Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pull out closet basket gives organized, visible storage for closet systems that need easy access to folded clothing, accessories, or other household items. This Rev-A-Shelf closet basket is a steel closet basket with a chrome finish, sized at 18 inches wide, 20 inches deep, and 7 inches high. The side mount closet basket uses heavy duty closet basket slides with a ball bearing closet basket design rated at 100 lb. The basket rests on top of the slides, which helps reduce the torque twist found in some other basket layouts. Rev-A-Shelf also designs this removable closet basket to be easily taken out and reinstalled, which can help during cleaning, seasonal reorganization, or layout changes inside a closet system.
Key specs to confirm: This Rev-A-Shelf side mount closet basket is listed at 18 inches wide, 20 inches deep, and 7 inches high, with a chrome finish and steel construction. Buyers should confirm the opening width, interior depth, and vertical clearance needed for both the basket and slide travel. The product uses heavy duty ball bearing slides rated at 100 lb and a bayonet mounting system configured to the 32 mm system. Confirm that your closet panels or cabinet sides support this mounting method. If you need safety, compliance, or any additional structural details beyond the verified load rating, those details should be confirmed with the manufacturer or technical documentation.
What's included: Verified information confirms an individual pack of the Rev-A-Shelf closet basket assembly. Specific included hardware details should be confirmed before ordering.
What to verify before ordering: Check your opening size, side panel condition, mounting layout, required slide clearance, and whether your project uses a 32 mm system. Confirm the included hardware list if you need exact fasteners for a new install or replacement job.
A pull out closet basket is often chosen when shelves leave items stacked too tightly or too far back to reach. In reach-in closets, wardrobe towers, and utility storage sections, buyers usually want to separate folded clothes, small linens, bags, or accessories without losing visibility. This Rev-A-Shelf closet basket addresses that need with an open steel wire format and pull-out access. The 18 x 20 x 7 closet basket size is useful when the project calls for a wider basket with moderate height and full-depth storage.
Installers and serious DIY buyers also look closely at slide type because basket movement affects daily use. This model uses closet basket slides that are heavy duty, ball bearing, and rated at 100 lb. That matters when the basket will hold heavier folded garments or when a closet system is used every day. The basket rests on top of the slides, and Rev-A-Shelf states that this helps eliminate the torque twist inherent in other designs. For buyers who have dealt with baskets that bind or rack during pull-out, that layout is an important detail to review.
The removable closet basket design is another practical point. If the closet layout changes by season, or if the user wants to take a basket out for cleaning or sorting, the basket is designed to be easily removed and reinstalled. That can be useful in family closets, laundry-adjacent storage, mudroom-style wardrobe sections, or garage organization areas where contents change over time. Before purchase, confirm that your side panels and mounting pattern are suitable for a side mount closet basket with a bayonet mounting system configured to the 32 mm system.
When buyers compare closet baskets in general, the important factors are usually material, finish, mounting style, slide quality, removability, and how the basket sits on the slide assembly. This steel closet basket from Rev-A-Shelf gives clear verified details in those areas. It is a steel basket with a chrome finish, built as a side-mounted pull-out unit, and paired with heavy duty ball bearing slides rated at 100 lb.
That combination can help buyers who want a product with defined installation and use characteristics instead of a basic wire bin with limited movement details. The ball bearing slide format is commonly selected when smoother travel is preferred. The removable basket format can also be a better fit for projects that need occasional basket access away from the cabinet or closet opening. Because the basket rests on top of the slides, this product is specifically described as reducing the torque twist found in other designs.
For trade buyers, consistency in mounting matters as much as appearance. The bayonet mounting system configured to the 32 mm system may simplify planning when the closet system already follows that drilling pattern. For replacement buyers, the key comparison point is not just basket size. It is also whether the existing opening, side clearance, and mounting layout align with this Rev-A-Shelf closet basket. If your current hardware uses a different mounting approach or spacing pattern, confirm compatibility before ordering rather than assuming baskets with similar dimensions install the same way.
This Rev-A-Shelf closet basket fits projects that can accept an 18 inch wide, 20 inch deep, 7 inch high side-mounted basket and compatible slide clearance.
This product is a side mount closet basket with ball bearing slides.
This chrome closet basket has a chrome finish over a steel basket design.
The heavy duty closet basket slides are rated at 100 lb according to the verified product data.
The removable closet basket is designed to be easily removed and reinstalled.
This pull out closet basket uses a bayonet mounting system configured to the 32 mm system.
This steel closet basket requires buyers to confirm opening width, interior depth, side mounting layout, and vertical clearance for basket and slide travel.
Included hardware details are not fully verified here, so buyers should confirm the exact contents before ordering.
This Rev-A-Shelf closet basket is intended for closet organization and may also suit similar storage areas if fit and mounting conditions are confirmed.
This closet basket should be installed by following manufacturer installation guidance and local building requirements where applicable.
Chrome closet basket is a practical choice when you need visible storage, pull-out access, and a defined side-mount format for a closet system. This Rev-A-Shelf closet basket includes the verified basket size, steel construction, chrome finish, removable basket design, and 100 lb rated ball bearing slides. Before purchase, confirm your opening dimensions, side panel mounting conditions, 32 mm system compatibility, and the exact included hardware for your install or replacement project.
Sold In: 1 Each
