Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Highland Ridge pull 160mm center to center describes a cabinet or drawer pull from Amerock Corporation that uses a 6-5/16 inch (160 mm) center-to-center hole spacing, so it works where that specific bore pattern is already drilled. The pull is part of the Highland Ridge collection, which is described as high-end glam meeting down-to-earth farmhouse approachability, giving cabinets a look that bridges traditional and more casual projects. The pull length of 8-9/16 inches creates a longer handgrip along the drawer or door face, which helps when operating wider or heavier fronts. A projection of 1-5/16 inches sets the hand clearance off the surface, which supports a comfortable grip without fingers rubbing the face. The width of 11/16 inches defines the front profile, which affects how the pull lines up visually across multiple doors.
The Amerock Highland Ridge cabinet pull uses a 6-5/16 inch (160 mm) center-to-center measurement, so it lines up with pre-drilled holes using that spacing on doors or drawers. The pull is 8-9/16 inches long, which means it extends beyond the hole centers for added leverage, helpful on tall doors or wide drawers. A projection of 1-5/16 inches pulls the grip away from the cabinet surface, keeping knuckles off the finish during regular use. With a width of 11/16 inches, the pull sits with a balanced front profile that does not overpower narrower rails while still reading clearly on larger faces. The zinc die-cast material gives the installer a rigid, stable part to mount, which supports a consistent reveal across a run of cabinets.
The Highland Ridge handle for cabinets sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it is aimed at cabinet and furniture door and drawer applications rather than structural fastening. The 6-5/16 inch (160 mm) center-to-center dimension places it in a size class commonly used on kitchen and bath cabinetry, which helps with planning bank layouts that mix doors and drawers. Its 8-9/16 inch overall length makes it suitable for mid to large drawer fronts where a longer grip feels more appropriate than a small knob. The Antique Pewter finish gives the pull a subdued metallic appearance, so it coordinates well with both brushed and darker metal tones already in the room. The Highland Ridge collection styling, described as high-end glam meeting down-to-earth farmhouse approachability, supports projects aiming for a blend of refined and casual design.
The Amerock Highland Ridge Series 6-5/16 in (160 mm) center-to-center Antique Pewter pull, BP55321AP, carries a specific manufacturer part number that helps match pulls across phases or repeat jobs without variation. The zinc die-cast material allows for precise shaping of the handle profile, which keeps edges, curves, and grip surfaces consistent from piece to piece along a full run. A projection of 1-5/16 inches keeps each pull sitting off the face the same distance, which helps doors and drawers clear fingers in high-use areas like kitchens. The 11/16 inch width stays uniform across all units, so sightlines along upper and lower cabinets remain straight and even. The Antique Pewter finish is applied to the zinc die-cast base, giving a unified color tone that ties together multiple cabinets in a room and simplifies matching replacement parts later.
The BP55321AP pull has a 6-5/16 inch (160 mm) center-to-center, an 8-9/16 inch overall length, a 1-5/16 inch projection, and an 11/16 inch width, guiding layout and drilling.
The Amerock Highland Ridge pull is zinc die-cast, providing a metal construction that supports consistent shaping and a solid feel on cabinet doors and drawers.
The pull uses an Antique Pewter finish, giving a muted metallic look that coordinates with many hinge, faucet, and appliance tones in cabinet projects.
The 6-5/16 inch (160 mm) center-to-center measurement matches a common drilling pattern, simplifying alignment across several doors and drawers.
The 1-5/16 inch projection sets the pull away from the cabinet face, giving fingers space behind the handle for a comfortable grip during daily use.
The Highland Ridge collection is described as high-end glam meeting down-to-earth farmhouse approachability, supporting designs that blend refined and relaxed cabinetry.
The Amerock Highland Ridge Series 6-5/16 in (160 mm) center-to-center Antique Pewter pull, BP55321AP, matches cabinet and drawer layouts built on that drilling pattern, so it fits projects using 160 mm spacing. Its 8-9/16 inch length, 1-5/16 inch projection, and 11/16 inch width work together to create a comfortable grip that suits everyday kitchen, bath, or built-in use. The zinc die-cast construction and Antique Pewter finish align with the Highland Ridge visual theme, supporting jobs that target a blend of polished and farmhouse-inspired cabinetry. For projects calling for a decorative handle in this size and finish, this pull aligns dimensions, material, and style in a single part number.
Sold In: 1 Each
