Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Advantage Plus 4 knob 1-1/4 inch identifies this Berenson Corporation knob as part of the Advantage Plus Four Series, which groups it with matching decorative hardware so cabinets and drawers can share a consistent look across a project. The brushed nickel finish on this knob provides a neutral metallic tone that coordinates with many hinge and appliance finishes, simplifying finish selection on mixed hardware jobs. The knob diameter of 1-1/4 inches establishes a comfortable grasping area, which helps users get a solid pull on standard cabinet and drawer fronts. A projection of 1-1/8 inches sets how far the knob stands off the door or drawer face, giving fingers room behind the pull while keeping profiles tight to the cabinetry. The base diameter of 1-3/16 inches defines the footprint on the wood surface, which helps visually cover the drilled hole while keeping the hardware visually balanced on narrow rails and stiles.
The 1-1/4 inch length or diameter of this Berenson knob sets a predictable center point for drilling, which supports consistent knob placement across multiple cabinet doors or drawer fronts. The base diameter of 1-3/16 inches means the contact area around the mounting hole is slightly smaller than the overall knob face, which keeps the visible footprint compact while still covering the bore on typical cabinet stock. The 1-1/8 inch projection from the mounting surface defines how far the hand extends from the face, which can help avoid interference with adjacent doors when reveals are tight. The specified 8-32 screw size with 1 inch length gives a standard machine thread reference, which coordinates with common cabinet drilling and fastening practices on typical panel thicknesses.
This Berenson Advantage Plus Four Series knob, with its 1-1/4 inch diameter, suits cabinet doors and drawers that benefit from a modestly sized pull point, supporting both small vanity fronts and wider kitchen units. The 1-1/8 inch projection positions the gripping surface away from the cabinet face, which can help on profiled or routed doors where fingers need clearance near decorative edges. The 1-3/16 inch base diameter sits close to the knob size, giving the hardware a compact footprint that works well on narrower rails and stile frames. The brushed nickel finish on this knob allows it to coordinate with other brushed nickel elements, which helps maintain finish continuity across hinges, pulls, and visible metal components in the same room. The zinc die cast construction supports consistent shape and size from knob to knob, which is useful when hardware is repeated across long cabinet runs.
The 1-1/4 inch diameter and width create a clear reference when laying out drill points, which reduces layout variation from door to door and helps installers maintain straight visual lines along upper and lower cabinets. The defined 1-1/8 inch projection keeps the pull distance uniform across an installation, so drawers and doors present an even profile when viewed from the side. The 1-3/16 inch base diameter sets a regular bearing surface against the wood, which can help distribute the pulling force around the mounting hole during repeated opening and closing. The 8-32 x 1 inch screw size listed for this knob establishes a standard hardware interface, which supports using familiar drilling diameters and thread tapping expectations in cabinet shop or onsite work. Being part of the Advantage Series ties this knob to a broader decorative group, which simplifies hardware selection when a project calls for mixing knobs and pulls that still read as one coordinated set.
This Berenson Advantage Plus Four Series knob has a 1-1/4 inch, or 32 mm, diameter, providing a moderate gripping surface suited to typical cabinet doors and drawers.
The knob has a projection of 1-1/8 inches, setting a consistent stand-off from the cabinet surface that offers finger clearance without extending excessively.
The knob is made from zinc die cast material, giving it a precisely formed profile that supports consistent sizing across multiple pieces.
This 1-1/4 inch diameter knob has a brushed nickel finish, allowing it to coordinate with other brushed nickel hardware in the same space.
The specified screw size for this knob is 8-32 x 1 inch, giving a standard machine thread and length reference for cabinet mounting.
The 0955-1BPN-P designation is the manufacturer part number for this Berenson Advantage Plus Four Series brushed nickel knob, helping identify this exact size and style.
The Berenson Advantage Plus Four Series brushed nickel knob with 1-1/4 inch diameter, 1-3/16 inch base diameter, and 1-1/8 inch projection provides defined dimensions for repeatable cabinet work. The zinc die cast construction and brushed nickel finish establish a consistent appearance that aligns with other brushed nickel hardware. With its stated 8-32 x 1 inch screw specification and clearly listed sizes, this knob offers predictable fit characteristics for cabinet doors and drawers laid out to standard drilling practices. For projects using the Advantage Series, this model brings a matched look across units while maintaining functional clearances at each pull point.
Sold In: 1 Each
