3-Piece Wire Grommet For Clean Wire Pass-Through

3-piece wire grommet describes a Hardware Concepts, Inc. solution designed around a grommet hole liner with two matching caps so wires pass through a finished opening instead of a raw cutout, which helps protect the surface around multimedia and workspace cutouts. The 6385 5-1/4" x 2-7/16" 3-Piece Wire Grommet, Almond pairs that oval opening size with a coordinated almond finish so installers can match common furniture and casework colors in offices, closets, or workstations. The grommet hole liner defines the 5-1/4" by 2-7/16" opening, which helps control the edge of the cutout and gives a consistent reveal when the cap is installed. The almond finish ties into light-toned surfaces so the pass-through reads as a planned component on desks, shelving, or media cabinets where wires need a permanent route.

Wire Grommet Details That Support Daily Use

• The liner, round cap, and oval cap form a three-piece grommet set that lets installers choose cap geometry for the way wires route at the surface, so the pass-through matches the furniture layout.
• Both caps have a fixed hole cut out for wires, which keeps cable openings neat and controlled so cords exit in a repeatable position instead of spreading across the edge of the cutout.
• The 5-1/4" x 2-7/16" overall size defines the cutout envelope, helping installers plan openings on desktops, closet panels, or workspace components with predictable spacing from edges.
• The fine pebble texture noted in the description gives the almond grommet a low-gloss, tactile surface that blends with many laminate and painted finishes, helping the opening visually recede.
• The 3PC oval wire grommet 5" x 2-1/4" almond SAP description reinforces the oval layout and finish, so specifiers can match project documents to this exact part during ordering and layout.

Oval Wire Grommet Fit For Panel Cutouts

The 5-1/4" x 2-7/16" 3-piece wire grommet size guides installers toward an oval cutout sized for the liner, which supports a snug fit in desktops, shelf panels, or similar components. The oval wire grommet 5 x 2-1/4 almond SAP description highlights the oval footprint, so drafters can call out this shape when planning openings for wire management in multimedia or workspace layouts. Because the grommet centers around a dedicated hole liner, the edge of the cutout is hidden once the liner is seated, so slight variations at the cut disappear under the trim. The dedicated liner in this Hardware Concepts, Inc. grommet also defines a consistent wall thickness at the opening, which helps the fixed hole in either cap stay centered for predictable cable routing.

Using This Almond Grommet In Workspaces

Where This 3-Piece Wire Grommet Works

The 6385 5-1/4" x 2-7/16" 3-piece wire grommet aligns well with multimedia and workspace components because its category specifically tags it for those environments, helping designers route power or data cables through desktops and work surfaces. The same product also sits in the shelf, closet, and garage organization category, so installers can carry wire paths through closet panels, organizational systems, or garage workbenches using a coordinated almond finish. The grommet hole liner lets these applications share a consistent edge treatment wherever the oval opening is cut, maintaining a similar look across multiple panels or stations. Both the round cap and the oval cap share the same fixed hole cut out for wires, which lets closets and workstations present the same cable exit regardless of cap shape.

Why This Grommet Design Supports Repeatable Results

The grommet is made of three pieces - grommet hole liner, round cap, and oval cap - so installers can standardize on a single cutout size while choosing the cap that best suits the direction of wire travel, reducing layout changes between stations. Because both caps have a fixed hole cut out for wires, the point where cables emerge stays stable from panel to panel, which helps maintain alignment between devices, power strips, or desk accessories across a run of furniture. The fine pebble texture on the almond surface manages light reflection at the opening, so the wire pass-through reads as a subtle component rather than a shiny focal point on the panel. Using a named part from Hardware Concepts, Inc. with manufacturer part number 6385-029 allows shops to tie drawings, cut lists, and purchasing back to the same 3-piece wire grommet, which supports consistent fit and finish across repeat projects or future expansions.

Practical Questions About This Almond Wire Grommet

Select This Grommet For Coordinated Wire Management

The 6385 5-1/4" x 2-7/16" 3-piece wire grommet, almond, from Hardware Concepts, Inc. pairs a defined oval opening with both round and oval caps so installers can route wires cleanly through desks, shelves, or organizational panels. The almond color and fine pebble texture help the wire pass-through sit comfortably on light-toned furniture, while the fixed hole cut out in each cap keeps cable exits consistent project to project. Wurth Baer Supply lists this 3PC oval wire grommet 5" x 2-1/4" almond by manufacturer part number 6385-029 and SAP description, giving shops a clear way to specify, order, and repeat this wire management detail across multiple installations.