Nexis 1-D Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro Screws, 2mm
Description
Nexis Wing Mounting Plate For Clip-On Hinges
Nexis 1-D adjustable wing mounting plate gives installers a stamped steel base for Grass Nexis hinges, so the hinge clips on to a stable foundation and keeps doors tracking consistently over time. The nickel-plated finish protects the steel body during everyday cabinet use, which supports long-term hinge performance in busy environments. This hinge mounting plate uses a two point cabinet side fixing style, so the plate anchors at two locations on the cabinet side for predictable placement. The plate provides plus or minus 2 mm of height adjustment, allowing the hinge position to shift slightly up or down when dialing in reveal and alignment. Pre-mounted Euro screws come already set in the plate, so the installer can drive the plate directly into a Euro-bored cabinet side without handling loose fasteners during the job.
Key Nexis Mounting Details For Cabinet Work
- The base plate is constructed of economy stamped steel, giving the hinge a rigid mounting surface that helps doors swing smoothly and stay aligned under regular use.
- A nickel-plated finish covers the steel base plate, so the surface resists wear as doors move, helping maintain clean operation where the hinge and plate connect.
- Cabinet side fixing style is two point, positioning the plate with two anchor locations that support consistent placement across multiple doors on a run.
- The plate offers plus or minus 2 mm of height adjustment, letting the installer fine-tune vertical position after mounting to even out cabinet door reveals.
- A clip-on design connects the Grass Nexis hinge to the base plate, allowing the hinge arm to attach and detach from the plate quickly during installation or adjustment.
- Pre-mounted Euro screws are set in the plate from the factory, so the plate can be driven into Euro-style cabinet side holes without separate screw handling.
Mounting And Adjustment For Nexis Hinge Plates
This Grass Nexis base plate is part of the hinge mounting plates category, so it serves as the interface between the Nexis hinge and the cabinet side. The two point cabinet side fixing style lets the installer place the plate, run the Euro screws into the cabinet side, and have a defined position for the hinge arm. Once mounted, the plus or minus 2 mm of height adjustment on the plate gives room to raise or lower the door slightly without relocating the plate. The clip-on connection between the hinge and plate simplifies removing a door during fitting or later work, since the hinge arm detaches from the plate while the plate stays secured to the cabinet.
Using The Grass Nexis Base Plate In Cabinet Runs
Where This Hinge Mounting Plate Fits Best
Grass Nexis base plates function as hinge mounting plates in cabinet projects where Grass Nexis hinges are specified, so the hinge arm has a matching clip-on interface. The 2mm designation identifies the plate height in the Nexis system, helping installers coordinate this plate with the hinge geometry for their layout. With cabinet side fixing style set as two point, this plate is suited to cabinet sides prepared for that fixing pattern, supporting repeatable hole drilling across multiple boxes. Because the plate is constructed of economy stamped steel with a nickel-plated finish, it suits typical indoor cabinet environments where a metal mounting surface is needed behind the hinge.
How Nexis Plate Adjustment Supports Clean Results
The plus or minus 2 mm of height adjustment built into this Nexis 1-D adjustable wing mounting plate lets installers refine door position after the plate is mounted, reducing rework on cabinet side holes. By adjusting the plate within that 2 mm range, small variations in drilling or box construction can be absorbed while still achieving an even reveal from door to door. The clip-on design between the Grass Nexis hinge and the base plate means the hinge arm can be removed during this fine-tuning without disturbing the fixed plate, which helps keep alignment consistent once it is dialed in. Using the same Grass America F060073177236 plate across a run standardizes the hinge interface, so every door in the project responds similarly to adjustment.
Common Questions About This Nexis Mounting Plate
What type of product is the Grass Nexis plate?
The Grass Nexis base plate is a hinge mounting plate, so it forms the fixed connection point between a Grass Nexis hinge and the cabinet side panel during installation.
How does the two point cabinet side fixing help?
The two point cabinet side fixing style locates the plate with two anchors, helping repeat the same hinge position across multiple cabinet boxes in a run.
What adjustment range does this Nexis plate provide?
The Nexis 1-D adjustable wing mounting plate offers plus or minus 2 mm of height adjustment, allowing vertical fine-tuning of door position after mounting.
Why is the plate made from stamped steel?
The base plate is constructed of economy stamped steel, providing a rigid metal support so the Nexis hinge has a stable surface for repeated door movement.
What is the role of the nickel-plated finish?
The nickel-plated finish protects the stamped steel surface during routine door use, supporting smooth interaction where the hinge clips onto the mounting plate.
How does the clip-on design affect installation?
The clip-on design lets the Grass Nexis hinge arm attach to and release from the base plate quickly, streamlining door hanging and later adjustment work.
Selecting This Nexis Plate For Your Hinge Layout
The Nexis 1-D adjustable wing mounting plate with pre-mounted Euro screws lets installers pair Grass Nexis hinges with a matched 2mm hinge mounting plates solution. By using the two point cabinet side fixing style and plus or minus 2 mm height adjustment, this plate supports consistent reveals across a full cabinet run. When a project calls for a Grass Nexis base plate constructed of economy stamped steel with a nickel-plated finish, this F060073177236 model from Grass America provides that defined mounting platform.
