Amana A.G.E. 9 Inch Saw Blade For Versatile Cuts
Amana A.G.E. 9 inch saw blade with 5/8 inch arbor and 40 teeth is designed for ripping and cross-cutting natural woods, so one blade can handle common table and radial arm saw work on solid stock. The blade handles general trimming and crosscutting of hardwood and softwood, plywood and composition materials, which lets one setup cover multiple sheet and board materials on a job. It also excels at cutting single or double-sided plastic-laminated material, which supports clean work on laminate tops and panels. The blade leaves a smooth, clean, chip-free finish on the top and bottom edges, reducing time needed for sanding or edge cleanup. Teeth consist of four ATB followed by one square raker, so the combination grind balances cutting speed and surface quality on straight cuts.
Key Saw Blade Details That Support Clean Work
- The 9 inch diameter with 5/8 inch arbor size fits saws built for this combination, so the blade seats properly for accurate table and radial arm cuts.
- The 40 tooth count handles general trimming and crosscutting of hardwood, softwood, plywood and composition materials, giving a balance between feed rate and smooth surfaces.
- The blade excels at cutting single or double-sided plastic-laminated material, so plastic-laminate workpieces can be processed while maintaining clean laminate edges.
- The blade leaves a smooth, clean, chip-free finish on the top and bottom edges, which supports finished surfaces directly off the saw in many woodworking applications.
- Large gullets in the saw body allow for deeper cuts and improved chip ejection despite short pitch, helping chips clear the kerf and supporting consistent cutting action.
- The blade body is fitted with a copper plug to reduce noise and run cooler, which supports a more comfortable cutting environment and helps the blade stay stable under load.
Combination Grind Saw Blade Setup And Cutting Behavior
The blade features a combination grind with four ATB and one raker tooth, so it is designed for ripping and cross-cutting natural woods without changing blades between operations. An Alternate Top Bevel (ATB) grind is used for cross-cutting, cut-off and trimming, which helps sever wood fibers cleanly on crosscuts. A Triple Chip Grind (TCG) is described as perfect for hard, abrasive materials like non-ferrous metals, hardwoods and plastics, so this tooth geometry helps manage tougher, more abrasive cuts. The blades in this series feature a high tooth count, the triple-chip grind and a 10 degree hook angle for a successful compromise between feed effort and cut finish, so the blade is tuned to balance push effort with surface quality. A 15 degree hook and combination grind work together to influence how the blade enters the material.
Using This Combination Grind Blade In Wood Shops
Where This Circular Saw Blade Excels In Use
This circular saw blade is in the table and radial arm saw blades category, so it is suited to stationary saw setups commonly used in wood shops. It handles general trimming and crosscutting of hardwood and softwood, plywood and composition materials, which supports everyday sizing of framing, cabinet parts and sheet components. The blade is designed for ripping and cross-cutting natural woods, so both along-grain and across-grain operations on boards can be handled without changing to a dedicated rip blade. It also excels at cutting single or double-sided plastic-laminated material, which is typical for laminate countertops and cabinet panels that need clean laminations at the cut line. Leaves a smooth, clean, chip-free finish on the top and bottom edges, which helps preserve laminate faces and veneer surfaces when working from either side on a table or radial arm saw.
Tooth Geometry And Hook Angles For Repeatable Results
The teeth consist of four ATB followed by one square raker, so the combination grind evens out cutting forces while still scoring the surface fibers for smoother edges. The Alternate Top Bevel grind is described for cross-cutting, cut-off and trimming, which means the beveled top edges of the teeth help slice across grain and laminated faces for a cleaner cut. Triple Chip Grind is described as perfect for hard, abrasive materials like non-ferrous metals, hardwoods and plastics, so this geometry helps spread the cutting load and manage wear when working harder stock. The blades in this series feature a high tooth count, the triple-chip grind and a 10 degree hook angle for a successful compromise between feed effort and cut finish, giving a balance that supports controlled pushing while still achieving a fine surface. A 15 degree hook and combination grind influence how aggressively the blade engages the material, helping maintain a predictable cutting feel. Large gullets in the saw body allow for deeper cuts and improved chip ejection despite short pitch, which supports steady chip removal and helps maintain cut quality over longer passes.
Common Buyer Questions About This A.G.E. Saw Blade
What types of materials does this 9 inch 40 tooth saw blade handle well?
The blade handles hardwood, softwood, plywood, composition materials and excels at single or double-sided plastic-laminated material, so one blade can work across common wood and laminate stock.
How does the 5/8 inch arbor on this blade affect saw setup?
The 5/8 inch arbor size matches saws built for that spindle, so the blade centers correctly and supports accurate table and radial arm saw cutting.
Why is a combination grind useful for ripping and cross-cutting natural woods?
The teeth use four ATB followed by one square raker, so the combination grind supports both along-grain ripping and across-grain cross-cutting on natural woods with one blade.
How does this triple chip grind saw blade help with hard or abrasive materials?
The Triple Chip Grind is described as perfect for hard, abrasive materials like non-ferrous metals, hardwoods and plastics, so it spreads cutting load and manages edge wear in these cuts.
What finish quality can be expected on laminated or veneered panels?
The blade leaves a smooth, clean, chip-free finish on the top and bottom edges, so laminated or veneered panels retain clean faces at the cut line.
How do the large gullets and copper plug affect cutting performance?
Large gullets allow deeper cuts and improved chip ejection, while the copper plug helps reduce noise and run cooler, supporting steady cutting behavior.
Select This Blade For Versatile Wood And Laminate Cutting
The Amana A.G.E. 9 inch saw blade with 5/8 inch arbor and 40 tooth combination grind is designed for ripping and cross-cutting natural woods, which aligns with everyday table and radial arm work. Handling hardwood, softwood, plywood, composition materials and plastic-laminated material, the blade supports a wide range of shop tasks with one setup. A high tooth count with ATB and Triple Chip Grind plus described hook angles balances feed effort with cut finish, supporting controlled passes. Large gullets and a copper plug support chip ejection, cooler running and reduced noise during extended use. For shops needing one circular saw blade that delivers clean, chip-free edges on wood and laminated stock, this model 694004 offers a focused option.
