Rev-A-Shelf closet basket gives you pull-out storage for closet layouts that need easier access to folded items, accessories, or daily-use gear. This chrome closet basket is a steel side mount closet basket sized at 30 inches wide, 14 inches deep, and 7 inches high. The Rev-A-Shelf product type is built as a wire closet basket that rests on top of ball bearing slides, a design intended to reduce the torque twist found in other designs. The basket uses heavy duty ball bearing slides with a bayonet mounting system configured to the 32mm system. This pull-out closet basket is also designed to be removable and reinstalled with minimal effort, which helps when cleaning, reconfiguring, or unloading a closet storage basket during installation.
Key specs to confirm: This Rev-A-Shelf side mount closet basket is listed at 30 inches wide, 14 inches deep, and 7 inches high, with a chrome finish and steel construction. Buyers should confirm the clear opening width, interior depth, side panel condition, and mounting positions needed for a side mount installation. The product description also states that the basket uses heavy duty 100 lb rated ball bearing slides and a bayonet mounting system configured to the 32mm system. If your project requires exact clearance, fastener details, or any compliance, safety, or additional load information beyond the verified slide rating, confirm those points with the manufacturer or technical documentation before ordering.
What's included: Verified information confirms an individual pack closet basket with ball bearing slide hardware as part of the pull-out basket system. If you need a detailed parts list or fastener count, that should be confirmed before purchase.
What to verify before ordering: Confirm your opening can accept a 30 inch wide basket, your cabinet or closet depth supports a 14 inch deep basket and slide travel, your installation uses or can adapt to a 32mm system layout, and your side panels can support side mount hardware in the intended location.
A pull-out closet basket is useful when stored items are hard to reach on fixed shelves or when stacked clothing tends to hide smaller items behind the front row. In a primary closet, this type of closet organization basket can help separate folded shirts, workout gear, belts, scarves, or handbags into a dedicated pull-out area. In a utility or garage-adjacent storage zone, a wire closet basket can also help keep supplies visible instead of buried in deep shelving.
This Rev-A-Shelf closet basket is sized for buyers who need a wider basket format at 30 inches, with a 14 inch depth and 7 inch height. The side mount closet basket layout matters for installers because the slides mount at the sides rather than below the basket. The verified bayonet mounting system configured to the 32mm system is also relevant for closet projects that follow common panel drilling patterns. If your closet system does not use that format, confirm mounting compatibility before ordering.
Daily use is also affected by slide performance. The verified heavy duty ball bearing slides are listed as 100 lb rated, which gives buyers a concrete hardware reference from the product data. The basket rests on top of the slides, and the product description states that this feature helps eliminate torque twist that is inherent in other designs. For practical use, that means buyers looking for a removable closet basket can pull the basket out, access contents more directly, and reinstall the basket without changing the whole slide setup.
The chrome finish is another practical factor. A chrome closet basket works well where the basket remains visible in open closet sections and where buyers want a bright metal finish instead of a painted appearance. Since baskets in this line are offered in multiple finishes and depths, buyers should make sure this exact chrome, 14 inch deep version is the right match for the opening they are building out. If you are replacing an older closet storage basket, confirm both the basket dimensions and the mounting pattern rather than relying on finish or brand alone.
When buyers compare closet baskets in general, the most important differences usually come down to basket size, mounting method, slide type, removability, and how the basket behaves under regular pull-out use. This Rev-A-Shelf steel closet basket provides verified details in each of those areas. It is a side mount design, it uses ball bearing slides, it is removable and reinstallable, and it uses a top-of-slide basket position intended to reduce torque twist.
That matters because many ordering mistakes happen when a basket looks similar in a photo but installs differently in the field. A generic wire basket may not match the side clearance, depth, or mounting system required by your closet. A basket can also fit the opening width but still fail to align with existing side holes or expected slide travel. For that reason, this product is best evaluated by the verified dimensions of 30 inches wide, 14 inches deep, and 7 inches high, along with the 32mm system note and the heavy duty slide description.
Another point buyers often compare is serviceability. A removable closet basket can be useful in active closet spaces because the basket can be taken out for cleaning or layout changes. Rev-A-Shelf states that this basket is designed to be easily removable and effortlessly reinstalled. For installers and serious DIY buyers, that feature can save time when closet contents need to be cleared or when multiple baskets are being staged during a larger build.
If your project involves replacing an existing basket, compare the current opening width, interior depth, side mount positions, and slide arrangement to this product before ordering. If your project is a new install, confirm that the side panels and layout can support the specified basket size and mounting approach. Follow manufacturer installation guidance and local building requirements where applicable.
The Rev-A-Shelf closet basket is 30 inches wide, 14 inches deep, and 7 inches high, so buyers should confirm opening width, depth, and side mounting space before ordering.
This closet basket is a side mount closet basket with ball bearing slides.
The product description identifies ball bearing slides as part of the basket system, but buyers should confirm the exact included hardware list before purchase.
This Rev-A-Shelf closet basket has a chrome finish.
The Rev-A-Shelf pull-out closet basket is designed to be easily removable and effortlessly reinstalled.
The product data lists heavy duty ball bearing slides rated at 100 lb.
This side mount closet basket uses a bayonet mounting system configured to the 32mm system.
A replacement wire closet basket should be matched by width, depth, height, side mount layout, and mounting pattern before ordering.
This Rev-A-Shelf closet basket is listed as an individual pack.
This closet basket is a non-electrical storage product. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf closet basket is a practical choice when you need a 30 inch wide, 14 inch deep, 7 inch high pull-out storage basket with a chrome finish and side mount slides. The verified product information covers the basket size, steel construction, removable basket design, and ball bearing slide system. Before purchase, confirm your opening dimensions, side mounting layout, and 32mm system compatibility if that matters in your build. Also confirm the exact included hardware list if your project depends on specific fasteners or replacement parts.
Sold In: 1 Each