Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you sliding storage for closet layouts that need better access to folded clothes, accessories, or other stored items. This steel closet basket is a side mount closet basket with a satin nickel finish and an 18 inch closet basket width, 14 inch deep closet basket depth, and 18 inch height. Rev-A-Shelf identifies this product as a pull out closet basket designed for side mounting. The basket uses ball bearing closet basket slides with a bayonet mounting system configured to the 32mm system closet basket standard. The basket is also a removable closet basket, so it can be lifted off and reinstalled when needed. Heavy duty slides are listed as 100 lb rated in the verified product data.
Key specs to confirm: This Rev-A-Shelf closet basket is verified at 18 inches wide, 14 inches deep, and 18 inches high. It is a side mount closet basket with heavy duty ball bearing slides and a bayonet mounting system configured to a 32mm system. Before purchase, confirm your closet opening width, inside depth, side panel condition, and mounting layout. Also confirm whether your project is designed around the 32mm system. The verified product data lists the slides as 100 lb rated. Any additional installation tolerances, hardware details, or other compliance information should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data confirms an individual pack closet basket with side-mount slide system. If you need exact hardware contents or fastener details, those should be confirmed before ordering.
What to verify before ordering: Confirm opening size, side clearance, mounting surface strength, basket height clearance, and whether your closet layout accepts a side-mounted pull-out basket using a 32mm system pattern. Also verify the finish and included hardware details for your install plan.
A pull out closet basket is often chosen when shelves make it hard to reach stored items at the back of a closet. In a reach-in closet, dressing room, or utility storage area, buyers usually want faster access to folded garments, small accessories, or grouped items without unloading a fixed shelf. This Rev-A-Shelf closet basket addresses that need with a side-mounted pull-out format that slides forward for access.
The verified dimensions matter here. An 18 inch closet basket width and 14 inch deep closet basket depth can fit projects where a buyer has a defined opening and wants a basket rather than a drawer box. The 18 inch height also matters for stacked clothing, linens, or taller stored items. Because this is a steel closet basket, it suits users who prefer an open-wire style that lets them see contents quickly.
Installation planning is a major buying concern for this product type. This side mount closet basket uses heavy duty ball bearing closet basket slides with a bayonet mounting system configured to the 32mm system closet basket format. That makes it relevant for closet systems built around line-bored panels or similar system-based layouts. If your panels are not set up for that pattern, confirm adaptation requirements before ordering.
Another practical point is maintenance and handling. Rev-A-Shelf states the baskets are designed to be easily removable and effortlessly reinstalled. That can help when a homeowner wants to carry contents to a folding area, clean around the basket, or reorganize closet sections by season. The verified product data also states that the basket rests on top of the ball bearing slides, and that this design helps eliminate the torque twist inherent in other designs. For buyers who have used baskets that rack or bind when pulled, that design note is worth considering.
The verified slide rating is 100 lb, but buyers should still match actual use to the manufacturer's guidance and installation conditions. If your project has unusual loads, nonstandard panel material, or custom framing, confirm those details before installation.
When buyers compare closet basket options, the main differences usually come down to finish, mounting style, slide type, basket size, and whether the basket can be removed after install. This Rev-A-Shelf closet basket gives you a clear set of verified details in each of those areas. It is a satin nickel closet basket made from steel, built for side mounting, and paired with ball bearing slides.
That matters because not every closet basket is configured the same way. Some baskets may be fixed in place, while this removable closet basket is designed to lift out and go back in. Some baskets use lighter slide systems, while this product is listed with heavy duty ball bearing slides rated at 100 lb. Some baskets may not align with system-based closet construction, while this product is specifically described as using a bayonet mounting system configured to the 32mm system.
The basket-on-top-of-slide design is another point to review. Rev-A-Shelf states that this arrangement helps reduce torque twist that can occur in other designs. For a buyer, that means the product description gives a practical reason for the slide and basket layout beyond simple appearance. It speaks to how the basket behaves during regular pull-out use.
Finish consistency is also part of the buying decision. This unit is verified in satin nickel, which can be important when the basket remains visible in open closet systems. If your project includes matching closet hardware or a coordinated storage layout, confirm the finish against the rest of the installation before ordering. For any exact fastener pack contents, panel drilling requirements, or special installation limits not listed here, review manufacturer documentation first.
This Rev-A-Shelf closet basket is 18 inches wide, but buyers should confirm the required clearances for the side mount slides before ordering.
This closet basket is a side mount design according to the verified product data.
This pull out closet basket is verified at 14 inches deep.
This satin nickel closet basket is verified at 18 inches high.
This Rev-A-Shelf closet basket uses heavy duty ball bearing slides listed as 100 lb rated.
This removable closet basket is designed to be easily removed and reinstalled.
This closet basket uses a bayonet mounting system configured to the 32mm system, so buyers should confirm panel compatibility.
This steel closet basket requires buyers to confirm opening width, inside depth, side mounting surfaces, and hardware details before installation. Follow manufacturer installation guidance and local building requirements where applicable.
Pull out closet basket selection starts with verified size, mounting style, and slide format. This Rev-A-Shelf unit is a steel, satin nickel, side-mount basket sized at 18 inches wide, 14 inches deep, and 18 inches high, with removable basket access and ball bearing slides. Before purchase, confirm your opening dimensions, side clearance, 32mm system compatibility, and the exact included hardware for your install. That helps you match the basket to the closet layout without guessing on fit.
Sold In: 1 Each
