Nexis 1-D Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro Screws, 0mm

Nexis Wing Mounting Plate For Cabinet Hinges

Nexis 1-D adjustable wing mounting plate gives you a dedicated base for Grass Nexis hinges, so you can mount the hinge to the cabinet side and fine-tune overlay using the built-in height adjustment. This plate belongs to the Grass America Nexis hinge system and is part of their hinge mounting plates class, so it matches the Nexis clip-on connection and keeps installations consistent across a job. The 0mm plate height establishes a neutral starting position at the cabinet side, letting the hinge geometry define the overlay while you use the cam for final alignment. Stamped steel construction provides an economy-grade plate that handles typical cabinet hinge loads in woodworking environments where Grass hardware is commonly used. Nickel-plated finish on the plate offers a clean, metallic surface that aligns with other Grass Nexis components, which helps create a uniform look on professional cabinet installations.

Key Nexis Mounting Plate Details For Installers

• This hinge mounting plate uses a clip-on design to connect to Grass Nexis hinges, which lets you engage or release the hinge from the cabinet side quickly during fitting and adjustment on the bench or at final install.
• The cabinet side fixing style is two point, so you fasten the plate to the side at two locations for stable anchoring that resists shifting when doors are cycled or when you adjust the hinge overlay.
• All Nexis base plates offer plus or minus 2 mm of height adjustment, allowing you to correct small drilling deviations and align doors across a run without remaking the cabinet or moving the drilling pattern.
• This model is supplied as a pre-mounted Euro screw version, so the Euro screws are already positioned in the plate thread points to suit system 32 style cabinet construction where Euro screws are commonly used.
• The 0mm designation in the description identifies the plate height, giving you a flat reference at the cabinet side that matches other 0mm Nexis layouts when you are standardizing a hinge program.

Mounting And Adjusting The Nexis Base Plate

This Grass Nexis hinge mounting plate is built for cabinet side mounting with a two point fixing layout, so you attach it directly to the cabinet side panel where the Nexis hinge arm will clip on. The plate integrates plus or minus 2 mm of height adjustment through its cam design, giving you a simple way to raise or lower the door relative to the cabinet after the screws are installed. Its 0mm plate height means the mounting surface sits flat on the cabinet side, which supports predictable reveals based on the Nexis hinge geometry. The pre-mounted Euro screws match common Euro-style cabinet construction methods, so you can drive the screws directly into system 32 drillings that are sized for Euro screw threads without changing to a different base plate format.

Using This Grass Nexis Plate In Real Work

Where This Nexis Hinge Plate Fits Best

This Grass Nexis base plate is used wherever Grass Nexis hinges are applied on cabinet side panels, giving you a matching mounting interface for the Nexis clip-on hinge arm. As a hinge mounting plate in the Grass America Nexis family, it supports cabinet hinge installations in woodworking projects where a stamped steel, economy-level plate is appropriate. The 0mm cam wing plate height works in layouts that call for a flat mounting plane on the cabinet side, so door position is determined by the hinge arm and cup geometry instead of an offset base. Two-point fixing on the cabinet side stabilizes the plate in typical cabinet materials, which helps maintain consistent reveals as doors are opened and closed during normal use. Because this model uses pre-mounted Euro screws, it fits cabinet side construction that follows Euro-style drilling and allows installers who use Euro screws to stay with a familiar fastening method.

Why Nexis Plate Details Support Accurate Results

The clip-on connection between this Nexis base plate and the Nexis hinge lets you remove or refit doors without disturbing the plate position, which is helpful when adjusting interiors or finishing work around installed cabinets. Plus or minus 2 mm of height adjustment built into all Nexis base plates means this plate gives you vertical tuning at the cabinet side, so small drilling variances do not force layout changes or re-drilling of hinge cups. The 0mm plate height serves as a repeatable reference dimension in hinge planning, so when you specify this 0mm Nexis base plate across a project you can rely on the same starting geometry at every cabinet. Nickel-plated steel construction supports normal hinge loading while presenting a finished surface that pairs with other nickel Nexis components, which keeps the internal hardware appearance consistent when cabinets are opened. The pre-mounted Euro screw format speeds installation on system 32 cabinets because the screws are already selected to work with Euro-style borings, saving a step compared with selecting and positioning separate fasteners for each plate.

Common Nexis Wing Mounting Plate Questions

Selecting This Nexis Plate For Cabinet Work

The Nexis 1-D adjustable wing mounting plate with 0mm height, two point fixing, and plus or minus 2 mm cam adjustment gives cabinet builders a defined base for Grass Nexis hinges. When a job calls for a stamped steel, nickel-plated Nexis base plate with pre-mounted Euro screws and clip-on connection, this model provides those details in one part number. Choosing this hinge mounting plate across a project standardizes cabinet side geometry, which supports consistent overlays and a straightforward adjustment process on every Nexis-hinged door.