Choose a Rev-A-Shelf drawer divider

Rev-A-Shelf maple drawer divider is a solid maple divider blank made for drawer organization projects that need a clean wood match with other Rev-A-Shelf drawer insert products. This Rev-A-Shelf drawer insert is 22 inches deep, 1/2 inch thick, and 2-3/8 inches high in the shallow format. The piece has a UV cured clear finish and is sold each. Buyers searching for RS4WD-22SH-1, a revashelf drawer divider, or a rev a shelf drawer insert are usually trying to match an existing wood insert layout or build a custom divider arrangement. This wood drawer divider gives you a verified material, depth, and height to work from before you cut, fit, or pair it with other maple insert components.

Use this maple drawer divider well

• Solid maple construction - The Rev-A-Shelf wood drawer divider provides a consistent wood material for drawer insert builds and matching maple storage layouts.
• 1/2 inch thickness - The maple drawer divider uses a defined thickness that helps buyers plan groove size, spacing, and fit with adjoining insert parts.
• 22 inch depth - The Rev-A-Shelf drawer divider is sized for drawers or insert layouts that need a full 22 inch deep component.
• 2-3/8 inch shallow height - This drawer insert blank works where a lower divider profile is preferred inside shallower drawer organization setups.
• UV cured clear finish - The Rev-A-Shelf maple drawer divider arrives with a clear finished surface that is ready to match other finished wood insert products.
• Designed to work with other Rev-A-Shelf wood drawer insert products - Buyers can use this piece when building or extending a coordinated drawer insert arrangement.
• Sold as each - The single-piece pack format helps when replacing one divider or ordering only the quantity needed for a custom drawer layout.
• Drawer insert blank format - The blank style gives installers and serious DIY buyers flexibility when planning custom spacing inside kitchen or bath drawers.

Confirm maple drawer divider fit

Key specs to confirm: This maple drawer divider is a Rev-A-Shelf wood drawer insert blank made from 1/2 inch thick solid maple with a 22 inch depth and a 2-3/8 inch shallow height. Before ordering, confirm your drawer interior depth, the divider height you want, and whether your layout is designed around shallow or deep insert components. If you are matching an existing insert system, confirm that the finish, material, and profile align with your current Rev-A-Shelf pieces. Load limits, compliance details, and any application-specific installation requirements are not provided in the verified product data and should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf maple drawer divider blank with UV cured clear finish. The verified pack quantity is each.

What to verify before ordering: Check drawer inside depth, required divider height, quantity needed, compatibility with other wood insert parts, and whether your project calls for trimming, slotting, or other custom fitting steps.

Compare wood drawer divider options

Use a wood drawer divider effectively

A wood drawer divider like this is usually selected by buyers who already know the drawer size they are working with and need a maple insert component that matches other wood organizers. In a kitchen drawer, that often means creating separated spaces for utensils, wraps, or tools. In a bath drawer, it can mean dividing grooming items or accessories into cleaner sections. Because this product is a drawer insert blank, it fits projects where the buyer wants more control over layout than a fixed insert provides.

The verified product data gives several practical points that matter during planning. This Rev-A-Shelf drawer divider is made from solid maple, measures 22 inches deep, is 1/2 inch thick, and has a 2-3/8 inch shallow height. Those dimensions help you decide whether it will fit the drawer front-to-back, whether the divider height clears the items stored inside, and whether the piece matches the spacing or slot size in your existing organizer. Buyers looking for a maple drawer insert blank or RS4WD-22SH-1 are often trying to avoid a mismatch in material or finish when adding onto a current setup.

The UV cured clear finish is also useful in real projects because it means the visible wood surface is already finished to coordinate with other Rev-A-Shelf wood drawer insert products. If you are replacing one divider in a larger organizer, that can reduce the risk of mixing unfinished and finished pieces. If you are building a custom arrangement from scratch, the blank format gives you more freedom to create the drawer zones you want. For any project that depends on exact slot width, trim allowance, or joinery method, confirm those details in your insert design before ordering, since the verified data does not provide machining or installation hardware information.

Compare a maple drawer divider confidently

When comparing drawer divider options, buyers usually focus on material, finish, size, and whether the part is meant to integrate with a broader insert system. This Rev-A-Shelf drawer divider gives you clear verified information in those areas. The material is solid maple, the finish is UV cured clear, and the format is a drawer insert blank designed to match and work with other Rev-A-Shelf wood drawer insert products. That makes it easier to evaluate than generic divider pieces that may not state finish type or intended product family.

Another useful point is dimensional clarity. This piece is listed at 1/2 inch wide, 22 inches deep, and 2-3/8 inches high. For a buyer comparing a shallow divider to a taller one, the verified shallow height helps narrow the choice based on drawer contents and available vertical space. The sold-each pack style also matters for planning because it supports replacement orders and custom quantity purchases without assuming a full kit.

If you are reviewing several wood drawer divider choices, compare them against your drawer interior measurements first, then against your existing organizer material and finish. A maple drawer divider is often chosen because it keeps a wood insert layout visually consistent. A Rev-A-Shelf drawer insert blank is especially relevant if you are already using other Rev-A-Shelf wood components and want a coordinated fit across the drawer. For any detail not listed here, such as trimming guidance or exact compatibility with a specific insert configuration, confirm with manufacturer documentation before purchase.

Ask fit questions before ordering

Order the right drawer insert

Rev-A-Shelf maple drawer divider is a practical choice when you need a verified solid maple blank that matches other Rev-A-Shelf wood drawer insert products. Before purchase, confirm your drawer interior depth, the shallow 2-3/8 inch height requirement, and the quantity needed because this item is sold each. Included content is limited to the verified divider blank with UV cured clear finish. If your project depends on exact slotting, trimming, or hardware, review the manufacturer documentation first so the drawer insert fits your layout without rework.