Knape and Vogt TSC 14-1/2" Birch 1-35 Quart Top-Mount Waste Pullout with White Bin and Soft-Close Slides, TSC15-1-35WH
Description
Knape And Vogt Top Mount Trash Pullout Use
Knape and Vogt top mount trash pullout TSC15-1-35WH provides a single 35 quart white waste bin on a top-mount frame, turning a standard cabinet opening into a dedicated waste station that stays aligned with the cabinet interior. The KV TSC Series is described as KV's premium line of top mount trash pull-outs, so this model is designed as part of that series for consistent fit and operation with other TSC units in a kitchen run. The 14-1/2 inch width single bin format suits cabinets built around that opening size, giving installers a defined target when planning layouts. A soft-close slide system is built into this waste pull-out, so the unit closes in a controlled motion, which helps keep the bin from slamming against the cabinet frame during everyday use. The white bin color matches common light cabinet interiors, providing a neutral look when the pullout is extended in a finished kitchen.
Key TSC15-1-35WH Details For Cabinet Projects
- The KV TSC Series is KV's premium line of top mount trash pull-outs, so this unit aligns with that series for projects that standardize on a single top-mount platform across multiple cabinets.
- This model is a single bin unit with a 35 quart bin, giving a defined waste capacity per cabinet bay that helps balance trash volume with available base cabinet space.
- Single bin units are available in 35 quart and 50 quart versions, and this specific TSC15-1-35WH configuration uses the 35 quart size for projects prioritizing a moderate-capacity pullout.
- Single bin units come in 11-1/2 inch and 14-1/2 inch width versions, and this product is the 14-1/2 inch version intended for cabinet openings that match that wider layout.
- All FYTSC Series come fully assembled, so this waste pull-out arrives as a built unit, which eliminates individual assembly steps during cabinet installation work.
- Weight capacity is 30 lb maximum per bin, not to exceed 80 lb of total weight, so load planning for waste and any added contents can follow those limits to keep slides performing as designed.
Top Mount Waste Pullout Installation Context
This product belongs to the Top Mount Trash Pullouts class, meaning the frame mounts to the cabinet from above and integrates with a face-frame or frameless interior as designed. The 14-1/2 inch width single bin layout gives a fixed frame footprint, which helps when spacing adjacent cabinet hardware such as sink plumbing or other pull-outs. Door mount brackets are included with all of the TSC series trash pull outs, so this model provides a way to secure the cabinet door directly to the pullout frame for integrated door-and-bin operation. The soft-close slides in this TSC series pull-out guide the bin back into the cabinet in a controlled travel, which helps maintain alignment between the mounted door and the cabinet front over repeated use.
Using This KV TSC Series Trash Pullout
Where This 14-1/2 Inch Waste Pullout Fits Best
This Knape and Vogt TSC15-1-35WH waste pullout is part of the Kitchen & Bath Cabinet Accessories trash pull-outs category, so it is intended for use in cabinet-based kitchen or bath layouts that dedicate a bay to waste storage. Its 14-1/2 inch single bin configuration aligns with cabinet designs that allocate that specific interior width to a pull-out, helping designers center the bin under a work area or near a sink. The 35 quart white bin gives a mid-size waste capacity that works within a single base cabinet while still leaving other cabinets free for storage or additional hardware. Waste bins in this TSC series are available in white and platinum colors, and this model uses the white version, which allows coordination with other white interior components when specifying multiple pull-outs on the same project. Single bin units in the series come in both 35 quart and 50 quart versions, and the selection of the 35 quart option reflects a balance between bin depth and the vertical space typically available under a counter in many kitchen cabinet lines.
Details That Support Consistent Operation And Replacement
The KV TSC Series uses soft-close slides on this top-mount trash pull-out, so each close cycle is damped, helping reduce impact on the cabinet and on the bin over time. The 30 lb maximum weight per bin, with a total system limit of 80 lb, defines how much material this pull-out is intended to carry, which is important when planning for heavy waste streams. Door mount brackets are included with all of the TSC series trash pull outs, so this model can be set up so that the cabinet door and bin travel together, keeping the door gap consistent with neighboring fronts. Replacement bins are sold separately for this series, so when a bin needs to be swapped out, the frame and soft-close slides can continue in service while only the bin is replaced. Lids can be purchased separately for the TSC series, giving projects the option to add a lid to the waste bin while retaining the same pullout frame and part number. The manufacturer part number TSC15-1-35WH clearly identifies this specific 14-1/2 inch single 35 quart white bin configuration within the KV TSC family, aiding future ordering when matching additional cabinets or planning replacements on long-term accounts.
Common Questions About TSC15-1-35WH Trash Pullout
What type of cabinet application is the TSC15-1-35WH designed for?
The TSC15-1-35WH is a top mount trash pull-out in the Kitchen & Bath Cabinet Accessories trash pull-outs category, so it is designed for cabinet-based kitchen or bath waste storage applications.
What is the waste capacity of this Knape and Vogt top mount trash pullout?
The TSC15-1-35WH is a single bin unit with a 35 quart white bin, providing a defined waste volume for one cabinet bay in a kitchen or bath layout.
How wide is the TSC15-1-35WH single bin pullout frame?
The TSC15-1-35WH uses the 14-1/2 inch width single bin configuration, so it fits cabinet openings designed around that width for proper top-mount installation and slide travel.
What weight can the soft-close waste pullout support in use?
This KV TSC series pull-out has a weight capacity of 30 lb maximum per bin, not to exceed 80 lb of total weight, guiding load planning for trash and related contents.
How does the soft-close feature affect daily cabinet operation?
The TSC15-1-35WH uses soft-close slides, so the bin closes with controlled motion, which reduces slamming against the cabinet frame during everyday opening and closing.
Can the bin or lid be replaced without changing the entire pullout?
For the TSC series, replacement bins are sold separately and lids can be purchased separately, allowing bin or lid changes while retaining the existing top-mount pullout frame.
Selecting This Soft Close 35 Quart Trash Pullout
The Knape and Vogt TSC15-1-35WH soft close 35 quart trash pullout pairs a 14-1/2 inch top-mount frame with a white 35 quart bin, giving a defined solution for cabinet-based waste storage. Its 30 lb per bin rating, soft-close slides, door mount brackets, and role within the KV TSC premium top mount trash pull-outs line provide clear parameters for projects standardizing on this configuration. For kitchen or bath cabinet runs calling for a single 35 quart white bin on a top-mount, soft-close platform, this TSC15-1-35WH model from Wurth Baer Supply offers a clearly identified option by part number.
