieces. The manufacturer part number 49556 ties these dimensions to a specific profile, which matters when a shop repeats an established design or needs to order the same geometry again.
The Amana Tool 49556 is a carbide tipped classical table edge router bit classified as an edgeforming router bit, so it is intended for shaping decorative table top edge profiles.
The router bit uses a 1/2 inch shank, so it is suited to routers that accept 1/2 inch shank tooling for a solid grip during edgeforming work on table tops.
The 49556 router bit has a 2-1/2 inch diameter, allowing the profile to reach well across the table edge and form the full classical shape in a controlled pass.
The bit provides a cutting height of 25/32 inch, defining the vertical span of the classical profile so setups can match the table edge thickness accurately.
The Amana Tool table edge router bit has 2 flutes, giving two cutting edges that share the load and support smoother cuts on table edges.
The 49556 router bit is described for cutting table top edges or for use with handrail side profile bits, supporting coordinated classical profiles in woodworking projects.
The Amana Tool carbide tipped classical table edge router bit with 1/2 inch shank, 2-1/2 inch diameter, and defined radii provides a repeatable way to form detailed table edges. With dimensions documented under part number 49556, shops can match existing work or standardize on a single edge profile. For woodworking operations that routinely shape table tops or coordinate edges with handrail side profiles, selecting this edgeforming router bit brings a known geometry into the routing workflow.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA47706 Mfr# 47706 | 3/16" x 1/2" Steel Ball Bearing Guide |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA49554 Mfr# 49554 | Table edge ogee router bit 3/8 radius 1/2 shank | ||||
Sold in: 1 Each | AA49550 Mfr# 49550 | Carbide Tipped Table Edge Router Bit 49550 |