Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Connections pull 96mm center to center identifies this Berenson Corporation Connections Series cabinet pull as a 3-3/4 inch center-to-center option, which matches common drilling patterns and helps streamline layout on doors and drawers. The zinc die cast material provides a solid metal body, supporting everyday cabinet use in kitchens, baths, or shop-built casework. A vintage nickel finish gives the pull a muted metallic look, pairing well with many hinge finishes and face frame or frameless cabinet styles. The 4-5/16 inch overall length offers a bit of grip beyond the 3-3/4 inch mounting span, which helps with larger or heavier fronts. A 1/2 inch width creates a narrow profile across the rail or stile, which keeps the hardware visually light while still giving fingers a defined edge to pull against.
The Connections Series 3-3/4 inch center-to-center pull uses two mounting points set 96 mm apart, which suits standard cabinet pull drilling patterns commonly used in shop jigs and CNC programs. With a 1-1/8 inch projection, the pull stands off the door or drawer just enough to clear typical finger thickness, which helps users get a full grip without their knuckles contacting the front surface. The 3/8 inch base diameter provides a compact footprint at each contact point, so the pull nests cleanly on narrow rails or stile edges without crowding adjacent profiles. A 1/2 inch bar width runs between the bases, keeping the pull slim while still offering a defined edge that feels stable when opening heavier fronts.
The Berenson Connections Series pull with 3-3/4 inch (96 mm) center to center spacing fits cabinet doors and drawers laid out on the widely used 96 mm hole pattern, which is common in both frameless and face frame cabinetry. The 4-5/16 inch overall length helps this pull look proportionate on medium-width drawer fronts and standard upper or base doors, keeping hardware visually balanced across the run. A vintage nickel finish lets the pull sit comfortably in traditional, transitional, or simple contemporary designs, aligning with other nickel decorative hardware and hinges on the project. The zinc die cast material provides a solid-feeling handle for everyday residential cabinetry or light commercial casework, supporting repeated opening and closing without feeling flimsy in hand.
The 96 mm center-to-center dimension on the Connections pull is precise, which supports accurate repeat drilling when using templates or line boring equipment across an entire kitchen or bank of built-ins. A 1-1/8 inch projection is carefully sized so the pull clears typical door and drawer front thicknesses, giving enough gap for fingers while helping fronts stack neatly in tight reveals. The 3/8 inch base diameter keeps each mounting point compact, which reduces interference with narrow frame members or profiled edges, helping maintain clean sightlines. The 1/2 inch width offers a slim grip that still feels positive, which can help users get a solid pull on heavier drawers without needing a bulky handle. The zinc die cast construction allows each pull in the 4130-1VTN-P part number to maintain consistent dimensions, which supports straight visual lines when multiple pulls are aligned across wide drawer banks or tall pantry runs.
The Connections Series pull has a 3-3/4 inch, or 96 mm, center-to-center size, which matches a common cabinet drilling pattern and simplifies layout across multiple fronts.
The Berenson Connections pull measures 4-5/16 inches in overall length, giving a bit of bar length beyond the 3-3/4 inch mounting span for additional grip.
This vintage nickel cabinet pull has a 1-1/8 inch projection, creating enough space between the pull and door face for comfortable finger clearance.
The 4130-1VTN-P Connections pull is zinc die cast, providing a molded metal body with uniform sizing across multiple pulls on the same project.
This Berenson Connections cabinet pull has a vintage nickel finish, giving it a soft metallic appearance that pairs well with other nickel-finished hardware.
Each base on this pull has a 3/8 inch diameter, and the grip section is 1/2 inch wide, creating a compact footprint with a slim yet secure handle.
The Berenson Connections Series 3-3/4 inch (96 mm) center-to-center vintage nickel pull brings a zinc die cast body, 4-5/16 inch overall length, and 1-1/8 inch projection together in a practical cabinet handle. These dimensions suit standard 96 mm drilling on doors and drawers, while the 1/2 inch width and 3/8 inch base diameter keep the hardware visually clean on a range of front styles. When a project calls for a vintage nickel finish with consistent sizing under the 4130-1VTN-P part number, this pull offers a straightforward option for aligning looks and layout.
Sold In: 1 Each
