Table edge ogee router bit 3/8 radius 1/2 shank

Table Edge Ogee Router Bit For Profiled Edges

table edge ogee router bit from Amana Tool is designed as a carbide tipped table edge ogee profile, so it cuts a decorative shaped edge on table tops and similar workpieces. The 3/8 inch radius forms the curved portion of the ogee, which defines how soft or tight the edge profile appears on the finished top. The 2-1/2 inch diameter body provides a wide cutting circle, which helps sweep a full table edge profile in one smooth pass. A cutting height of 3/4 inch lets the bit shape a substantial edge band, giving room to run the detail across standard top thicknesses. This router bit is listed for use as an ogee hand or table edge router bit, so it works for shaping tops held on a router table or guided by hand where appropriate. The 1/2 inch shank matches routers that accept this shank size, supporting stable mounting in common professional tools.

Key Table Edge Ogee Details For Daily Work

• The carbide tipped construction is specified for this Amana Tool bit, which means the cutting edges are made from carbide so the profile stays sharp longer across repeated table edge routing in wood shop conditions.
• The 3/8 inch radius is clearly defined in the specifications, which sets the curvature of the ogee and helps match this profile when repeating an existing design or coordinating with handrail side profile router bits.
• The 2-1/2 inch diameter is noted as the cutting diameter, so the bit reaches across a wide edge area and allows full-profile cuts on table edges in fewer passes when conditions and setups support it.
• The cutting height of 3/4 inch is listed as the B dimension, giving enough vertical reach to shape a deep edge detail along table tops or similar panels while still staying within common furniture edge proportions.
• The 1/2 inch shank is called out as the d dimension, and this shank size fits routers that take 1/2 inch bits so the tool can be held securely during profiling operations on table edges.

Router Bit Dimensions That Drive Installation Fit

This Amana Tool carbide tipped table edge ogee bit uses a 1/2 inch shank, so it seats into router collets designed for 1/2 inch tooling and supports a firm grip during table or hand-held routing. The overall length of 2-3/4 inches sets how far the bit projects from the collet, which helps determine how much height adjustment is available when dialing in the ogee reveal on a table edge. With a 2-1/2 inch diameter, the bit sweeps a broad arc, so clearance in router bases, fences, and inserts must align with that diameter during setup. The 3/4 inch cutting height defines how much of the bit can engage the work, so installers can position the bit to run full-depth or partial-depth profiles depending on the desired edge detail.

Using This Bit On Table Tops And Edges

Where This Ogee Router Bit Is Applied

This carbide tipped table edge ogee router bit is described for cutting table top edges, so it is intended for profiling the perimeter of tables and similar flat panels. The web description also states it can be used with handrail side profile bits, which means the 3/8 inch radius and ogee form can coordinate with a handrail side profile to create a matching multi-bit assembly. As an ogee hand or table edge router bit, it supports use in router tables for steady panel control or in guided setups for edge shaping, depending on how the work is held in the shop. The 2-1/2 inch diameter and 3/4 inch cutting height together allow the bit to reach across the full edge thickness of many tops, so the complete ogee profile can be formed along the workpiece perimeter.

Why These Dimensions Support Repeatable Profiles

The clearly specified 3/8 inch radius and 2-1/2 inch diameter on this Amana Tool table edge ogee router bit help maintain consistent results when repeating the same edge detail across multiple tops or matching an existing installation. Because the cutting height is defined as 3/4 inch, installers can set the bit height relative to the table surface and know exactly how much of the ogee shape will show on different material thicknesses. The 1/2 inch shank works with routers designed for this shank size, giving a solid hold that supports smoother cuts along long table edges. The carbide tipped construction means the cutting edges are made from carbide, so the profile stays closer to its intended dimensions over longer use, which helps keep the ogee shape uniform from piece to piece. The overall length of 2-3/4 inches further sets a predictable adjustment range in the router lift or base, making it easier to return to a previous setup when repeating a job.

Common Questions About This Ogee Router Bit

Choose This Bit For Defined Table Edge Profiles

This Amana Tool carbide tipped table edge ogee router bit combines a 3/8 inch radius, 2-1/2 inch diameter, and 3/4 inch cutting height to produce a consistent furniture-style edge on table tops. The 1/2 inch shank and 2-3/4 inch overall length support stable mounting and repeatable setup in routers built for this shank size. For projects that call for a defined ogee on table tops or coordination with handrail side profile bits, this bit provides a clearly specified profile that can be applied across multiple pieces with matching results.