Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Liberty polished chrome cup pull PN1053-PC-C is a zinc die cast cabinet handle designed to give a smooth hand grip while matching other polished chrome decorative hardware. The 4-3/16 inch length spans typical cabinet face frames, so the pull looks balanced across drawer fronts without crowding the panel edges. Its 2-1/2 inch center to center mounting layout lines up with a common drill pattern, which helps when aligning multiple pulls across a bank of drawers. The 1-2/9 inch projection sets the grip out from the drawer face, allowing fingers to hook behind the cup shape without scraping knuckles. A 1-2/3 inch width keeps the profile compact, so the pull sits neatly on narrower drawer rails while still covering the mounting area. The polished chrome finish reflects surrounding light, tying in with other chrome components in the same run of cabinets.
The 2-1/2 inch center to center spacing on this Liberty Hardware cup pull gives a fixed reference for drilling, so installers can quickly set up jigs or templates and repeat the same hole pattern across a full cabinet run. With a 4-3/16 inch overall length, there is enough material on each side of the fastener points to center the pull on common drawer widths without the ends looking cramped. The 1-2/9 inch projection defines how far the pull stands off the face, which affects finger clearance when mounted above face-frame rails or countertop overhangs. At 1-2/3 inch width, the pull fits comfortably on narrower fronts while fully covering the mount area, helping the finished installation look clean and intentional on every piece.
This Liberty Hardware cup pull from the Cup Pulls II collection is built for use on cabinet doors and drawers where a cup-style grip is preferred. The zinc die cast construction suits interior cabinetry in kitchens, baths, and built-ins that use metal decorative hardware. Its polished chrome finish aligns with polished chrome hinges, knobs, and other pulls from the same space, supporting a consistent hardware line across multiple cabinet sections. With a 4-3/16 inch length and 1-2/3 inch width, the pull scales well on standard drawer fronts and pairs cleanly on smaller utility drawers, so one part number can handle a range of cabinet sizes. The 2-1/2 inch C C mounting makes this a practical choice for updating cabinets already drilled to that spread, helping maintain existing layouts while changing the hardware style.
The specified 2-1/2 inch center to center dimension gives a precise anchor point for drilling jigs, allowing installers to mark and bore repeatable holes across many doors and drawers using the same setup. The 8-32 x 1 inch screw size specification means the cup pull is designed around a standard cabinet fastener thread, which simplifies sourcing compatible screws on site and keeps replacements straightforward. Zinc die cast construction produces a rigid pull body that sits flat against the cabinet surface when tightened, helping keep the cup aligned and preventing twist across the mounting line. The 1-2/9 inch projection and 1-2/3 inch width together define the footprint on the front, so spacing from edges and neighboring hardware can be planned in advance for symmetrical results. The polished chrome surface adds a reflective finish that reads cleanly once aligned, highlighting straight runs of hardware along drawer banks.
The Liberty PN1053-PC-C cup pull uses 2-1/2 inch center to center spacing, which helps align drills or jigs for consistent hole placement on cabinet doors and drawers.
The cup pull has a 4-3/16 inch overall length, giving enough span to look balanced on typical drawer fronts while leaving margin from the panel edges.
The pull is zinc die cast, providing a solid metal body that holds alignment against the cabinet face when the mounting screws are tightened.
The pull projects 1-2/9 inch from the surface and is 1-2/3 inch wide, creating finger clearance while keeping a compact footprint on the drawer front.
The cup pull has a polished chrome finish, so it visually matches other polished chrome decorative hardware in the same cabinet installation.
The cup pull is specified with 8-32 x 1 inch screws, aligning with a common cabinet screw thread for straightforward mounting and future replacement.
The Liberty PN1053-PC-C polished chrome cup pull combines 2-1/2 inch center to center spacing with a 4-3/16 inch body, giving installers a dependable pattern for new or replacement cabinet work. Put this zinc die cast pull to use where a consistent polished chrome look and repeatable drilling layout streamline the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  LAPN1053-OB3-C Mfr# PN1053-OB3-C | Liberty Hardware Cups Cup Pull 4-3/16" (106 mm) Long, Dark Oil Rubbed Bronze, PN1053-OB3-C | ||||
Sold in: 1 Each |  LAPN1053-BSN-C Mfr# PN1053-BSN-C | Liberty Hardware Cups Cup Pull 4-3/16" (106 mm) Long, Satin Nickel, PN1053-BSN-C |