Berenson Advantage Two 2-1/2" (64 mm) Center to Center Antique Pewter Cup Pull, 0965-1AP-P

Berenson Advantage Two Cup Pull For Cabinets

Berenson Advantage Two cup pull is a zinc die cast cabinet handle in the Advantage Series designed for decorative hardware applications on doors and drawers. The 2-1/2 inch (64 mm) center to center mounting spreads the load across the front, which helps maintain alignment on typical cabinet faces. The antique pewter finish presents a muted, traditional appearance that pairs well with many stained or painted surfaces in woodworking projects. The pull length of 3-3/16 inch provides finger clearance across the grip area, which supports consistent opening force on drawers. A projection of 1 inch sets the hand away from the cabinet face, reducing contact with finished surfaces during daily use. The 1-1/16 inch width creates a compact profile, which is useful when multiple pulls are installed on narrower drawer fronts or smaller doors.

Key Advantage Series Cup Pull Details For Projects

• The zinc die cast material forms a solid, uniform cup pull body, which supports repeatable drilling layouts and predictable handling during cabinet installation work.
• The antique pewter finish defines the surface appearance of the pull, which helps coordinate hardware across a project where a consistent finish theme is required.
• The 2-1/2 inch (64 mm) center to center dimension sets the hole spacing, which allows installers to use common drilling jigs for accurate placement on cabinet fronts.
• The overall length of 3-3/16 inch positions the ends of the pull beyond the mounting holes, which provides a clear visual reference for aligning multiple pulls in a straight line.
• The 1 inch projection locates the gripping edge off the face of the cabinet, which gives fingers room to pull without rubbing finished wood or laminate surfaces.
• The 1-1/16 inch width defines the front-to-back face of the cup shape, which helps when planning clearances on narrow rails or small drawer fronts.
• The 8-32 x 1 inch screw size matches a common cabinet hardware thread standard, which simplifies selection of matching threaded fasteners during installation work.

Mounting And Sizing Details For This Cup Pull

This Advantage Series cup pull uses a 2-1/2 inch (64 mm) center to center layout, so installers can rely on a straightforward two-hole boring pattern on drawer and door fronts. The 3-3/16 inch overall length gives a modest margin beyond the holes, which is helpful for visual alignment along rails and stile edges. With a 1 inch projection, the pull stands off the face enough to grip from above or below, which supports access on both drawers and doors. The 1-1/16 inch width keeps the footprint compact, which works well on smaller cabinetry while still providing a defined handhold. The 8-32 x 1 inch screw size matches a widely used cabinet thread standard, which fits typical shop processes built around that fastener specification.

Using This Antique Pewter Cup Pull In Work

Where This Berenson Cup Pull Fits Best

This Berenson Corporation Advantage Two Series cup pull belongs in decorative hardware and moldings under handles and pulls, so it is suited to cabinet doors and drawer fronts in woodworking projects. The antique pewter finish supports traditional or transitional cabinet looks, which is useful when coordinating hardware with existing hinges or other visible components that share similar tones. Because the pull is 3-3/16 inch long with a 2-1/2 inch (64 mm) center to center dimension, it fits comfortably on standard drawer widths, allowing multiple pulls across banks of drawers without crowding. The compact 1-1/16 inch width and 1 inch projection help when space is tight around face frames, as the pull stays close to the cabinet while still creating a clear grip edge. As part of the Advantage Series, it aligns visually with other pulls from the same collection, which helps keep a consistent style across an entire installation.

Details That Support Consistent Cabinet Results

The defined 2-1/2 inch (64 mm) center to center spacing on this cup pull gives installers a fixed drilling pattern, which supports the use of jigs or templates for repeatable hardware layouts across multiple cabinets. Zinc die cast construction produces identical parts from piece to piece, which helps maintain consistent spacing from door edges and drawer tops when measured from the pull body. The 1 inch projection establishes a standard standoff depth, creating a uniform shadow line along cabinet runs that many shops use as a visual quality check. With the 3-3/16 inch length and 1-1/16 inch width, the pull offers a predictable footprint on the face, which simplifies shop drawings and cut lists where hardware locations are dimensioned. The antique pewter finish gives a stable, defined color tone, which allows designers and installers to plan matching knobs or other pulls in the same finish without variation concerns. The 8-32 x 1 inch screw size aligns with common boring depths in cabinet fronts, supporting efficient bench setups during production work.

Common Questions About This Advantage Series Pull

Select This Cup Pull For Defined Cabinet Layouts

The Berenson Advantage Two Series 2-1/2 inch (64 mm) center to center antique pewter cup pull brings a known drilling pattern, zinc die cast construction, and compact 3-3/16 inch by 1-1/16 inch footprint to cabinet projects. The 1 inch projection and antique pewter finish support a consistent look and usable grip on drawers and doors. For installations where repeatable layouts, Advantage Series styling, and a specific 0965-1AP-P part reference matter, this cup pull is suited to both production shops and serious DIY cabinet work.