Festool standard saw blade 495379 is an 8-1/4 inch diameter circular saw blade with a 30mm arbor that delivers a known fit on the specified saw and a consistent cutting path for repeatable work. The blade is designed as a general purpose coarse cutting rip solution, so it clears material quickly when pushing through solid stock where throughput matters more than a fine edge. Its 18 tooth count works together with the coarse rip design to move chips efficiently, keeping the cut moving in thicker or longer pieces without bogging as quickly. The blade is carbide tipped, so the tungsten carbide cutting edges stand up to repeated passes in wood and similar materials before needing service. An ATB, or alternating top bevel, tooth geometry lets the blade handle both ripping and crosscut tasks, helping one blade cover more setups on the same saw.
This blade is specified for use on FJ561188, identified as the Festool TS 75 EQ, so its diameter, arbor size, and design are aligned to that track saw platform for proper running. The 30mm arbor mates to the TS 75 EQ spindle interface, which supports stable clamping and precise centering when the flange is tightened. Because the blade is an 8-1/4 inch diameter model, it works within the TS 75 EQ depth-of-cut range, which allows the saws plunge capability to reach into building panels, wood, and soft plastics as listed. Being described specifically for the TS 75 EQ helps set this blade apart from more generic circular saw blades that do not match that saws arbor and guard geometry.
The web description states that this standard saw blade is for use on building panels, wood, and soft plastics, so it is built around the materials typically processed with a track saw on site or in the shop. On building panels, the 18 tooth coarse cutting rip design moves through thicker sandwich constructions efficiently, which is useful when sizing pieces to length or width without repeated passes. In solid wood, the general purpose designation indicates the blade can handle both along-the-grain ripping and crossgrain cuts, so one setup can cover framing components, trim blocking, or similar pieces within the saws depth range. When working in soft plastics, the carbide tipped ATB teeth present sharp edges and alternating bevels to the material, which helps the blade engage and clear the cut path while following the saws guide track. Having one blade specified for these three material groups gives the installer or shop a consistent option when jobs alternate between them.
The blade uses an ATB, or alternating top bevel, tooth geometry, so every other carbide tooth is ground to lean left or right, which helps score fibers as it cuts and supports both ripping and crosscutting in wood-based products. That geometry matters on a track saw like the TS 75 EQ because it allows the blade to follow the guide rail line while producing a cut suited to general assembly work. The coarse cutting rip description ties directly to the 18 tooth count, since fewer teeth on this 8-1/4 inch diameter blade mean deeper gullets between teeth that carry away chips effectively. In thick building panels or solid wood, those deeper gullets reduce the tendency for the kerf to pack with chips, so the saw motor can maintain its speed under load more easily. The tungsten carbide tips bonded to each tooth present a hard, wear-resistant cutting edge at the ATB angle, which keeps the blade performing to its intended geometry over extended runs in wood and soft plastics before sharpening is needed.
The Festool 495379 blade is noted for use on FJ561188, identified as the TS 75 EQ, so its 8-1/4 inch diameter and 30mm arbor are matched to that specific Festool track saw.
The Festool 495379 saw blade has an 8-1/4 inch diameter with a 30mm arbor, which defines how it mounts on the saw and the depth of cut range it can achieve.
The Festool 495379 blade has 18 teeth, giving it a coarse cutting profile that supports faster ripping and general sizing cuts in suitable materials.
The Festool standard saw blade 495379 is described for use on building panels, wood, and soft plastics, aligning with typical tasks handled by the TS 75 EQ track saw.
The 495379 blade uses ATB, or alternating top bevel, tooth geometry, which supports both ripping and crosscutting tasks on wood and similar panel materials.
The Festool 495379 saw blade is described as carbide tipped with tungsten carbide, so its cutting edges are designed for extended wear in wood and soft plastics.
The Festool standard saw blade 495379 combines an 8-1/4 inch diameter, 30mm arbor, and 18 tooth ATB layout in a carbide tipped design that is specified for the TS 75 EQ. For building panels, wood, and soft plastics, its general purpose coarse cutting rip description positions it as a workhorse option when production speed and dependable carbide edges are the priority. For projects centered on that Festool track saw platform and these materials, this blade from Wurth Baer Supply aligns the saw, arbor, and tooth geometry into a single ready-to-use choice.
Sold In: 1 Each