Berenson Advantage Two 3" (76 mm) Center to Center Oiled Bronze Pull, 0928-1OB-P

Berenson Advantage Two Pull For Cabinet Projects

Berenson Advantage Two pull gives you a 3 inch center to center handle in an oiled bronze finish, so you get a consistent look across cabinet doors and drawers. The pull is part of the Advantage Series, which keeps style and sizing uniform from piece to piece on a run. Its zinc die cast material provides a solid feel in the hand, which helps doors and drawers open with less flex at the mounting points. The 5-1/4 inch overall length spans more of the front, which visually balances standard cabinet fronts while leaving room around the hand grip. A 1 inch projection sets the pull off the surface enough for a comfortable fingers-under grip without catching clothing during daily use. The 1/2 inch width keeps the profile slim, which works well on both narrow rail frames and wider drawer fronts.

Key Pull Details That Support Daily Use

• The 3 inch center to center dimension matches a common drilling pattern, which helps align this pull with existing or planned 3 inch boring for straightforward layout on cabinet doors and drawers.
• The 5-1/4 inch overall length provides extra bar beyond the mounting points, which creates a more secure hand hold when pulling wider or heavier drawers in a kitchen or shop setting.
• The oiled bronze finish defines the color and surface look, which lets you coordinate this pull with other oiled bronze decorative hardware across the same room or cabinetry bank.
• The zinc die cast construction forms the pull from a consistent metal base, which supports repeatable hole spacing and shape when you are installing multiple pulls in a linear run.
• The 1 inch projection sets the distance off the face of the cabinet, which helps installers maintain a uniform stand-off line across all doors and drawers along a cabinet wall.

Mounting Dimensions For Straightforward Alignment

The 3 inch center to center mounting dimension defines the hole spacing, which lets you lay out bores accurately in a straight line across doors and drawers. A 5/8 inch base diameter gives you a clear footprint at each mounting area, which helps cover standard drilled holes while keeping the contact point compact on narrower rails. The 1/2 inch width along the bar defines how much of the rail face the pull occupies, which matters when you are balancing sightlines between adjacent pulls. With a 1 inch projection, the pull sits off the surface at a consistent depth, which supports even shadow lines and finger clearance across a full cabinet installation.

Using This Berenson Pull In Cabinet Layouts

Where This 3 Inch Pull Works Best

This Berenson Advantage Two Series 3 inch center to center pull fits cabinet doors and drawers that are bored on the 3 inch pattern, which is common in many residential and shop layouts. The 5-1/4 inch total length lets you span more of the drawer or door front, which helps visually anchor hardware on mid-size fronts without overwhelming smaller ones. Its oiled bronze finish aligns with projects calling for warm, darker decorative hardware, which is useful when matching hinges or other oiled bronze components. The zinc die cast material supports use across multiple rooms, because the uniform metal base keeps appearance and dimensions consistent from pull to pull.

Dimensions That Support Consistent Results

The 3 inch center to center measurement gives a fixed drilling reference, which helps your jigs and templates line up from cabinet to cabinet without resetting for a different spacing. A 5/8 inch base diameter at each mounting point defines the bearing surface, which helps seat the pull firmly against the door or drawer front once fastened. The 1 inch projection and 1/2 inch width work together to define the grip area, which provides clearance for fingers while keeping the profile tight to the cabinet face. Because the Advantage Series designation keeps styling within the same family, you can repeat these dimensions across a project, which simplifies your layout work and keeps the finished layout visually uniform.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 3 Inch Layout Runs

The Berenson Advantage Two pull in oiled bronze gives you a defined 3 inch center to center layout, a 5-1/4 inch overall length, and zinc die cast construction, so cabinet runs share the same spacing, look, and feel. For projects built around 3 inch boring and an oiled bronze appearance, this pull provides a matched option for doors and drawers across your installation.