Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Connections pull 96mm center to center describes a Berenson Corporation cabinet pull from the Connections collection that spans 3-3/4 inches between screw holes, giving cabinet doors and drawers a defined hand grip point that matches common drilling patterns in many shop layouts. The pull is made from zinc die cast material, which provides a consistent, molded form that supports repeatable alignment from piece to piece on a run of cabinets. Its Verona Bronze finish establishes a warm, dark tone on the hardware surface that sets a clear visual contrast against many painted or lighter wood fronts. The overall length of 4-5/16 inches means the pull extends beyond the fastener centers at both ends, so it covers the drilling area cleanly when used on new work or replacements. A projection of 1-1/8 inches stands the grip off the face enough for fingers to hook behind it without crowding the door or drawer panel.
This Berenson Connections series pull uses a 3-3/4 inch, or 96 mm, center to center spacing, so its mounting points line up with that standard drilling distance when laying out doors and drawers. The pull length of 4-5/16 inches gives a small reveal beyond each fastener location, which helps it sit visually centered over the bored holes and conceal the interface between panel and hardware. A projection of 1-1/8 inches establishes the stand-off from the face, defining how far the hand sits from the cabinet surface during operation. The grip width of 1/2 inch defines the front profile, offering enough edge for fingers while keeping the hardware scale suitable for smaller cabinetry. Base diameters of 3/8 inch set a compact footprint against the panel, which matters when aligning multiple pulls along narrow rails.
The Berenson Connections series pull in Verona Bronze finish is designed for cabinet doors and drawers that match its 3-3/4 inch, or 96 mm, center to center mounting. That hole spacing defines where the pull lands on the panel and aligns with many cabinet drilling patterns used in shops and on site. The 4-5/16 inch overall length allows the pull to sit slightly beyond the boring points, which frames the grip area and keeps the ends clear of the screw locations during layout. A width of 1/2 inch keeps the pull visually light, making it suitable for face frames, frameless fronts, or utility cabinets where a slim profile is desired. The Verona Bronze finish provides a bronze-colored surface that coordinates with other Verona Bronze pieces within the same design language, helping a run of cabinets read as a single, planned system. With base diameters of 3/8 inch, the contact points stay compact, so the pull seats neatly on narrower stiles or drawer rails without crowding adjacent details.
The defined 96 mm, or 3-3/4 inch, center to center measurement on this pull directly guides drilling jigs or CNC programs, which supports fast, repeatable hole placement across a job. Its zinc die cast construction means the body is formed in a mold, producing consistent dimensions that help align multiple pulls in straight visual lines along banks of doors and drawers. A projection of 1-1/8 inches fixes the clearance between the cabinet face and the gripping surface, which impacts how doors swing past frames and adjacent units once installed. The 4-5/16 inch total length can be factored into layouts where pulls must clear edges, neighboring hardware, or decorative trim, reducing layout conflicts on tight fronts. The 1/2 inch width and 3/8 inch base diameter also define how much flat surface is needed for proper seating, which matters when hardware is positioned close to routed profiles or panel edges on custom work.
The Berenson Connections pull has a 3-3/4 inch, or 96 mm, center to center distance, which sets the drilling pattern for cabinet doors and drawers using this hardware.
The Berenson 4132-10VB-P pull has an overall length of 4-5/16 inches, so it extends slightly beyond the mounting holes for a framed look on the cabinet face.
The Verona Bronze cabinet pull is made from zinc die cast material, giving it a molded form that helps maintain consistent sizing across multiple pieces in a project.
This cabinet pull has a projection of 1-1/8 inches, which defines the clearance space for your hand between the hardware and cabinet face.
The pull has a width of 1/2 inch and a base diameter of 3/8 inch, so it presents a slim profile and a compact footprint on cabinet rails and stiles.
The Verona Bronze finish gives the pull a bronze-colored surface that visually coordinates with other Verona Bronze hardware on cabinets in the same space.
The Berenson Connections pull 96mm center to center with Verona Bronze finish gives you a defined 3-3/4 inch mounting span, a 4-5/16 inch overall length, and a 1-1/8 inch projection, so it slots naturally into cabinet layouts built around that hole spacing. Its zinc die cast construction, 1/2 inch width, and 3/8 inch base diameter provide a consistent, compact profile suited to doors and drawers across a run of work. For projects calling for Verona Bronze hardware in this size class, this pull aligns form, finish, and mounting dimensions in a single part.
Sold In: 1 Each
