Amerock Conrad Cabinet Pull For Kitchens And Baths

Amerock Conrad cabinet pull uses a 3-3/4 inch (96 mm) center-to-center hole spacing, which matches many standard cabinet drill patterns so installers can align and swap pulls without re-drilling. Its 5-1/2 inch (140 mm) overall length gives fingers clear grab space, helping doors and drawers open smoothly in daily use. The pull projects 1-1/16 inch (27 mm) from the surface, creating room for hands while keeping the profile tight to the face for a streamlined look on fronts. A 7/16 inch (11 mm) width balances comfortable contact with a slim visual line, supporting contemporary and transitional layouts. The Conrad collection's clean flowing lines with strong edges provide a consistent modern appearance across a bank of cabinets, which helps installers deliver a coordinated finish throughout a kitchen or bath.

Key Conrad Pull Details That Support Projects

• The 3-3/4 inch (96 mm) center-to-center dimension sets a predictable mounting pattern, so replacing existing pulls with matching spacing is straightforward on retrofit jobs.
• The 5-1/2 inch (140 mm) overall length offers ample hand clearance across the pull, making it practical for wider drawers or frequently used cabinet doors.
• A 1-1/16 inch (27 mm) projection keeps the pull easy to grasp while limiting how far it stands off the cabinet, which helps in tight walkways and close cabinetry runs.
• The 7/16 inch (11 mm) width creates a slim front profile that suits contemporary lines yet still provides enough surface for a solid, comfortable grip.
• Base dimensions of 1 inch by 7/16 inch help distribute contact at the mounting points, supporting a neat, defined footprint against the cabinet surface.
• The Conrad collection design with clean flowing lines and strong edges supports a unified aesthetic when repeating this pull across multiple doors and drawers.

Mounting And Fit Details For Conrad Pull

This Conrad pull uses a 3-3/4 inch (96 mm) center-to-center layout, so hole placement remains consistent across cabinets for measured, repeatable installs. The 5-1/2 inch (140 mm) length spans slightly beyond the mounting points, letting the pull visually anchor wider drawer fronts. Its 1-1/16 inch (27 mm) projection defines how far the hand sits from the door face, helping doors clear adjacent fronts during operation. A 7/16 inch (11 mm) width and 1 inch by 7/16 inch base layout shape how the pull seats to the surface, creating a precise contact area that supports straight alignment along cabinet rails and stiles.

Using This Satin Nickel Cabinet Pull In Projects

Where The Conrad Series Satin Nickel Pull Fits

The Conrad series satin nickel pull is part of Amerock decorative hardware and moldings, placing it squarely in kitchen and bath cabinet work where visual consistency matters. Its satin nickel finish coordinates with many brushed fixtures, helping tie together faucets, hinges, and appliances in a single run. The pull's clean flowing lines and strong edges work in contemporary and transitional kitchen designs, so it suits flat-panel fronts as well as simple framed doors. With a 3-3/4 inch (96 mm) center-to-center dimension, this pull fits cabinets drilled to that common spacing, allowing lines of doors and drawers to share the same visual rhythm. The 5-1/2 inch (140 mm) length looks proportionate on both upper doors and base cabinets, supporting a single-pull standard across the room.

Details That Support Repeatable Cabinet Install Results

The specified 3-3/4 inch (96 mm) center-to-center spacing provides a fixed reference for drilling jigs and templates, helping installers repeat hole positions accurately from cabinet to cabinet. The 1-1/16 inch (27 mm) projection defines standoff from the face, which helps maintain consistent finger clearance on every door in a run. A 7/16 inch (11 mm) width and 1 inch by 7/16 inch base profile guide how the pull lines up relative to rail edges or stile centers, supporting straight, uniform positioning. The Conrad collection's combination of clean lines and strong edges creates clear sight lines along the hardware, making it easier to visually check alignment down a row of doors. Constructed from zinc die-cast material, the pull provides a solid-feeling grip as doors and drawers are opened repeatedly in everyday kitchen and bath use.

Common Questions About Amerock Conrad Cabinet Pull

Selecting This Pull For Cabinet Install Projects

The Amerock Conrad cabinet pull in satin nickel pairs a 3-3/4 inch (96 mm) center-to-center pattern with a 5-1/2 inch (140 mm) length, giving installers a known layout that works across many cabinet runs. Its zinc die-cast construction and defined 1-1/16 inch (27 mm) projection support daily operation in kitchens and baths. For projects calling for a clean, contemporary look with consistent dimensions, this Conrad BP29200G10 pull offers a clear, repeatable hardware choice.