Amerock Highland Ridge Series Satin Nickel 12" (305 mm) Center to Center Appliance Pull, -BP55323G10
Description
Highland Ridge Appliance Pull For Large Fronts
Highland Ridge appliance pull gives a 12 inch center-to-center grip that spans wider appliance or cabinet fronts, helping align multiple doors so sightlines stay consistent across a run. The Amerock Highland Ridge Series Satin Nickel 12 inch (305 mm) Center to Center Appliance Pull, BP55323G10, uses a substantial appliance-pull format, so one piece can visually anchor taller panels and balance the scale of built-in units. The pull is part of Amerock's Highland Ridge collection, which ties it to a broader family of decorative hardware, helping projects carry the same profile from appliances through doors and drawers. Its satin nickel finish sits in the middle of the sheen range, so fingerprints read less and the pull blends easily with common stainless and brushed fixtures in a shop or residential setting.
Key Highland Ridge Appliance Pull Details
- The 12 inch center-to-center drilling spaces mounting points to match standard appliance-pull layouts, simplifying layout when aligning with existing or planned 12 inch boring patterns on doors or panels.
- The overall length of 15-5/16 inches extends past the mounting centers, giving generous hand clearance along the bar, which helps users grab the pull comfortably on tall appliance or pantry fronts.
- The 1-13/16 inch projection creates stand-off from the face, so fingers clear door profiles more easily, which supports smoother operation on thicker appliance panels or applied moldings.
- The 1 inch width provides a stable bar profile, giving the pull a solid feel in the hand and offering visual weight that suits full-height cabinet and appliance doors.
- The zinc material forms the body of the pull, allowing a detailed Highland Ridge profile while keeping weight manageable when installing multiple pulls across a large kitchen or project run.
- The satin nickel finish coats the zinc substrate, giving a neutral metallic look that coordinates with many hinges and fixtures, helping hardware selections stay consistent across the space.
Installation Geometry And Mounting Dimensions
The 12 inch center-to-center dimension drives drilling for this Amerock BP55323G10 pull, so hole layout can follow a straightforward 12 inch spread for both new work and replacements. The base dimensions of 2-7/16 inches by 1 inch define the footprint at each mounting point, which helps with planning around edge profiles, rail widths, or any existing marks that need to be concealed. A projection of 1-13/16 inches sets the pull off the face enough to clear most door styles while staying tight to the panel, which keeps the handle from feeling over-proud on appliance fronts. The listed 1 inch width gives a consistent bar thickness, so once one pull is positioned correctly, the rest of the line will visually match without further fine-tuning.
Using This Amerock Pull In Real Projects
Where The Highland Ridge Pull Works Best
This Amerock Highland Ridge Series Satin Nickel 12 inch center to center appliance pull sits in the appliance pull class, so it is sized for tall doors and panel-ready appliances where a shorter cabinet pull would look underscaled. The 15-5/16 inch overall length spans more of the door height or width, helping large fronts look proportionate when viewed across a kitchen or millwork wall. With base dimensions of 2-7/16 inches by 1 inch, each mounting pad covers a meaningful area around the screw holes, which can help visually mask prior bore marks when swapping from another 12 inch center-to-center handle. The satin nickel finish ties visually to many stainless and brushed fixtures, supporting projects where oven doors, refrigerators, and tall pantry fronts need hardware that reads as part of one coordinated set.
The 1-13/16 inch projection gives the Highland Ridge appliance pull enough stand-off to clear door frames and molding details on appliance panels or tall cabinets. That spacing supports full-hand gripping, which is especially helpful on heavy panels that see frequent use. The 1 inch width complements that projection to create a comfortable gripping surface, so users can pull straight without fingers crowding the door edge. Working in zinc allows Amerock to shape the Highland Ridge profile with consistent detail from pull to pull, which matters when several handles line up on a long bank of cabinets or appliances.
Details That Support Consistent Installation Results
The defined 12 inch center-to-center measurement on the BP55323G10 sets a clear drilling reference for jigs and templates, which helps installers repeat the same layout on every door or appliance panel without recalculating spacing. Knowing the bar length is 15-5/16 inches lets layouts center the pull accurately on wide fronts, preventing drift that would show when multiple tall panels stand side by side. The 2-7/16 inch by 1 inch base dimensions at each end of the pull indicate how much flat surface is required for solid seating, guiding rail and stile design so the pull sits fully supported on wood, laminate, or other face materials.
The Highland Ridge appliance pull ships with 8-32 x 1-1/4 inch screws, which match common cabinet and appliance panel thread standards, so threading engagement is predictable once hole depth is drilled appropriately. Using those 8-32 x 1-1/4 inch fasteners allows the installer to drive the pull tight to the door face while keeping threads fully engaged in the mounting posts, supporting a secure connection on thicker fronts. Across a job, these fixed dimensions and fastening details let installers set up drilling patterns and workflows around one consistent hardware spec, reducing layout variation and supporting cleaner lines on finished work.
Common Questions About The BP55323G10 Pull
What center-to-center size is the BP55323G10 pull?
The Amerock BP55323G10 Highland Ridge appliance pull has a 12 inch center-to-center dimension, which matches common appliance-pull drilling patterns for tall doors and panel-ready units.
How long is the Amerock Highland Ridge appliance pull overall?
The Highland Ridge satin nickel appliance pull measures 15-5/16 inches in overall length, so it visually fits larger cabinet fronts and appliance panels without looking undersized.
What material and finish does this Highland Ridge pull use?
The BP55323G10 pull is made from zinc with a satin nickel finish, giving a metallic look that coordinates well with many contemporary hinges and appliance surfaces.
How far does the BP55323G10 pull project from the door face?
This Amerock Highland Ridge appliance pull projects 1-13/16 inches from the mounting surface, providing finger clearance that supports comfortable gripping on tall, heavy doors.
What are the base dimensions of each mounting pad?
Each base on the BP55323G10 measures 2-7/16 inches by 1 inch, giving a defined footprint that can help cover existing bore areas during hardware changes.
What screw size is specified for this Amerock appliance pull?
The Highland Ridge 12 inch center-to-center appliance pull uses 8-32 x 1-1/4 inch screws, matching a common cabinet hardware thread standard for secure mounting.
Choose This Pull For 12 Inch Appliance Layouts
The Amerock Highland Ridge Series Satin Nickel 12 inch center to center appliance pull BP55323G10 combines a defined 12 inch drilling dimension, a 15-5/16 inch overall length, and a 1-13/16 inch projection to suit tall doors and panel-ready appliances. Its zinc construction with satin nickel finish, 1 inch width, and 2-7/16 inch by 1 inch bases support consistent alignment and a coordinated look across a full run of fronts. For projects calling for a Highland Ridge profile at appliance-pull scale, this model provides the key measurements and finish needed for layout, boring, and final appearance.
