3-1/2 Inch Coffee Cup Holder Grommet Use
3-1/2 inch coffee cup holder grommet describes a one piece plastic grommet with a solid bottom that is designed to hold a cup in a 3-1/2 inch bore hole, so a drilled opening in a work surface becomes a stable cup location. The grommet design keeps the cup contained within the hole, which helps keep beverages positioned instead of sliding on a flat surface. The solid bottom supports the cup base, so liquid rests on plastic rather than the underlying shelf or panel. This Hardware Concepts, Inc. 6135-029 part functions as a coffee cup holder, so it organizes a cup in a fixed spot on a desk, counter, or cabinet top. The plastic construction provides a uniform contact surface around the cup, which helps maintain consistent fit in daily use.
Key Coffee Cup Holder Grommet Details
- The 3-1/2 inch bore hole diameter specification means the grommet fits into a 3-1/2 inch drilled opening, so installers can match hole sizing to the stated dimension for predictable seating in panels.
- The one piece plastic construction means the grommet body is molded as a single unit, so there are no separate parts to align when placing it into the bore hole during installation.
- The solid bottom design means the grommet base is closed, so any condensation or minor drips from a cup rest on the grommet rather than passing through the hole to the cabinet or surface below.
- The product role as a coffee cup holder means the grommet is intended to receive and locate a cup, so the drilled opening becomes a defined beverage position on a workspace or furniture component.
- The listing as a grommet in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category means it is intended for fixed installation in panels, so it becomes part of the work surface layout.
Cup Holder Grommet Fit And Bore Hole Setup
The specified 3-1/2 inch bore hole diameter defines the cutout size needed, so installers can drill this dimension before pressing the Hardware Concepts, Inc. 6135-029 grommet into the work surface. The round form matches the described 3-1/2 inch bore, so a standard round hole cutter can be used to prepare the opening. Because the grommet is a one piece plastic part, it drops into the pre-cut hole as a single component, which simplifies the installation step in shop or on-site conditions. The solid bottom construction means the bottom of the bore hole does not need a separate closure plate, since the grommet itself closes the opening where the cup rests.
Using This Coffee Cup Holder Grommet In Workspaces
Where This Plastic Coffee Cup Holder Fits Best
This Hardware Concepts, Inc. 6135-029 grommet is identified as a coffee cup holder for a 3-1/2 inch bore hole, so it is suited to desks, counters, and work surfaces where a drilled opening is acceptable. The solid bottom configuration holds the cup within the grommet body, so the underside of the panel remains covered below the hole. Because it is categorized under Multimedia and Workspace Components and Shelf, Closet & Garage Organization, it aligns with cabinet, office, and storage layouts that incorporate fixed openings for specific items. The round cup holder format allows the bore hole to be placed in a convenient corner or edge zone, so the surface retains general working area while still providing a set spot for a beverage. The grommet form factors the opening into a finished edge, so the cutout perimeter is hidden by the plastic rim.
Details That Support Repeatable Cup Holder Results
The defined 3-1/2 inch bore hole diameter on this cup holder grommet from Hardware Concepts, Inc. allows consistent drilling from project to project, so shops can standardize a single bit or cutter for multiple surfaces. The one piece plastic design removes any multi-part assembly steps, so installation is essentially the same each time: drill the specified hole, then seat the grommet. The solid bottom supports the base of the cup every time it is placed into the holder, so the cup rests on a predictable surface instead of an exposed panel cutout. As a grommet within the Shelf, Closet & Garage Organization class, it functions as a permanent component of the panel, so once installed it behaves like a fixed part of the furniture or workspace. The manufacturer part number 6135-029 uniquely identifies this configuration, so the same cup holder geometry can be reordered for matching future work.
Common Questions About This Coffee Cup Grommet
What bore hole size does the 6135-029 grommet fit?
The Hardware Concepts, Inc. 6135-029 grommet is specified for a 3-1/2 inch bore hole diameter, so panels are drilled to that size for the coffee cup holder to seat properly.
How does the solid bottom affect cup placement?
The solid bottom on this coffee cup holder grommet supports the base of the cup, so liquids and condensation rest on plastic instead of reaching the surface below the hole.
What type of product is the 6135-029 part?
The 6135-029 part is a one piece plastic cup holder grommet with a solid bottom, so it functions as a coffee cup holder set into a 3-1/2 inch bore hole.
Where is this coffee cup holder typically used?
This coffee cup holder grommet is categorized under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, so it is suited to desks, cabinets, and workspace panels.
Why is the one piece plastic design useful?
The one piece plastic construction keeps the grommet as a single molded unit, so installation into the 3-1/2 inch bore hole does not require assembling separate components.
How does this grommet help organize a workspace?
This coffee cup holder grommet provides a fixed, recessed location for a cup in the work surface, so the panel gains a defined beverage spot while preserving surrounding flat area.
Selecting This Cup Holder Grommet For Projects
The Hardware Concepts, Inc. cup holder grommet with a 3-1/2 inch bore hole diameter and solid bottom offers a defined coffee cup holder position in desks, cabinets, and workspace panels. The one piece plastic construction keeps installation straightforward once the 3-1/2 inch opening is drilled. For projects that benefit from a recessed, contained cup location in a work surface, this 6135-029 coffee cup holder grommet provides a consistent hole size, solid base support, and a finished rim around the cutout for a clean result.
