Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you pull-out storage for closet systems that need organized access without adding drawers. This chrome closet basket is a side mount closet basket made from steel and sized at 30 in. wide, 16 in. deep, and 11 in. high. Rev-A-Shelf identifies this product as a closet basket with heavy duty ball bearing slides rated for 100 lb. The basket rests on top of the slides, which helps reduce the torque twist found in some other closet basket slides designs. The basket is also designed to be easily removable and reinstalled, which helps when you want to clean, reconfigure, or unload a wire closet basket outside the closet opening.
Key specs to confirm: This Rev-A-Shelf closet storage basket is listed at 30 in. wide, 16 in. deep, and 11 in. high, with a chrome finish and side mount installation. The product data also states that the basket uses heavy duty ball bearing slides rated for 100 lb and a bayonet mounting system configured to the 32 mm system. Before purchase, confirm your closet opening width, inside depth, side panel construction, and mounting pattern. If your project depends on exact slide clearance, extension, or hardware details, those should be confirmed with the manufacturer or technical documentation. Any additional compliance or load-use questions beyond the stated 100 lb slide rating should also be confirmed in technical documentation.
What's included: Product data verifies an individual pack closet basket with side mount slide system. If you need exact hardware contents or mounting fastener details, confirm included components before ordering.
What to verify before ordering: Check that your closet section accepts a 30 in. wide basket, provides at least 16 in. of usable depth, and supports side-mounted closet basket slides. Confirm your system uses or can accept a 32 mm mounting pattern, and verify any needed fasteners, clearances, and installation instructions for your specific closet construction.
A pull out closet basket is often chosen when a buyer wants easier access than a fixed shelf but does not need a full drawer box. In a reach-in closet, pantry-style wardrobe section, or utility storage area, a wire closet basket can help keep folded clothing, accessories, and other loose items visible. The open basket format lets you see contents quickly, while the pull-out action brings stored items closer to the front of the opening.
This Rev-A-Shelf closet basket is built for that type of use. The steel basket measures 30 in. wide, 16 in. deep, and 11 in. high, making it relevant for wider closet sections where a broad storage area is preferred. Because it is a side mount closet basket, buyers should focus on side panel fit and mounting layout before ordering. The product data also identifies a bayonet mounting system configured to the 32 mm system, which matters for installers working within system-based closet construction.
Another practical point is serviceability. Rev-A-Shelf states that the basket is designed to be easily removable and effortlessly reinstalled. That can help if the basket needs to be cleaned, moved to another section, or unloaded outside the closet. The basket also rests on top of the ball bearing slides. According to the product data, this helps eliminate the torque twist that is inherent in other designs. For buyers who have used baskets that rack or bind during movement, that design detail may be important.
The verified slide specification is also useful at the decision stage. The closet basket slides are heavy duty ball bearing type and rated for 100 lb. That gives a confirmed reference point for slide capacity, but buyers should still confirm how the basket will be loaded in real use and whether the surrounding closet structure is suitable for the intended installation. If your project requires exact extension travel, soft-close behavior, or specific mounting hardware details, those items are not stated here and should be checked before purchase.
When buyers compare closet storage basket designs, the main differences usually come down to mounting method, basket stability, finish, and how easy the unit is to remove after installation. A side mount closet basket like this one is useful when the closet layout is already built around side-mounted slides and predictable alignment. That can make planning easier for installers who work with panel systems and repeatable hole spacing.
The Rev-A-Shelf product data gives several practical details that support a straightforward comparison. First, this is a chrome closet basket, so the finish is clear and verified. Second, the basket uses heavy duty ball bearing slides with a stated 100 lb rating. Third, the basket rests on top of the slides to help reduce torque twist. Those points matter when a buyer wants a pull out closet basket that stays aligned and remains easy to handle under normal closet loads.
Another useful comparison point is removability. Some basket systems are harder to take out once installed. Rev-A-Shelf states that this basket is designed to be easily removable and reinstalled, which can simplify cleaning and layout changes. That is especially relevant in closet systems where users rotate seasonal items or need to access the full basket outside the cabinet or closet opening.
For a reliable purchase decision, compare your project requirements against the verified dimensions, finish, side mount format, and 32 mm bayonet mounting configuration. If your application depends on exact clearances, hardware pack contents, or other installation details not listed in the product data, confirm those items before placing the order.
This Rev-A-Shelf closet basket is listed at 30 in. wide, 16 in. deep, and 11 in. high.
This closet basket is a side mount design, so buyers should confirm side panel fit and mounting space before ordering.
This pull out closet basket has a chrome finish according to the verified product data.
This closet basket uses heavy duty ball bearing slides with a verified 100 lb rating.
This Rev-A-Shelf closet basket uses a bayonet mounting system configured to the 32 mm system.
This Rev-A-Shelf closet basket is designed to be easily removable and reinstalled.
This closet basket rests on top of the ball bearing slides to help reduce torque twist.
This 30 inch closet basket requires buyers to confirm opening width, usable depth, side mounting space, and 32 mm system compatibility.
Included fastener details are not verified here, so hardware contents should be confirmed before ordering.
This closet basket should be installed by following manufacturer installation guidance and local building requirements where applicable.
Chrome closet basket buyers should confirm dimensions, side-mount fit, and mounting pattern before purchase. This Rev-A-Shelf unit is a steel closet basket sized 30 in. wide, 16 in. deep, and 11 in. high, with heavy duty ball bearing slides rated for 100 lb and a basket design that can be removed and reinstalled. Before ordering, verify your closet opening, 32 mm system compatibility, and any included hardware details needed for your specific installation so the basket matches your project without delays.
Sold In: 1 Each
