Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blythe 3 in pull is a satin nickel cabinet pull built for a 3 in (76 mm) center-to-center drilling pattern, so it lines up with standard cabinet hole spacing for straightforward replacements. The pull length of 3-5/8 in (92 mm) gives a little extra grip area beyond the mounting centers, which helps when drawers are loaded and need a solid handhold. A projection of 1-1/4 in (32 mm) spaces the hand away from the cabinet face, reducing knuckle contact on face frames or thicker drawer fronts. The 1/2 in (13 mm) width creates a slim profile that still gives enough edge to grab without feeling bulky on smaller fronts. A base diameter of 5/8 in (16 mm) seats each end securely against the surface, which supports a stable feel when the pull is tightened down. The satin nickel finish offers a muted metallic look that suits traditional or transitional cabinet runs.
This Amerock Blythe satin nickel pull uses a 3 in (76 mm) center-to-center hole spacing, so layout is based on that fixed distance between mounting points. The 5/8 in (16 mm) base diameter at each end covers typical drilled holes cleanly, which helps hide minor drilling chatter around the bore. With a projection of 1-1/4 in (32 mm), the pull stands off the face enough to clear common door and drawer front thicknesses. The 3-5/8 in (92 mm) overall length informs where to place the drilling template on narrower fronts so the ends sit comfortably inside rail edges. A width of 1/2 in (13 mm) keeps the footprint slim, which is useful on doors with narrow stiles where larger pulls could crowd into panel profiles.
This Amerock Blythe 3 in pull belongs to the Blythe Collection, defined by a ribbed barrel center and decorative accents that suit traditional cabinetry. That style pairs well with framed kitchen cabinets, bath vanities, and built-ins where a classic profile is preferred over minimalist hardware. The satin nickel finish supports projects using other satin nickel components, creating a consistent metal tone on hinges and pulls across the run. With a 3 in (76 mm) center-to-center size, the pull fits cabinets laid out around that standard drilling, which is common in both production and custom shops. The 3-5/8 in (92 mm) length makes it appropriate for upper doors, lower doors, and many drawer fronts that do not require oversized handles.
The 3 in (76 mm) center-to-center spacing on this Amerock BP55222G10 pull simplifies repeating layout across multiple doors and drawers because installers can work from a single measurement. The 5/8 in (16 mm) base diameter gives a defined land for the ends, which helps align pulls square to edges when using jigs or shop-built templates. A projection of 1-1/4 in (32 mm) offers adequate finger space even when doors sit near adjacent panels, supporting smooth operation along tight cabinet runs. The 1/2 in (13 mm) width keeps the grip comfortable while limiting visual bulk, so rows of pulls stay visually aligned without crowding decorative door profiles. Because the pull body is zinc die-cast, the solid construction supports repeated opening and closing cycles typical in kitchens, workrooms, and similar cabinet-heavy spaces.
The Amerock Blythe 3 in pull, with its ribbed barrel and decorative accents, suits traditional and transitional cabinet doors and drawers in kitchens, baths, and built-ins.
The Amerock BP55222G10 pull has mounting holes spaced 3 in (76 mm) apart, setting the drilling distance installers follow when laying out doors and drawers.
The Amerock Blythe satin nickel pull projects 1-1/4 in (32 mm) from the cabinet face, creating finger clearance and reducing knuckle contact when opening doors and drawers.
The Amerock BP55222G10 pull measures 3-5/8 in (92 mm) overall, giving extra grip area beyond the 3 in centers while staying proportional on most cabinet fronts.
The Amerock Blythe cabinet pull is made from zinc die-cast material, providing a metal body suited to regular cabinet door and drawer use.
The Amerock Blythe satin nickel pull has a 5/8 in (16 mm) base diameter, helping each end cover the drilled hole area for a clean finished look.
The Amerock Blythe 3 in pull combines a 3 in (76 mm) center-to-center pattern, 3-5/8 in (92 mm) overall length, and 1-1/4 in (32 mm) projection to work efficiently across many cabinet layouts. Its ribbed barrel center with decorative accents supports traditional styling, while the satin nickel finish coordinates with other satin nickel hardware in the same room. With zinc die-cast construction, the pull is built for routine cabinet door and drawer use. For projects using 3 in drilling and a traditional look, this Amerock BP55222G10 pull is a practical match to standard cabinet dimensions.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AMBP55222-WN Mfr# BP55222WN | Amerock Blythe 3" (76 mm) Center to Center Weathered Nickel Pull, BP55222WN |
Sold In: 1 Each
