Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Knape and Vogt PDMTM Series pullout installs in an 18-inch base cabinet and holds two 35-quart white bins side by side, keeping a dual-stream waste and recycling setup tucked behind a cabinet door.
The top-mount configuration puts the slide mechanism above the bin pair rather than underneath, so the carriage opens from the top and the bins hang below the slide rail. This arrangement works especially well in a base cabinet with a fixed or very low shelf, since there is no hardware running along the cabinet floor to interfere with plumbing or blocking. With two 35-quart bins side by side in an 18-inch opening, one bin handles kitchen waste and the other handles recycling, and both roll out together when the door swings open. A door-mount bracket connects the carriage to the cabinet door so the pull is in one motion, without a separate handle.
The carriage is birch, a light, stable wood substrate that anchors the slide hardware and holds the bins in position without adding unnecessary weight. The two bins are white plastic, sized at 35 quarts each. Standard slides manage the travel, rated to carry 100 pounds across the loaded unit. The bins lift out of the carriage for emptying or cleaning, and the carriage stays mounted to the cabinet. Dimensions are 18 inches wide, 17-1/2 inches tall, and 22-1/2 inches deep, matching the minimum cabinet opening this unit requires.
This is the right choice for a kitchen renovation or cabinet shop installation where an 18-inch base cabinet is earmarked for waste and recycling and the top-mount configuration is a better fit than a bottom-mount unit. Designers specifying dual-stream waste management in a standard-depth kitchen run will find the 22-1/2-inch depth typical of most base cabinets. Cabinet shops building or retrofitting runs can use the door-mount feature to tie the pullout to existing door hardware. Homeowners replacing an older single-bin unit who want to add a recycling stream alongside the trash can step up to this double configuration without needing a wider opening than the 18-inch minimum.
A top-mount unit attaches its slide hardware at the top of the carriage, above the bins. A bottom-mount unit runs the slides under the bin or along the cabinet floor. Top-mount is often preferred when there is low clearance at the bottom of the cabinet or when plumbing limits floor-level hardware.
Yes. Two 35-quart white bins are included with the unit. Lids are not referenced in the source data as included; confirm lid availability separately if needed.
The unit is door-mount compatible. Confirm whether the door-mount bracket ships as part of this SKU or is a separate accessory before ordering if door attachment is required for your install.
The source data provides a single minimum opening of 18 inches wide, 18 inches high, and 22-1/2 inches deep. Face-frame versus frameless specific fitment values are not stated; measure the clear interior opening of your cabinet before ordering.
This top-mount double pullout puts two 35-quart bins behind a single cabinet door in an 18-inch opening, handling everyday trash and recycling in one clean, door-mounted unit.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  FYPDMTM15-2-35WH Mfr# PDMTM15-2-35WH | Knape and Vogt PDMTM 15" Birch 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, PDMTM15-2-35WH | ||||
Sold in: 1 Each | FYPDMTM175-2-35WH Mfr# PDMTM175-2-35WH | Knape and Vogt PDMTM 17-1/2" Birch 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, PDMTM175-2-35WH | ||||
Sold in: 16 Each | FYPDMTM21-2-35WH Mfr# PDMTM21-2-35WH | Knape and Vogt PDMTM 21" Birch 2-35 Quart Top-Mount Waste Pullout with White Bins and Standard Slides, PDMTM21-2-35WH |