Knape and Vogt PDMTM 15" Birch 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, PDMTM15-2-35WH

Knape And Vogt PDMTM 15 Inch Birch Waste Pullout

Knape and Vogt PDMTM 15 inch birch waste pullout is a top-mount trash pull-out designed for door mount applications, so it turns a cabinet opening into a smooth, front-acting waste station. The unit belongs to the KV PDMTM Series, which is described as KVs most affordable line of top mount trash pull-outs, giving shops a cost-conscious option when planning multiple kitchens or bath installs. The platform is made of multiply birch veneer, which creates a stable base for the waste bins and handles everyday use in a kitchen or bath cabinet. Soft radius edges on the platform improve safety when loading or cleaning around the unit, which is useful during installation and later service. The system is configured for two 35 quart white plastic waste bins, which supports common trash and recycling setups inside a standard cabinet opening.

Key PDMTM15-2-35WH Details For Cabinet Builders

• The top mount trash pull-out design fastens to the cabinet interior, which stabilizes the assembly and keeps the slides aligned during long-term use.
• Door mount application means the cabinet door connects directly to the pull-out, creating a one-motion open-and-extend action that speeds daily use.
• KV heavy duty precision ball bearing slides are rated at 100 lb, so the pull-out supports the weight of two 35 quart bins and typical waste loads without overtaxing the slide system.
• The multiply birch veneer platform offers a flat, consistent base for mounting and supports accurate positioning of the door brackets for clean reveals.
• Soft radius edges on the platform reduce sharp corners inside the cabinet, which helps during installation and when reaching around the unit for cleaning.
• Waste bins are specified as white plastic, giving a neutral, clean look that coordinates with most kitchen and bath cabinet interiors.

Top-Mount And Door-Mount Installation Function

This PDMTM15-2-35WH top mount trash pullout uses a platform that mounts to the cabinet top or interior framing, so the slide hardware references a solid surface and stays square in operation. The slides are KV heavy duty precision ball bearing slides rated at 100 lb, which supports full-extension use under typical container loads. Door mount brackets are part of the design and provide 6-way adjustment, giving flexibility to move the door in and out, up and down, and side to side for final alignment. That 6-way adjustability helps installers fine-tune door gaps and face alignment to neighboring fronts, especially in frameless or tight inset layouts. The unit is built for door mount applications, so the door attaches directly to the pull-out, resulting in a single pull action for accessing the two 35 quart white plastic bins.

Using This Top Mount Double 35 Quart Pull-Out

Where This KV PDMTM Series Pullout Works Best

This KV PDMTM series top mount waste pullout is categorized under Kitchen & Bath Cabinet Accessories and Trash Pull-Outs, so it is aimed at cabinets that need integrated waste management rather than a freestanding can. The product is part of the Top Mount Trash Pullouts class, which suits installers building face frame or frameless cabinets that accept a platform on the cabinet interior. The PDMTM15-2-35WH model uses two 35 quart white plastic waste bins, making it suitable wherever separate trash and recycling or multi-stream sorting is required inside a single cabinet space. The multiply birch veneer platform presents well in cabinet interiors that use wood-based construction, and its soft radius edges complement higher-end interiors by limiting harsh lines around the pull-out section. Because the line is described as KVs most affordable top mount trash pull-out family, shops planning larger runs or multi-unit projects can specify this series when balancing cost, capacity, and ball bearing slide performance.

Details That Support Repeatable Alignment And Use

The PDMTM15-2-35WH top mount double white 35 quart trash pull-out is built on KV heavy duty precision ball bearing slides rated at 100 lb, so repeated opening and closing under normal load remains smooth over time. The top-mount platform anchors the slide set to the cabinet structure, which reduces racking and improves tracking when users pull from one side of the handle. With the platform in multiply birch veneer, cabinetmakers work with a material that behaves predictably when fastening and setting door mount hardware, supporting consistent results across multiple units. Soft radius edges on the platform reduce the chance of catching hands or cleaning cloths, which is helpful in tight cabinet wells. Door mount brackets are defined as offering 6-way adjustment, so installers can dial in reveals and parallelism between this pull-out front and surrounding doors or drawers without re-drilling. Replacement bins are sold separately, which allows future bin swaps while keeping the mounted slide and platform structure in place for continuity across service cycles.

Common PDMTM15-2-35WH Waste Pullout Questions

Selecting This KV PDMTM Waste Pullout For Your Job

The PDMTM15-2-35WH top mount double white 35 quart trash pull-out combines a multiply birch veneer platform, dual 35 quart white plastic bins, and KV heavy duty precision ball bearing slides rated at 100 lb, giving cabinet builders a practical, integrated waste solution. Door mount brackets with 6-way adjustment support precise front alignment in door mount applications. For kitchen and bath cabinet projects that call for a KV PDMTM series top mount waste pullout, this model offers a defined capacity and mounting style that fit into standard cabinet planning and repeatable shop workflows.