Liberty Satin Nickel Cup Pull For Cabinets

Liberty satin nickel cup pull gives a cabinet or drawer a defined grip point in a compact footprint, which matters when laying out consistent hardware lines on face frames or slab fronts. The Cup Pulls II Series identity ties this pull to a known Liberty Hardware collection, which helps keep hardware styles coordinated across a project. The 4-3/16 inch length provides a visual span wider than the hand contact area, which helps the pull sit proportionally on typical drawer fronts. A 2-1/2 inch center to center dimension sets the hole spacing, which is critical when drilling new fronts or aligning to existing bores. The 1-3/16 inch width sets how much vertical space the pull occupies on a rail, which helps with clearance around panel details. A 1-1/4 inch projection moves the gripping edge off the surface, which creates finger room while keeping the pull relatively close to the cabinet.

Key Cup Pull Details That Support Your Work

• The 2-1/2 inch center to center spacing fixes the mounting hole layout, which streamlines jig setup when repeating this pull across multiple doors or drawers.
• The 4-3/16 inch overall length spreads the pull across a wider section of the front, which provides a balanced look on small to medium cabinet faces.
• The 1-3/16 inch width defines the vertical footprint, which helps position the pull to clear edge profiles or neighboring hardware without crowding the panel.
• The 1-1/4 inch projection brings the grab point forward from the surface, which provides practical finger clearance while staying low profile around passing traffic.
• The satin nickel finish establishes a muted metallic look, which pairs with other satin nickel decorative hardware and supports consistent finish selection across a room.
• The Liberty Hardware brand and PN1053-BSN-C part number identify this exact model, which helps match existing installations or specify the same pull for repeat jobs.

Mounting Dimensions For Consistent Cup Pull Layout

The 2-1/2 inch center to center measurement defines the exact distance between mounting points, which lets you set up drilling templates for reliable, repeatable hole placement. With a 4-3/16 inch overall length, the pull covers the drilled area with generous margin, which helps conceal slight drilling deviations on the front surface. The 1-3/16 inch width establishes how far the pull extends vertically, which assists in laying out from door or drawer edges to maintain uniform reveals. The 1-1/4 inch projection controls how far the pull stands off the cabinet, which influences both hand access and how close doors or drawers pass adjacent surfaces.

Using This Liberty Cup Pull On Cabinet Projects

Where This Satin Nickel Cup Pull Fits Best

This Liberty Hardware cup pull from the Cup Pulls II Series is suited to cabinet and drawer applications where a 2-1/2 inch center to center pattern is desired, because that spacing sets the underlying mounting grid. The 4-3/16 inch length works well on many residential cabinet drawers and doors, since it spans enough width to look intentional without overpowering narrower fronts. The 1-3/16 inch width lets the pull sit comfortably on rails or flat drawer faces, which is useful when working around panel profiles or narrow framing. With a 1-1/4 inch projection, the pull stands far enough off the surface for fingers to catch the underside of the cup shape, which supports easy opening motions. The satin nickel finish coordinates with other satin nickel decorative hardware and moldings, which helps maintain a unified hardware appearance throughout a kitchen, bath, or built-in.

Details That Help Repeatable Mounting And Replacement

The 2-1/2 inch center to center value gives a fixed dimension for both new work and replacement scenarios, which simplifies swapping in this pull where the same hole spacing already exists. When drilling new fronts, that same center to center dimension lets installers rely on standard jigs that support 2-1/2 inch patterns, which reduces layout time over multiple openings. The 4-3/16 inch length provides coverage beyond the hole area, which can visually soften minor left-right drilling variations when cabinets are viewed in a run. The 1-3/16 inch width and 1-1/4 inch projection together define the three-dimensional envelope of the pull, which is important when evaluating clearance near adjacent doors, drawer fronts, or surrounding trim. Using the manufacturer part number PN1053-BSN-C as the reference detail ties each order and drawing to this exact satin nickel cup pull, which supports consistent hardware selection across phases of a project.

Common Questions About Liberty PN1053-BSN-C Cup Pull

Choose This Cup Pull For 2-1/2 Inch Layouts

The 2-1/2 inch center to center drilling pattern, 4-3/16 inch length, and 1-1/4 inch projection make this Liberty satin nickel cup pull a practical match for many cabinet and drawer fronts. The Cup Pulls II Series identity and PN1053-BSN-C designation clearly define the model, which supports consistent hardware selection across projects. For cabinet work that calls for a satin nickel cup pull with these specific mounting dimensions, this Liberty Hardware option aligns cleanly with that requirement.