Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you pull-out access to stored clothing and accessories in a side-mounted closet system. This chrome closet basket is a steel closet basket sized at 18 inches wide, 14 inches deep, and 18 inches high. Rev-A-Shelf lists this product as a side mount chrome closet basket in its closet basket line. The pull-out closet basket uses heavy duty ball bearing slides with a bayonet mounting system configured to the 32mm system. The basket rests on top of the slides, which helps reduce the torque twist found in other designs. For buyers planning a closet storage basket upgrade, this wire closet basket is also designed to be easily removed and reinstalled when needed.
Key specs to confirm: This Rev-A-Shelf side mount closet basket is listed at 18 inches wide, 14 inches deep, and 18 inches high. Buyers should confirm the clear opening, side clearance, mounting surface, and vertical space needed for both the basket and slide travel. The product uses heavy duty ball bearing slides with a bayonet mounting system configured to the 32mm system, so installers should verify that the closet panel drilling or layout matches that format. The basket is steel with a chrome finish. A 100 lb slide rating appears in the verified web description, but buyers should still confirm current technical documentation and installation guidance for the complete assembly.
What's included: Verified information confirms an individual pack closet basket assembly with slides. If you need screws, templates, or additional mounting hardware details, confirm included items before ordering.
What to verify before ordering: Check opening width, usable depth, inside height, side panel strength, 32mm system compatibility, and whether your project needs a removable closet basket for cleaning or access. Follow manufacturer installation guidance and local building requirements where applicable.
A pull-out closet basket works well when shelves make it hard to reach smaller items at the back of a closet. Installers and serious DIY buyers often use this product type for folded shirts, accessories, light linens, or other items that benefit from open visibility. Because this Rev-A-Shelf closet basket slides out, the user can access stored contents without unloading a fixed shelf first.
This 18 x 14 x 18 closet basket is useful when the project calls for a tall basket profile and a moderate front-to-back depth. The 14 inch depth can be a practical choice in closets where deeper storage may interfere with doors, framing, or adjacent components. The 18 inch width should be confirmed against the opening so the side mount closet basket has proper support and travel.
The wire closet basket format also helps users see contents quickly. That can reduce time spent sorting through stacked piles on flat shelving. In a reach-in closet, a chrome closet basket can separate categories like socks, workout gear, or seasonal items. In a dressing area or utility closet, the same basket style can support organized pull-out storage where visibility matters.
Rev-A-Shelf states that the basket is designed to be easily removable and effortlessly reinstalled. That matters when a buyer wants to clean the basket, rework the closet layout, or carry contents to another work surface. The basket also rests on top of the ball bearing slides. According to the verified description, this design helps eliminate the torque twist inherent in other designs. For a buyer comparing basket layouts, that detail is relevant because it speaks to how the basket is supported during movement.
Before installation, buyers should confirm the mounting layout, clearances, and whether the side panels are prepared for a bayonet mounting system configured to the 32mm system. If your project uses a different drilling pattern or custom framing, verify compatibility in advance.
When comparing closet basket options in general, buyers usually look at finish, basket size, slide style, and how the basket is supported. This steel closet basket from Rev-A-Shelf gives you a defined set of verified details: steel construction, chrome finish, side mount installation, 18 inch width, 14 inch depth, 18 inch height, and heavy duty ball bearing slides.
Another point buyers often compare is serviceability. A removable closet basket can be easier to clean and easier to reload outside the closet. Rev-A-Shelf specifically notes that the basket is designed to be removed and reinstalled with little effort. That can be useful in busy closets where the storage plan changes over time.
Slide support also matters. Some buyers want a pull-out closet basket that stays aligned under repeated use. This product uses ball bearing slides, and the basket rests on top of them rather than hanging in a way that may introduce twist. For a practical buyer, that is a meaningful design detail to review alongside opening size and mounting method.
Finish consistency can matter as well. This model is the chrome version, which helps buyers match other closet hardware or maintain a bright metal look across the project. If your closet system has specific finish requirements, confirm that chrome is the right match before ordering. If your project needs a different depth, finish, or related basket format, review the available series options in the product line and confirm exact dimensions rather than assuming interchangeability.
The Rev-A-Shelf closet basket is 18 inches wide, 14 inches deep, and 18 inches high.
This side mount closet basket is designed for side-mounted installation with slides.
The pull-out closet basket is verified with heavy duty ball bearing slides in the product description.
The Rev-A-Shelf closet basket is designed to be easily removable and reinstalled.
This closet storage basket uses a bayonet mounting system configured to the 32mm system.
This wire closet basket requires buyers to confirm opening width, depth, height, and side panel compatibility before ordering.
This steel closet basket has a chrome finish.
The product description references a 100 lb slide rating, but buyers should confirm current technical documentation for the full assembly.
This removable closet basket requires confirmation of clearances, mounting layout, 32mm compatibility, and panel strength. Follow manufacturer installation guidance and local building requirements where applicable.
Steel closet basket buyers usually want clear fit information and dependable pull-out access. This Rev-A-Shelf closet basket is a chrome, side-mounted unit sized at 18 inches wide, 14 inches deep, and 18 inches high, with heavy duty ball bearing slides and a removable basket design. Before purchase, confirm your opening size, side-mount layout, and 32mm system compatibility. Included items are verified as an individual pack basket with slides, and any project-specific mounting hardware details should be checked before ordering.
Sold In: 1 Each
