Knape And Vogt USC Waste Pullout For Cabinets

Knape and Vogt USC waste pullout is a bottom mount trash pullout that keeps two 50 quart white bins on a guided slide system, so trash stays contained and moves straight out of the cabinet instead of dragging on the floor or door. The unit is part of the KV USC Series, which is described as KV's premium line of soft close trash pull-outs, so the slide action pulls the weight back into the cabinet smoothly and prevents the unit from slamming shut. A unique washable solid backsplash and solid floor keep debris from falling through to the cabinet floor, so the interior stays cleaner and residue does not collect under the frame. The solid surfaces are described as easy to clean, which helps maintain a presentable cabinet interior in busy kitchens.

Key Trash Pullout Details That Support Daily Use

• The unique washable solid backsplash and solid floor form a continuous surface under and behind the bins, so spills and crumbs stay on the pullout where they can be wiped away instead of accumulating on the cabinet bottom.
• Heavyweight ball bearing slides are concealed, so the moving hardware is hidden for a clean look while still carrying the rated loads smoothly along the full extension path.
• The unit is a double bin design with two 50 quart white bins, so a single cabinet opening can handle higher volume trash or a basic two-stream waste setup without changing the cabinet structure.
• Double bin units are 14-13/16 inches wide, so the installer can plan cabinet interior clearances and door layout around a known, fixed frame width when laying out a run of base cabinets.
• All KVUSC Series come fully assembled and install with four screws, so mounting time is focused on positioning the frame in the cabinet rather than building individual components on site.
• Waste bins are available in white and platinum, so a shop can match the bin color to different kitchen finishes from the same product line when selecting models.

Bottom Mount Waste Pullout Installation And Fit

This Knape and Vogt bottom mount trash pullout installs directly to the cabinet floor, giving installers a stable base reference rather than relying on sidewalls that may vary. All KVUSC Series come fully assembled and install with four screws, which streamlines the installation sequence because the frame, slides, and bin supports are pre-aligned from the factory. Double bin units are 14-13/16 inches wide, so the frame width is fixed for layout, helping with planning door overlays and interior clearances around plumbing or other cabinet components. The heavyweight ball bearing slides are concealed, so the hardware hides beneath the frame while still delivering the soft close motion described for this KV premium line.

Using This Double Bin Soft-Close Pullout In Projects

Where This Bottom Mount Trash Pullout Works Best

This Knape and Vogt USC 15-3/8 inch white bottom mount waste pullout with 2-50 quart white bins fits into kitchen and bath cabinet layouts that need a contained, slide-out waste area rather than freestanding cans. The product sits in the Kitchen & Bath Cabinet Accessories category under Trash Pull-Outs, so it is positioned for built-in waste management within base cabinetry. Double bin units are 14-13/16 inches wide, making the frame suitable for cabinet openings that can support that interior width while still providing clearance around hinge hardware. The weight capacity is 30 lb maximum per bin, not to exceed 100 lb of total weight, so the pullout is intended for typical household trash, recyclables, or similar loads rather than unusually heavy materials.

Why The USC18-2-50WH Details Support Reliable Results

The manufacturer part number USC18-2-50WH identifies this specific Knape and Vogt USC Series model, so shops can reorder the same configuration for repeat projects without re-sourcing dimensions or performance details. The KV USC Series is described as KV's premium line of soft close trash pull-outs, which means the integrated soft-close mechanism and concealed heavyweight ball bearing slides are designed to bring the loaded frame back into the cabinet in a controlled way, reducing impact on the cabinet face over time. The unique washable solid backsplash and solid floor prevent debris from falling through to the floor and are easy to clean, helping reduce cabinet bottom repairs that can follow long-term liquid and food exposure. Door mount brackets are built into the frame, so the door connection point is part of the same rigid structure that carries the slides, supporting alignment between the door and the pullout movement across repeated openings.

Common Questions About The USC18-2-50WH Pullout

Selecting This Soft Close Pullout For Your Cabinet Run

The Knape and Vogt USC18-2-50WH bottom mount trash pullout combines two 50 quart white bins, soft close action, and concealed heavyweight ball bearing slides in a single preassembled frame, so it drops into base cabinets as a ready waste solution. With a 14-13/16 inch wide double bin frame, a 30 lb maximum weight rating per bin, and built-in door mount brackets, it gives cabinet shops and installers defined parameters for layout and mounting. For projects needing a soft close, floor-mounted waste pullout within the KV USC Series, this model aligns the bin volume and mounting style with typical kitchen and bath cabinet construction.